WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7150

Browse

Filters

2005 - 200912010 - 2019232020 - 20212

Settings

Institution Author: search.filters.institutionAuthor.Demir, Mustafa MuammerPublisher: search.filters.publisher.Elsevier Ltd.

Search Results

Now showing 1 - 10 of 26
  • Article
    Citation - WoS: 7
    Citation - Scopus: 9
    Experimental Apparatus for Simultaneous Measurement of Triboelectricity and Triboluminescence
    (Elsevier Ltd., 2020) Arıca, Tuğçe A.; Topçu, Gökhan; Pala, Atamert; Demir, Mustafa Muammer
    Triboelectricity is a phenomenon caused by the accumulation of opposite electric charges on the surfaces of two different materials as a result of contact with each other. The phenomenon of emitting cold light when the material is subjected to physical deformation is called triboluminescence. This paper presents an experimental apparatus that allows simultaneous measurement of both triboelectricity and triboluminescence of a model composite system based on poly (vinylidene fluoride) (PVDF) and europium tetrakis (dibenzoylmethide) triethylammonium (EuD(4)TEA). While the former component was studied in contact-separation mode giving triboelectricity, the latter emits triboluminescence upon application of mechanical impact. The device was operated at varying range of frequencies from 0.5 to 4.8 Hz and the force in the range of 5.4-9.5 N. (C) 2019 Elsevier Ltd. All rights reserved.
  • Article
    Citation - WoS: 61
    Citation - Scopus: 64
    Electrospun Gelma Fibers and P(hema) Matrix Composite for Corneal Tissue Engineering
    (Elsevier Ltd., 2021) Arıca, Tuğçe A.; Güzelgülgen, Meltem; Yıldız, Ahu Arslan; Demir, Mustafa Muammer
    The development of biocompatible and transparent three-dimensional materials is desirable for corneal tissue engineering. Inspired from the cornea structure, gelatin methacryloyl-poly(2-hydroxymethyl methacrylate) (GelMA-p(HEMA)) composite hydrogel was fabricated. GelMA fibers were produced via electrospinning and covered with a thin layer of p(HEMA) in the presence of N,N?-methylenebisacrylamide (MBA) as cross-linker by drop-casting. The structure of resulting GelMA-p(HEMA) composite was characterized by spectrophotometry, microscopy, and swelling studies. Biocompatibility and biological properties of the both p(HEMA) and GelMA-p(HEMA) composite have been investigated by 3D cell culture, red blood cell hemolysis, and protein adsorption studies (i.e., human serum albumin, human immunoglobulin and egg white lysozyme). The optical transmittance of the GelMA-p(HEMA) composite was found to be approximately 70% at 550 nm. The GelMA-p(HEMA) composite was biocompatible with tear fluid proteins and convenient for cell adhesion and growth. Thus, as prepared hydrogel composite may find extensive applications in future for the development of corneal tissue engineering as well as preparation of stroma of the corneal material. © 2020 Elsevier B.V.
  • Article
    Citation - WoS: 39
    Citation - Scopus: 43
    Tailored Electrospun Fibers From Waste Polystyrene for High Oil Adsorption
    (Elsevier Ltd., 2018) Isık, Tuğba; Demir, Mustafa Muammer
    Recent ship accidents that resulted catastrophic oil spills necessitate producing environmentally friendly, costeffective, and large-scale fabrication technology for oil-sorbent materials. Various material systems have been employed to fabricate sorbent materials; however, using fresh material components as adsorbent can lead to a secondary pollution. Therefore, recycling of plastics wastes for the fabrication of adsorbent material could be a wise approach to handle this environmental issue. In this study, foam-expanded polystyrene (f-PS), a commodity polymer used for insulation and packing materials, was electrospun from solution mixture of THF and DMF. Surface and interior porosity were achieved from individual fibers electrospun froma composition of DMF: THF (1:3) at 20-wt% of solid f-PS content. The resulting adsorbents exhibited a considerable hydrophobicity (WCA approximate to 120 degrees) and oleophilicity (CA approximate to 10 degrees), which can selectively adsorb both vegetable and engine oils from polluted waters. The porosity of the fibers has significant effect on the sorption capacity and separation efficiency up to 124 g/g and 99%, respectively. Thus, electrospun mats of the polystyrene wastes offer a promising adsorbent for the remediation of oily wastewaters. (C) 2018 Published by Elsevier B.V.
  • Article
    Citation - WoS: 30
    Citation - Scopus: 32
    Perylene-Embedded Electrospun Ps Fibers for White Light Generation
    (Elsevier Ltd., 2019) Güner, Tuğrul; Aksoy, Erkan; Demir, Mustafa Muammer; Varlıklı, Canan
    Perylene dyes have been employed in the fabrication of white light due to their superior photophysical properties and relatively easy synthetic methods. However, their molecular aggregation in solid state is one of the main handicaps since it causes deviation in their optical properties and quenches photoluminescence quantum yields (Phi(f)). Investigation of the photophysical properties of a green (PTE), a yellow (PDI) and a new red (DiPhAPDI) emitting perylene derivative in solution, drop-casted films, polystyrene (PS) fibers and PS fibers embedded in poly (dimethyl siloxane) (PDMS) showed that PS:dye fibers prevent aggregation to some extend and allows high Of of dyes. The Of values of PTE, PDI and DiPhAPDI were all higher than 93.0% in solution and 84.8%, 94.3% and 73.6%, respectively in PS:dye fibers. Embedding the fibers in PDMS improved the photostabilities of the dyes two folds compared to their solution phases. The prepared dye containing fibers were combined together into a single PDMS film and utilized as a frequency conversion layer on a blue LED. Fabricated samples were found to show high color rendering index (>= 90), adjustable CCT (7500 K-5000 K), and power efficiency values exceeding 2001m/W depending on the used fiber amount in mass.
  • Article
    Citation - WoS: 63
    Citation - Scopus: 65
    Amidoxime Functionalized Polymers of Intrinsic Microporosity (pim-1) Electrospun Ultrafine Fibers for Rapid Removal of Uranyl Ions From Water
    (Elsevier Ltd., 2019) Satılmış, Bekir; Isık, Tuğba; Demir, Mustafa Muammer; Uyar, Tamer
    The Polymers of Intrinsic Microporosity (PIM-1) is considered as one of the most promising polymer candidates for adsorption applications owing to its high surface area and the ability to tailor the functionality for the targeted species. This study reports a facile method for the preparation of amidoxime functionalized PIM-1 fibrous membrane (AF-PIM-FM) by electrospinning technique and its practical use for the extraction of U(VI) ions from aqueous systems via column sorption under continuous flow. Fibrous membrane form of amidoxime functionalized PIM-1 (AF-PIM-FM) was prepared by electrospinning method owing to its excellent processability in dimethylformamide. Bead-free and uniform fibers were obtained as confirmed by SEM imaging and average fiber diameter was 1.69 +/- 0.34 mu m for AF-PIM-FM. In addition, electrospun PIM-1 fibrous membrane (PIM-FM) was prepared as a control group. Structural and thermal characterization of powder and membrane forms of the materials were performed using FT-IR, H-1 NMR, XPS, Elemental analyses, TGA, and DSC. The porosity of the samples was measured by N-2 sorption isotherms confirming amidoxime PIM-1 still maintain their porosity after functionalization. Amidoxime functionality along with membrane structure makes AF-PIM-FM a promising material for uranyl adsorption. First, a comparison between powder and membrane form of amidoxime functionalized PIM-1 was investigated using batch adsorption process. Although membrane form has shown slightly lower adsorption performance in the batch adsorption process, the advantage of using the membrane in column adsorption processes makes membrane form more feasible for real applications. In addition, amidoxime modification enhanced the uranium adsorption ability of PIM-FM up to 20 times. The effect of initial concentration and pH were investigated along with regeneration of the adsorbents. AF-PIM-FM was successfully used for five adsorption-desorption cycles without having any damage on the fibrous structure.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 5
    Effect of Chain Topology on Plasmonic Properties of Pressure Sensor Films Based on Poly(acrylamide) and Au Nanoparticles
    (Elsevier Ltd., 2019) Topçu, Gökhan; Demir, Mustafa Muammer
    Au nanoparticles have been recognized as a colorimetric sensing element in polymeric systems because clustering shifts the red color of individual particles into saturated blue due to distinct plasmonic variation. The mechanism of pressure sensing is based on the disintegration of the particle clusters into the individual particles in polymers upon application of pressure. Polymers are usually composed of linear chains that provide a viscoelastic medium for their diffusion. Changing topology of polymer chains from linear to crosslinked under fixed pressure makes a clear change in spectral features of the particles probably due to the hindrance of particle diffusion by the crosslinking points. Therefore, the working range of the sensor films can be increased to higher-pressure values. In this work, polyacrylamide/Au nanoparticle films were prepared by various concentrations of formaldehyde as a crosslinking agent from 0.5 to 5.0 wt %. The initial absorption signal gradually shifts from 690 to 545 nm for linear chains upon application of pressure while shifting goes down to 571 nm for crosslinked ones. The colorimetric change is also examined under humid environments. Contrary to the crosslinking process, humid environment facilitates the diffusion of particles since the chains swell with water molecules that provide a convenient medium for particle diffusion.
  • Article
    Citation - WoS: 21
    Citation - Scopus: 28
    Non-Iridescent Structural Colors From Uniform-Sized Sio2 Colloids
    (Elsevier Ltd., 2018) Topçu, Gökhan; Güner, Tuğrul; Demir, Mustafa Muammer
    Structural colors have recently attracted interest from diverse fields of research due to their ease of fabrication and eco-friendliness. These types of colors are, in principle, achieved by periodically arranged submicron-diameter colloidal particles. The interaction of light with a structure containing long-range ordered colloidal particles leads to coloration; this usually varies depending on the angle of observation (iridescence). However, the majority of the applications demand constant color that is independent of the viewing angle (non-iridescence). In this work, silica colloids were obtained using the Stöber method at different sizes from 150 to 300 nm in an alcoholic dispersion. The casting of the dispersion on a substrate leaves behind a photonic crystal showing a colorful iridescent film. However, centrifugation and redispersion of the SiO2 particles into fresh solvent may cause the formation of small, aggregated silica domains in the new dispersion. The casting of this dispersion allows for the development of photonic glass, presumably due to the accumulation of aggregates showing stable colloidal film independent of viewing angle. Moreover, depending on the size of the silica colloids, non-iridescent photonic glasses with various colors (violet, blue, green, and orange) are obtained.
  • Article
    Citation - WoS: 40
    Citation - Scopus: 44
    Geological and Hydrogeochemical Properties of Geothermal Systems in the Southeastern Region of Turkey
    (Elsevier Ltd., 2019) Baba, Alper; Şaroğlu, Fuat; Akkuş, I.; Özel, Nedret; Yeşilnacar, Mehmet İrfan; Nalbantçılar, Mahmut Tahir; Demir, Mustafa Muammer; Gökçen, Gülden; Arslan, Ş.; Dursun, N.; Uzelli, Taygun; Yazdani, Hamidreza
    The Anatolia region is one of the most seismically active regions in the world. It has a considerably high level of geothermal energy potential thanks to its geological and tectonic settings. The Southeastern Anatolia Region (GAP) is located in the south of Bitlis-Zagros Suture Zone (BZSZ) which is in the Arabian foreland. During the neotectonic period, the folded structures have been developed under the influence of tectonic compression from the Upper Miocene in the GAP Region where it is closely related to active tectonics. These tectonic activities produce more geothermal resources. Few studies have been carried out in this region for geothermal energy. Limited portions of the geothermal resources have been used both for thermal tourism and greenhouses in the GAP region. The aim of this study is to determine geological, tectonic and hydrogeochemical properties of a geothermal system in the GAP Region. The result indicates that the surface temperatures of geothermal fluids are from 20 to 84.5 °C A large number of abandoned oil wells, whose temperature reaches 140 °C, are found in the region. Also, hydrogeochemical results show that deep circulated geothermal fluids are enriched with Na-Cl and shallow geothermal system fluids have Na−HCO 3 and Ca-SO 4 characters because of cold water mixing and water-rock interaction. Cold waters are generally of Ca-Mg−HCO 3 and Ca−HCO 3 type. Cation geothermometers were used for determining reservoir temperature of the geothermal resources in the region. The results show that the reservoir temperature of these geothermal resources ranges from 50 °C to 200 °C. The isotope data (oxygen-18, deuterium and tritium) suggests that geothermal fluid is formed by local recharge and deep circulation.
  • Article
    Citation - WoS: 13
    Citation - Scopus: 16
    The Injection of Co2 To Hypersaline Geothermal Brine: a Case Study for Tuzla Region
    (Elsevier Ltd., 2019) Topçu, Gökhan; Koç, Gonca A.; Baba, Alper; Demir, Mustafa Muammer
    Scaling is a serious issue for geothermal power plants since it remarkably decreases the harvesting of energy. The reduction of pH by organic acids whose structure is close to CO2 for instance formic acid has been an effective solution for the minimization of scaling. Herein, the effect of CO2 injection on the formation of scaling particularly metal-silicates was investigated for the model case of Tuzla Geothermal Field (TGF) located in the northwest of Turkey. CO2 has an acidic character in aqueous systems because it leads to the formation of carbonic acid. The injection of 20.6 m3/s CO2 (approximately 88 ppm) to hypersaline brine of TGF is a promising green approach for both mitigation of scaling by reducing pH from 7.2 to 6.2 at the well-head and the minimization of potential corrosion compared to the use of formic acid (55 ppm).
  • Article
    Citation - WoS: 21
    Citation - Scopus: 27
    Increasing Solubility of Metal Silicates by Mixed Polymeric Antiscalants
    (Elsevier Ltd., 2019) Topçu, Gökhan; Çelik, Aslı; Kandemir, Ali; Baba, Alper; Şahin, Hasan; Demir, Mustafa Muammer
    The increase of silicate solubility is a big challenge for both hot and cold water because it reduces the deposition of metal silicates frequently observed in such systems and causes operational obstacles. The deposition of silicate coats the inner surface of the pipelines in an uncontrolled manner and reduces the harvesting of energy from brines. In this work, the solubility performance of two commercial water-soluble polymeric agents (poly(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA)) of various molecular weights employing dosage from 25 to 100 mg/L was examined. Along with dispersant-type antiscalant, poly(acrylamide) (PAM), poly(vinylsulfonic acid, sodium salt) (PVSA), and poly(vinylphosphonic acid) (PVPA) having chelating acidic groups were employed. Metal silicate deposits were obtained artificially in the lab-scale pressurized reactor. The experimental conditions employed were quite similar to a model power plant located in Çanakkale, Turkey. The concentration of dissolved silica was increased from 130 to 420 mg/L when 100 mg/L PEG 1500 and 25 mg/L PVSA were employed as a mixture. For the atomic-level understanding of the interaction of chelating groups with metal cations, DFT calculations were performed too.