WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
4 results
Search Results
Article Citation - WoS: 32Citation - Scopus: 33Variation of Structural and Optical Properties of Tio2 Films Prepared by Dc Magnetron Sputtering Method With Annealing Temperature(Elsevier Ltd., 2020) Gürakar, Sibel; Ot, Hakan; Horzum, Şeyda; Serin, TülayTiO2 thin films are deposited by direct current magnetron sputtering method on the silicon and quartz substrates. The effect of annealing temperature on the film properties are analysed by using X-ray diffraction (XRD), Raman scattering, atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical spectroscopy measurements. Raman and XRD results reveal that the crystal structure of the TiO2 film is strongly affected by the annealing temperature. The crystal structure of the coated film is changed from amorphous to anatase structure after annealing at 500 degrees C. Anatase and rutile phases of TiO2 start to coexist after annealing at 800 degrees C. Rutile phases of TiO2 become dominant for film annealed at 900 degrees C. SEM and AFM images uncover that the morphology, grain size and surface roughness of TiO2 films vary with the annealing temperature. The optical band gap decreases from 3.35 to 2.90 eV as the phase transforms from amorphous to rutile.Article Citation - WoS: 42Citation - Scopus: 42Investigation of Humidity Sensing Properties of Zns Nanowires Synthesized by Vapor Liquid Solid (vls) Technique(Elsevier Ltd., 2011) Üzar, Neslihan; Okur, Salih; Arıkan, M. ÇetinZinc sulfide (ZnS) nanostructures were synthesized by vapor-liquid-solid (VLS) method which is based on thermal evaporation. The morphology, chemical composition and crystal structure of ZnS nanostructures were characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) analyses. The results of these studies revealed that wurtzite ZnS nanowires with diameters in range of 50-400 nm are obtained. In order to investigate the humidity sensing capability, quartz crystal microbalance (QCM) and electrical resistance measurement techniques were carried out at different relative humidity (RH) conditions between 33% and 100% RH at room temperature. QCM results show that the oscillating frequency of ZnS nanowires loaded on QCM crystal decreases in range of 33-84% RH, but increases at 90% and 100% RH. The sensitivity of ZnS nanowires-based sensor (R air/RRH) increases over 1000 times from 33% to 100% RH. These experimental results show that ZnS nanowires have a great potential for humidity sensing applications at room temperature.Article Citation - WoS: 31Citation - Scopus: 40Structural and Magnetic Characterization of Plasma Ion Nitrided Layer on 316l Stainless Steel Alloy(Elsevier Ltd., 2009) Öztürk, Orhan; Okur, Salih; Riviere, Jean PaulIn this study, an FeCrNi alloy (316L stainless steel disc) was nitrided in a low-pressure R.F. plasma at 430 °C for 72 min under a gas mixture of 60% N2-40% H2. Structural, compositional and magnetic properties of the plasma nitrided layer was investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and magnetic force microscopy (MFM). The magnetic behaviour of the nitrided layer was also investigated with a vibrating sample magnetometer (VSM). Combined X-ray diffraction, cross-sectional SEM, AFM and MFM, as well as VSM analyses provide strong evidence for the formation of the γN phase, [γN-(Fe, Cr, Ni)], with mainly ferromagnetic characteristics. The uniform nature of the γN layer is clearly demonstrated by the XRD, cross-sectional SEM and AFM analyses. Based on the AFM and SEM data, the thickness of the γN layer is found to be ∼6 μm. According to the MFM and VSM analyses, ferromagnetism in the γN layer is revealed by the observation of stripe domain structures and the hysteresis loops. The cross-sectional MFM results demonstrate the ferromagnetic γN phase distributed across the plasma nitrided layer. The MFM images show variation in the size and form of the magnetic domains from one grain to another.Article Citation - WoS: 18Citation - Scopus: 22Microstructural and Mechanical Characterization of Nitrogen Ion Implanted Layer on 316l Stainless Steel(Elsevier Ltd., 2009) Öztürk, OrhanNitrogen ion implantation can be used to improve surface mechanical properties (hardness, wear, friction) of stainless steels by modifying the near-surface layers of these materials. In this study, a medical grade FeCrNi alloy (316L stainless steel plate) was implanted with 85 keV nitrogen ions to a high fluence of 1 × 1018N2+ / cm2 at a substrate temperature <200 °C in an industrial implantation facility. The N implanted layer microstructures, thicknesses and strengths were studied by a combination of X-ray diffraction (XRD), conversion electron Mössbauer spectroscopy (CEMS), atomic force microscopy (AFM) and nanohardness measurements. AFM was also used for the surface roughness analysis of the implanted as well as polished materials. The CEMS analysis indicate that the N implanted layer is ∼200 nm thick and is composed of ε-(Fe,Cr,Ni)2+xN-like nitride phase with mainly paramagnetic characteristics. The nanohardness measurements clearly indicate an enhanced hardness behaviour for the N implanted layer. It is found that the implanted layer hardness is increased by a factor of 1.5 in comparison to that of the substrate material. The increased hardness resulting from nitrogen implantation is attributed to the formation of ε nitride phase.