WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7150

Browse

Filters

2008 - 200932010 - 2019142020 - 20225

Settings

Institution Author: search.filters.institutionAuthor.Dede, Mehmet İsmet CanWoS Q: search.filters.wosQuartile.N/A

Search Results

Now showing 1 - 10 of 22
  • Conference Object
    Citation - WoS: 1
    Citation - Scopus: 1
    Modeling a Magneto-Rheological Fluid-Based Brake Via a Neural Network Method
    (Springer international Publishing Ag, 2022) Kucukoglu, Sefa Furkan; Dede, Mehmet Ismet Can; Ceccarelli, Marco
    Identifying the model of a magneto-rheological (MR) fluid-based brake is extremely important for designing and controlling a haptic device with hybrid actuation. Therefore, in this study, an Elman Recurrent Neural Network (ERNN) is designed to understand and model a characterization of an MR fluid-based rotational brake. Three important factors that affect the MR brake's performance are chosen as inputs: current, speed, and the first derivative of the input current. The proposed network is trained, and the performance of the network is tested with three different experimental scenarios. Then, the effect of these inputs on the system is investigated. According to the results, it can be said that the designed ERNN is a good candidate for modelling an MR brake.
  • Conference Object
    Citation - Scopus: 1
    Kinematic Representation of a Biomimetic Squid Soft Robot's Arms in a Simulation Environment
    (Springer international Publishing Ag, 2022) Emet, Hazal; Dede, M. I. Can
    Biomimetic robot systems have received attention from researchers and in accordance the implementation of soft robotic arms has been studied. Kinematic and dynamic modeling of robots with infinite degrees of freedom is challenging and a number of methods have been proposed. In this work, a procedure is proposed to represent soft robot arm motion in a simulation environment. A biomimetic squid robot is used as a case study. This robot's soft arms are modeled by using the Piecewise Constant Curvature approach. This model is visualized by discretizing the soft arms into a finite number of rigid-body manipulators in MatLab using its 3D animation toolbox.
  • Conference Object
    Digital Twin of a Servo Driver of a Servo Motor as a First Step Towards a Digital Twin of a Robot Mechanism
    (Springer, 2022) Küçükoğlu, Sefa Furkan; Carbone, Giuseppe; Dede, Mehmet İsmet Can
    Digital Twin (DT) offers us to acquire actual system’s critical information and hence, it may be possible to develop and produce more suitable systems in terms of low energy consumption and effectiveness. In this way, responsible consumption and production systems can be designed and the system’s parameters can be tuned via DT. In this study, the model of a servomotor system that is used for industrial purposes is experimentally obtained. This study consists of two steps. In the first step, within the embedded control of the system, position and velocity control loops are deactivated. Then through the servo driver, currents with sinusoidal waveforms at various frequencies are applied to the servomotor. The resultant angular velocity of the motor is monitored and recorded. The amplitude of the current is kept constant during this study. The frequency of the current, however, is increased logarithmically. By using these data, a first-order transfer function (TF) is identified for the motor model. In the second step, all control loops are activated. Consequently, the total servomotor system could be represented in a digital environment. Furthermore, the static friction issue is overcome by using a Coulomb friction model with stiction effect. Finally, several experiments are conducted and then results are compared with the digital model of the servomotor system. The results clearly show that digital model can fairly represent the physical system.
  • Conference Object
    Tıbbi Uygulamalar için Özgün Yapılı Haptik Cihaz Tasarımı
    (Institute of Electrical and Electronics Engineers Inc., 2009) Selvi, Özgün; Bilgincan, Tunç; Kant, Yalkın; Dede, Mehmet İsmet Can
    Robotik sistemler hassasiyet gerektiren işlerde gün geçtilçe günlük hayatımızın bir parçası olmaya başladı. Bu işler genellikle herhangi bir operatör tarafından yapılamayacak kadar hassasiyet gerektiren işler olduğundan dolayı robotik teknolojiye ihtiyaç vardır. Bir robotik alanı olan Haptik teknolojisi, operatör ile çevrenin etkileşimini kuvvet geri beslemesi ile sağlayarak uygulamanın hassasiyet seviyesini arttırmaktadır. Bugünkü haliyle haptik teknoloji tıbbi operasyonlarda yardımcı sistem olarak ve birçok uzaktan kumandalı operasyonlarında (teleoperasyon) kullanılmaktadır. Aynı zamanda haptik teknoloji askeri ve tıbbi eğitim amaçlı sanal gerçeklik programlarında kullanılmaktadır. Bu çalışmanın amacı sistemin hassasiyetini arttırabilecek yapısal olarak yeni bir haptik cihaz tasarlamaktır. Bu kapsamda, önceden gerçekleştirilmiş robot tasarımları araştırıldı ve kavramsal tasarımlar gelistirildi. Sonuç olarak seçilen tasarım sanal ortam da oluşturuldu ve simülasyonu yapıldı, ve ilk prototipi imal edildi
  • Book Part
    Citation - WoS: 1
    Citation - Scopus: 1
    Calibration Study of a Continuously Variable Transmission System Designed for Phri
    (Springer, 2020) Mobedi, Emir; Dede, Mehmet Ismet Can
    Variable stiffness actuators (VSAs) have been used in many applications of physical human-robot interfaces (pHRI). A commonly employed design is the spring-based VSA allowing the user to regulate the output force mechanically. The main design criteria of these actuation systems are the adjustment of output force independent from the output motion, and shock absorbing. In our recent work, we implemented certain modifications on the two-cone friction drive continuously variable transmission system (CVT) so that the CVT can be employed in pHRI systems. Subsequently, the optimized prototype is developed. In this study, we introduce the prototype of this new CVT systems, and its force calibration tests. The results indicate that the manufactured CVT is capable of displaying the desired output force throughout its transmission ratio range within a tolerance.
  • Conference Object
    Citation - WoS: 1
    Citation - Scopus: 2
    A New Correction Coefficient Formula for the Simplified Dynamic Model of a Surgical Robot
    (Springer international Publishing Ag, 2021) Ayit, Orhan; Dede, Mehmet Ismet Can
    Execution of model-based control algorithms such as computed torque technique requires the knowledge of the dynamic model of the robotic system. In our work, the active part of the surgical robot, NeuRoboScope, has a parallel kinematics architecture and the dynamic model is relatively complicated to run in a microprocessor with limited computing capabilities. For this reason, we formulated a simplified dynamic model to run in the selected microprocessor. In this work, a new formula for calculating the correction coefficients is described to minimize the errors in the whole orientation range of the robot's base platform. This new formula is examined in terms of execution time and the result is reported in this paper.
  • Conference Object
    Citation - Scopus: 1
    Structural Compliance Effects on the Accuracy and Safety of a R-Cube Haptic Device
    (Springer Verlag, 2019) Carbone, Giuseppe; Acinapura, Antonio; Mundo, Domenico; Görgülü, İbrahimcan; Dede, Mehmet İsmet Can
    This paper addresses the contribution of structural compliance on stiffness and safety of a R-CUBE Haptic Device. Structural compliance is determined in several poses via FEM analysis and addressed by referring to local and global indices of performance. Results are also compared with evidences from experimental tests. Comparison of numerical and experimental data allows to identify and separate the contributions to the overall compliance that are due to the structural stiffness, and other contributions such as joint clearance, pose and loading conditions.
  • Conference Object
    Citation - WoS: 17
    Citation - Scopus: 23
    The Arrows Project: Robotic Technologies for Underwater Archaeology
    (IOP Publishing Ltd., 2018) Allotta, Benedetto; Costanzi, Riccardo; Ridolfi, Alessandro; Salvetti, Ovidio; Reggiannini, Marco; Kruusmaa, Maarja; Salumäe, Taavi; Lane, David Mike; Frost, Gordon; Tsiogkas, Nikolaos; Cocco, Michele; Gualdesi, Lavinio; Lacava, Giovanni; Roig, Daniel; Gündoğdu, Hilal Tolasa; Dede, Mehmet İsmet Can; Baines, Steven; Tusa, Sebastiano; Latti, Priit; Scaradozzi, David
    The paper summarizes the main results achieved during the three-year European FP7 ARROWS project (ARchaeological RObot systems for the Worlds Seas). ARROWS concluded at the end of August 2015 and proposed to adapt and develop low-cost Autonomous Underwater Vehicle (AUV) technologies to reduce the operational cost of typical underwater archaeological campaigns. The methodology used by ARROWS researchers identified archaeologists requirements for all the phases of a campaign. These were based on guidelines issued by the project Archaeology Advisory Group (AAG), which comprised of many European archaeologists belonging to the consortium. One of the main goals of the ARROWS project was the development of a heterogeneous team of cooperating AUVs; these comprised of prototypes developed in the project and commercially available vehicles. Three different AUVs have been built and tested at sea: MARTA, characterized by flexible hardware modularity for easy adaption of payload and propulsion systems, U-CAT, a turtle inspired bio-mimetic robot devoted to shipwreck penetration and A-Size AUV, a small light weight vehicle which is easily deployable by a single person. The project also included the development of a cleaning tool for well-known artefacts and maintenance operations. Results from the official final demonstrations of the project, held in Sicily and in Estonia during Summer 2015, are presented in the paper as an experimental proof of the validity of the developed robotic tools.
  • Book Part
    Citation - WoS: 1
    Citation - Scopus: 2
    Experimental Evaluation of Actuation and Sensing Capabilities of a Haptic Device
    (Springer, 2019) Mobedi, Emir; Görgülü, İbrahimcan; Dede, Mehmet İsmet Can
    Haptic devices are used to increase the telepresence level by providing the sense of touch to the human operator. Simultaneously, they capture the targeted motion of the human operator to generate a motion demand for the teleoperated slave system. Considering a scenario where the slave system’s end-effector is handled by the human operator at the master side, which is attached to the haptic device, an ideal haptic interaction involves the feeling of only the end-effector dynamics and the accurate sensation of the end-effector pose. The performance of a haptic device is based on these two functionalities. In this paper, the experimental evaluation of the actuation and sensing capabilities of a haptic device, HIPHAD v1.0 kinesthetic haptic device, is presented.
  • Book Part
    Citation - WoS: 3
    Citation - Scopus: 5
    Design of a Teleoperation Scheme With a Wearable Master for Minimally Invasive Surgery
    (Springer, 2019) Ateş, Gizem; Majani, Ronny; Dede, Mehmet İsmet Can
    Minimally invasive surgery is increasingly being preferred over conventional surgery, however many problems still persist in longer surgeries such as pituitary surgeries, where surgeons are still required to hold an endoscope in their hand for prolonged periods of time. Many modern approaches have recently been proposed in literature to reduce the surgeon’s effort. In this paper we extended upon these previous attempts and presented a promising solution; a real time teleoperation scheme with 3 different modes of operation, composed of a wearable ring system that captures and transmits voluntary hand motions over a wireless connection to a slave system. Accordingly, this slave system processes the received data to generate velocity demands for the robot endoscope controller. Finally, the feasibility of the proposed modes of operation are demonstrated and compared by measuring their learning curve and effort by running a set of training simulations on human subjects.