WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
40 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 4Effects of Alkaline Earth Metal Additives on Methylammonium-Free Lead Halide Perovskite Thin Films and Solar Cells(Wiley, 2022) Yüce, Hürriyet; LaFollette, Diana K.; Demir, Mustafa Muammer; Perini, Carlo A.R.; Correa-Baena, Juan-PabloOrganic–inorganic lead halide perovskite solar cells are regarded as one of the most promising technologies for the next generation of photovoltaics due to their high power conversion efficiency (PCE) and simple solution manufacturing. Among the different compositions, the formamidinium lead iodide (FAPbI3) photoactive phase has a bandgap of 1.4 eV, which enables the corresponding higher PCEs according to the Shockley–Queisser limit. However, the photoactive crystal phase of FAPbI3 is not stable at room temperature. The most high-performing compositions to date have reduced this problem by incorporating the methylammonium (MA) cation into the FAPbI3 composition, although MA has poor stability at high temperatures and in humid environments, which can limit the lifetime of FAxMA1−xPbI3 films. CsxFA1−xPbI3 perovskites are also explored, but despite better stability they still lag in performance. Herein, the additive engineering of MA-free organic−inorganic lead halide perovskites using divalent cations Sr2+ and Ca2+to enhance the performances of CsxFA1−xPbI3 perovskite compositions is explored. It is revealed that the addition of up to 0.5% of Sr2+ and Ca2+ leads to improvements in morphology and reduction in microstrain. The structural improvements observed correlate with improved solar cell performances at low additive concentrations.Article Citation - WoS: 3Citation - Scopus: 6Hybrid Photonic-Plasmonic Mode-Coupling Induced Enhancement of the Spontaneous Emission Rate of Cds/Cdse Quantum Emitters(Elsevier, 2022) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammern this paper, a hybrid photonic-plasmonic resonator, which comprises an electrospun polymer fiber with a micrometer diameter and a core/shell nanostructure with a gold nanoparticle core, is constructed to investigate the dynamics of the coupled spontaneous emission of CdS/CdSe quantum dots (QDs). The gold nanoparticle core; covered with a silica shell, anchored with individual CdS/CdSe QDs, is placed inside a hollow cylindrical nanocavity formed on the surface of the microfiber to enable integration of the optical mode with the plasmonic effect, which is induced by the localized surface plasmons of the metal nanoparticle being present in the vicinity of the dipoles. The spontaneous emission rate of the QDs, coupled into the hybrid photonic-plasmonic mode, is measured to enhance by a factor of 23 via a time-resolved experimental technique. This result suggests that the regeneration of the optical mode-field inside the photonic-plasmonic resonator through the interaction of the dipoles with the localized surface plasmons of a metal nanoparticle strongly enhances the density of the electromagnetic states of the quantum emitters to facilitate an enhanced spontaneous emission within the host medium of the proposed polymer based-photonic structure.Article Citation - WoS: 7Citation - Scopus: 9Experimental Apparatus for Simultaneous Measurement of Triboelectricity and Triboluminescence(Elsevier Ltd., 2020) Arıca, Tuğçe A.; Topçu, Gökhan; Pala, Atamert; Demir, Mustafa MuammerTriboelectricity is a phenomenon caused by the accumulation of opposite electric charges on the surfaces of two different materials as a result of contact with each other. The phenomenon of emitting cold light when the material is subjected to physical deformation is called triboluminescence. This paper presents an experimental apparatus that allows simultaneous measurement of both triboelectricity and triboluminescence of a model composite system based on poly (vinylidene fluoride) (PVDF) and europium tetrakis (dibenzoylmethide) triethylammonium (EuD(4)TEA). While the former component was studied in contact-separation mode giving triboelectricity, the latter emits triboluminescence upon application of mechanical impact. The device was operated at varying range of frequencies from 0.5 to 4.8 Hz and the force in the range of 5.4-9.5 N. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 36Citation - Scopus: 39Recent Developments of Colorimetric Mechanical Sensors Based on Polymer Composites(Royal Society of Chemistry, 2020) İnci, Ezgi; Topçu, Gökhan; Güner, Tuğrul; Demirkurt, Merve; Demir, Mustafa MuammerColorimetric mechanical (force, pressure, strain, and impact) sensors allow naked-eye visualization of existing structural deformations of a system occurring upon application of a mechanical action. The combination of mechanochromic materials with polymers offers a practical approach to designing and fabricating these sensors. Polymers as matrices can tolerate a wide range of forces and permits reusability of the sensors. On the other hand, mechanochromic materials provide unique colour properties depending on the type of mechanical action. They have also been frequently employed for the quantification of mechanical forces. As an example, non-centrosymmetric crystals are combined with polymers for sensing impact forces. Structures with photoluminescence and scattering and plasmonic resonances can be used to fabricate strain and pressure responsive composite materials, respectively. This study reviews recent advances in colorimetric mechanical sensor systems prepared using polymers and inorganic and organic mechanochromic materials working under a wide range of forces.Article Citation - WoS: 50Citation - Scopus: 58Chemically Modified Optical Fibers in Advanced Technology: an Overview(Elsevier, 2019) Shukla, S. K.; Kushwaha, Chandra Shekhar; Güner, Tuğrul; Demir, Mustafa MuammerIn recent years, chemically modified optical fibers have widely used for development of several advanced chemical and biosensors, biomedical technology and environmental monitoring. The chemically modified optical fiber bears several valuable properties like energy loss, catalytic behaviour, refractive index, and mechanical strength to advance the optical fiber technology. In this article, we reviewed the chemically-modified optical fiber and their applications in different optical fiber-based technologies. The basics of optical fiber and their modification are discussed along with the adopted methodologies. The advancements in different optical fiber based technologies viz sensing, imaging, tomography, magnetic resonance imaging, photodynamic therapy, optogenics, surgery and environmental monitoring are discussed in the light of the contribution of chemically modified optical fibers. In conclusion, success and challenges for the use of chemically modified-optical fiber are presented on the basis of existing literature.Article Citation - WoS: 4Citation - Scopus: 4Color-Tunable All-Inorganic Cspbbr3 Perovskites Nanoplatelet Films for Photovoltaic Devices(American Chemical Society, 2019) Özcan, Mehmet; Özen, Sercan; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, HasanHerein, we demonstrate a novel coating approach to fabricate CsPbBr3 perovskite nanoplatelet film with heat-free process via electrospraying from precursor solution. A detailed study is carried out to determine the effect of various parameters such as ligand concentration, electric field, flow rate, etc. on the optical properties. By controlling the volume ratios of the oleylamine (OAm) and oleic acid (OA), the coalescing and thickness of the resulting nanoplatelets can be readily tuned that results in control over emission in the range of 100 nm without any antisolvent crystallization or heating processes. The varying electrical field and flow rate was found as inefficient on the emission characteristics of the films. In addition, the crystal films were obtained under ambient conditions on the ITO coated glass surfaces as in the desired pattern. As a result, we demonstrated a facile and reproducible way of synthesizing and coating of CsPbBr3 perovskite nanoplatelets which is suitable for large-scale production. In this method, the ability of tuning the degree of quantum confinement for perovskite nanoplatelets is promising approach for the one-step fabrication of crystal films that may enable the use in optoelectronics.Article Citation - WoS: 25Citation - Scopus: 28Colorimetric and Plasmonic Pressure Sensors Based on Polyacrylamide/Au Nanoparticles(Elsevier, 2019) Topçu, Gökhan; Güner, Tuğrul; İnci, Ezgi; Demir, Mustafa MuammerColorimetric stimuli-responsive nanomaterials have emerged as an eminent tool for sensor applications. Among this class of sensing elements, gold nanoparticle-based (Au NP) nanostructures are promising materials due to their plasmonic features. In this study, free-standing flexible polymeric films having intense optical response upon application of mechanical pressure were fabricated based on polyacrylamide (PAAm) and Au NPs. Pressure may cause plasmonic shift most probably due to the disassembly of the clusters from blue to reddish individual particles depending on the extent of pressure. Temperature, time, and extent of pressure were examined in terms of spectral change of Au particles. The sensor films depict working range up to 160 MPa, which shows minor change at elevated temperatures probably due to the stress induced crystallization of PAAm. For practical applications, a simple red-green-blue (RGB) space-based algorithm was presented for smartphone-assisted detection of applied pressure. Moreover, the PAAm/Au composite structure shows self-healing without any additive under ambient conditions even after divided into pieces. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 4Citation - Scopus: 4Triboluminescent Composite Microspheres Consisting of Alginate and Eud(4)tea Crystals(Elsevier, 2018) İncel, Anıl; Demir, Mustafa MuammerAlginate is utilized to obtain luminescent composite microspheres containing europium tetrakis (dibenzoylmethide) triethylammonium (EuD4TEA) triboluminescent (TL) crystals. Na alginate is initially treated with Ca(II) and then Eu (III) so that physically-crosslinked alginate microspheres were obtained. EuD4TEA crystals are precipitated in situ on the surface of the spheres upon treatment with dibenzoylmethane (DBM) and triethylamine (TEA). The EuD4TEA/alginate composite spheres are swollen in aqueous system, the diameter of the microspheres increases from 180 up to 405 pm in 48 h. TL intensity of the spheres swollen in 1 h decreases 4 folds compared to dry spheres; however, it systematically increases as the swelling time is extended step-wise to 48 h. Swelling may develop structural homogenity in the microsphere that supresses the optical scattering and may lead to better transmittance of the TL signal. (C) 2017 Elsevier B.V. All rights reserved.Article Citation - WoS: 39Citation - Scopus: 43Tailored Electrospun Fibers From Waste Polystyrene for High Oil Adsorption(Elsevier Ltd., 2018) Isık, Tuğba; Demir, Mustafa MuammerRecent ship accidents that resulted catastrophic oil spills necessitate producing environmentally friendly, costeffective, and large-scale fabrication technology for oil-sorbent materials. Various material systems have been employed to fabricate sorbent materials; however, using fresh material components as adsorbent can lead to a secondary pollution. Therefore, recycling of plastics wastes for the fabrication of adsorbent material could be a wise approach to handle this environmental issue. In this study, foam-expanded polystyrene (f-PS), a commodity polymer used for insulation and packing materials, was electrospun from solution mixture of THF and DMF. Surface and interior porosity were achieved from individual fibers electrospun froma composition of DMF: THF (1:3) at 20-wt% of solid f-PS content. The resulting adsorbents exhibited a considerable hydrophobicity (WCA approximate to 120 degrees) and oleophilicity (CA approximate to 10 degrees), which can selectively adsorb both vegetable and engine oils from polluted waters. The porosity of the fibers has significant effect on the sorption capacity and separation efficiency up to 124 g/g and 99%, respectively. Thus, electrospun mats of the polystyrene wastes offer a promising adsorbent for the remediation of oily wastewaters. (C) 2018 Published by Elsevier B.V.Article Citation - WoS: 18Citation - Scopus: 46Phosphor-Based White Led by Various Glassy Particles:control Over Luminous Efficiency(The Optical Society, 2019) Yüce, Hürriyet; Güner, Tuğrul; Balcı, Sinan; Demir, Mustafa MuammerGenerating white light through a mainstream remote phosphor design suffers from phosphor conversion efficiency loss due to a backscattering of light. Such a loss also reduces luminous efficiency of the resulting white light. To overcome this issue, various glassy scatterers with different morphologies such as glass bubbles, glass beads, and nanosized silica particles were employed as scatterers, together with a fixed amount of yellow phosphor (YAG:Ce3+) and a poly(dimethylsiloxane) (PDMS) matrix. In addition, the simulation of the system validates the rigorous multiple scattering of the incoming light most probably due to refractive index mismatch between the glass bubbles and surrounding PDMS matrix along with the internal reflections. (C) 2019 Optical Society of America