WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
6 results
Search Results
Article Citation - WoS: 9Citation - Scopus: 7Understanding the Impact of Sri2 Additive on the Properties of Sn-Based Halide Perovskites(Elsevier, 2022) Yüce, Hürriyet; Perini, Carlo A. R.; Hidalgo, Juanita; Castro-Mendez, Andres-Felipe; Evans, Caria; Demir, Mustafa MuammerOrganic-inorganic halide perovskites have been identified as favorable candidates for the next generation of photovoltaics. Adding alkali metal halides to perovskite films has been shown to be a viable option to improve the perovskite film quality and to modulate their fundamental properties. In this work, we perform optical and electron-beam based characterizations of mixed Sn/Pb based perovskite films to investigate the effect of the addition of the alkaline metal halide SrI2. By analyzing structural (X-ray diffraction), morphological (Scanning Electron Microscopy), optical (photoluminescence), and chemical properties (X-ray photoelectron spectroscopy), we show a complex interplay of effects upon addition of Sr2+ into the perovskite solution. Low concentrations of Sr2+ increases lattice strain, which hints at incorporation of the additive into the perovskite lattice and improves the film optoelectronic properties. As the additive concentration increases beyond 0.5 mol %, microstrain decreases. At concentrations >0.5 mol %, Sr2+ induces significant reduction of the average domain size, which impacts both structural and optical properties of the perovskite film.Article Citation - WoS: 61Citation - Scopus: 64Electrospun Gelma Fibers and P(hema) Matrix Composite for Corneal Tissue Engineering(Elsevier Ltd., 2021) Arıca, Tuğçe A.; Güzelgülgen, Meltem; Yıldız, Ahu Arslan; Demir, Mustafa MuammerThe development of biocompatible and transparent three-dimensional materials is desirable for corneal tissue engineering. Inspired from the cornea structure, gelatin methacryloyl-poly(2-hydroxymethyl methacrylate) (GelMA-p(HEMA)) composite hydrogel was fabricated. GelMA fibers were produced via electrospinning and covered with a thin layer of p(HEMA) in the presence of N,N?-methylenebisacrylamide (MBA) as cross-linker by drop-casting. The structure of resulting GelMA-p(HEMA) composite was characterized by spectrophotometry, microscopy, and swelling studies. Biocompatibility and biological properties of the both p(HEMA) and GelMA-p(HEMA) composite have been investigated by 3D cell culture, red blood cell hemolysis, and protein adsorption studies (i.e., human serum albumin, human immunoglobulin and egg white lysozyme). The optical transmittance of the GelMA-p(HEMA) composite was found to be approximately 70% at 550 nm. The GelMA-p(HEMA) composite was biocompatible with tear fluid proteins and convenient for cell adhesion and growth. Thus, as prepared hydrogel composite may find extensive applications in future for the development of corneal tissue engineering as well as preparation of stroma of the corneal material. © 2020 Elsevier B.V.Book Part Citation - WoS: 2Scaling Problem of the Geothermal System in Turkey(Taylor and Francis Ltd., 2014) Doğan, Irmak; Demir, Mustafa Muammer; Baba, Alper[No abstract available]Article Citation - WoS: 24Citation - Scopus: 29Hydrophobic Coatings From Photochemically Prepared Hydrophilic Polymethacrylates Via Electrospraying(John Wiley and Sons Inc., 2017) Işık, Tuğba; Demir, Mustafa Muammer; Aydoğan, Cansu; Çiftçi, Mustafa; Yağcı, YusufLinear poly(hydroxyethyl methacrylate-co-methyl methacrylate) P(HEMA-co-MMA) and poly(dimehylaminoethyl methacrylate-co-methyl methacrylate) P(DMAEMA-co-MMA) and their corresponding hyperbranched copolymers were synthesized by conventional photoinitiated free radical polymerization and self-condensing vinyl polymerization (SCVP) using Type I and Type II photoinitiators, respectively. Then, the polymers were processed by electrospraying in N, N-dimethylformamide. The surface of the resulting electrospray coatings was examined by SEM, XPS, and WCA then compared with those prepared by drop casting. Regardless of the structural nature of the polymers, electrospraying allows the preparation of rough surface that shows more hydrophobic behavior. Electrospray coatings with linear and hyperbranched copolymers exhibited WCA as ∼150° and ∼130°, respectively, indicating that branching reduces the WCA.Article Citation - WoS: 83Precipitation of Monodisperse Zno Nanocrystals Via Acid-Catalyzed Esterification of Zinc Acetate(Royal Society of Chemistry, 2006) Demir, Mustafa Muammer; Muñozz-Espí, Rafael; Lieberwirth, Ingo; Wegner, GerhardA wet-chemical method to produce zinc oxide nanocrystals of monodisperse size distribution (diameter range of 20-80 nm) is presented. The synthesis starts from zinc acetate dihydrate which is converted to ZnO in the presence of 1-pentanol in m-xylene at 130 °C. We report for the first time catalysis of this reaction by p-toluene sulfonic acid monohydrate (p-TSA), which allows a shorter reaction time and improves both the reproducibility of the particle size distribution and the crystallinity of the particles. The reaction can be scaled up to give multigram quantities of product per batch. Particles were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and photoluminesence (PL) spectroscopy. Room temperature PL spectra of ZnO prepared without catalyst exhibit a strong and sharp UV emission band at ca. 385 nm and a weak and very broad green-yellow visible emission centered at ca. 550-560 nm. However, for nanoparticles precipitated in the presence of p-TSA, the UV emission is enhanced by a factor of 4, which can be correlated with the improvement of crystal perfection. A particle formation mechanism is discussed.Article Citation - WoS: 11Citation - Scopus: 11Effect of Alkali Metal Hydroxides on the Morphological Development and Optical Properties of Ceria Nanocubes Under Hydrothermal Conditions(American Scientific Publishers, 2011) Kepenekçi, Özlem; Eanes, Mehtap; Demir, Mustafa MustafaNanocrystalline cerium(IV) oxide (CeO2, ceriaceria) particles were produced via the hydrothermal treatment of cerium nitrate hexahydrate with various alkali metal hydroxides (MOH: M = Li, Na, K). Experimental conditions such as [MOH], reaction temperature, and reaction time were studied. Particle morphology as well as size of crystallites was precisely controlled by choice of experimental conditions. While rod-shaped particles were obtained at 120 C, well-defined nanocubes were formed at higher temperatures regardless of the choice of MOH. Examination of particle growth kinetics, in the final stages of crystallization, showed that particle growth rate is controlled by two different mechanisms. Grain boundary diffusion controls the particle growth in the presence of NaOH with an activation energy of 113.8 kj/mol and surface diffusion for LiOH ad KOH with the activation energy of 43.0–150.9 kj/mol, respectively. In addition, the particles exhibit strong violet and blue emissions at 400 nm and 370 nm. The former emission originates from excitation of a wide band gap of CeO2. The latter one is attributed to the trivalency of the cerium ion and appears to be sensitive to all the experimental conditions studied. Both extending reaction time and increasing temperature reduce the intensity of the 370 nm emission and increase the intensity of the 400 nm emission.