WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
168 results
Search Results
Article Citation - WoS: 38Citation - Scopus: 50Multi-Zone Optimisation of High-Rise Buildings Using Artificial Intelligence for Sustainable Metropolises. Part 1: Background, Methodology, Setup, and Machine Learning Results(Elsevier Ltd., 2021) Ekici, Berk; Kazanasmaz, Zehra Tuğçe; Turrin, Michela; Taşgetiren, M. Fatih; Sarıyıldız, I. SevilDesigning high-rise buildings is one of the complex tasks of architecture because it involves interdisciplinary performance aspects in the conceptual phase. The necessity for sustainable high-rise buildings has increased owing to the demand for metropolises based on population growth and urbanisation trends. Although artificial intelligence (AI) techniques support swift decision-making when addressing multiple performance aspects related to sustainable buildings, previous studies only examined single floors because modelling and optimising the entire building requires extensive computational time. However, different floor levels require various design decisions because of the performance variances between the ground and sky levels of high-rises in dense urban districts. This paper presents a multi-zone optimisation (MUZO) methodology to support decision-making for an entire high-rise building considering multiple floor levels and performance aspects. The proposed methodology includes parametric modelling and simulations of high-rise buildings, as well as machine learning and optimisation as AI methods. The specific setup focuses on the quad-grid and diagrid shading devices using two daylight metrics of LEED: spatial daylight autonomy and annual sunlight exposure. The parametric model generated samples to develop surrogate models using an artificial neural network. The results of 40 surrogate models indicated that the machine learning part of the MUZO methodology can report very high prediction accuracies for 31 models and high accuracies for six quad-grid and three diagrid models. The findings indicate that the MUZO can be an important part of designing high-rises in metropolises while predicting multiple performance aspects related to sustainable buildings during the conceptual design phase. © 2021 The Author(s)Article Citation - WoS: 14Supercritical Ethanol Drying of Zinc Borates of 2zno Center Dot 3b(2)o(3)center Dot 3h(2)o and Zno Center Dot B2o3 Center Dot 2h(2)o(Elsevier Ltd., 2011) Gönen, Mehmet; Balköse, Devrim; Ülkü, SemraSupercritical ethanol (SCE) drying of zinc borates was investigated to obtain dry zinc borate nanoparticles and to elucidate possible chemical interactions between zinc borates and ethanol. Commercial and synthesized 2ZnO center dot 3B(2)O(3)center dot 3H(2)O and ZnO center dot B2O3 center dot 2H(2)O samples were dried by both conventional and SCE drying methods and the products were compared. Zinc borates were characterized using X-ray powder diffraction (XRD), thermo gravimetric analysis (TGA), Fourier transform infrared (FTIR) analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and helium pycnometer. Zn and B contents of samples were also determined by analytical titration. It was found that zinc borate of ZnO center dot B2O3 center dot 2H(2)O decomposed completely into zinc oxide and boric acid. However, zinc borate having oxide formula of 2ZnO center dot 3B(2)O(3)center dot 3H(2)O decomposed partially to form anhydrous zinc borate, zinc oxide, water and boric acid during the SCE drying carried out at 250 degrees C and 6.5 MPa. Boric acid and water were extracted from both of zinc borates by supercritical ethanol. The extraction of boric acid by ethanol in the SCE drying of zinc borates is an important result which can be utilized in the production of boric acid from water insoluble natural minerals, e.g. colemanite. The boric acid-ethanol solution could be directly utilized in the synthesis of ethyl borate. (C) 2011 Elsevier B.V. All rights reserved.Article Citation - WoS: 32Citation - Scopus: 33Variation of Structural and Optical Properties of Tio2 Films Prepared by Dc Magnetron Sputtering Method With Annealing Temperature(Elsevier Ltd., 2020) Gürakar, Sibel; Ot, Hakan; Horzum, Şeyda; Serin, TülayTiO2 thin films are deposited by direct current magnetron sputtering method on the silicon and quartz substrates. The effect of annealing temperature on the film properties are analysed by using X-ray diffraction (XRD), Raman scattering, atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical spectroscopy measurements. Raman and XRD results reveal that the crystal structure of the TiO2 film is strongly affected by the annealing temperature. The crystal structure of the coated film is changed from amorphous to anatase structure after annealing at 500 degrees C. Anatase and rutile phases of TiO2 start to coexist after annealing at 800 degrees C. Rutile phases of TiO2 become dominant for film annealed at 900 degrees C. SEM and AFM images uncover that the morphology, grain size and surface roughness of TiO2 films vary with the annealing temperature. The optical band gap decreases from 3.35 to 2.90 eV as the phase transforms from amorphous to rutile.Article Citation - WoS: 8Citation - Scopus: 8Study of Boron Doped Amorphous Silicon Lightly Hydrogenated Prepared by Dc Magnetron Sputtering for Infrared Detectors Applications(Elsevier Ltd., 2020) Ketroussi, K.; Cherfi, R.; Yahia, Seba, H.; Tata, S.; Chabane, L.; Özyüzer, Lütfi; Rahal, A.The objective of this study is to investigate the effect of boron doping concentration on the bolometric properties of lightly hydrogenated amorphous silicon doped with boron (a-Si: H(B)) films. Thin film a-Si: H(B) samples with different boron concentrations are prepared by co-sputtering of boron and silicon at relatively low hydrogen pressure. FTIR analyses show that the intensity of the characteristic peak of the substitutional boron gradually increases with the addition of boron. Increasing in boron concentration affects the bolometric properties of the lightly hydrogenated a-Si: H (B) films, including conductivity at room temperature (?RT) and thermal resistance coefficient (TCR). Indeed, when the boron concentration increases from 1.5 to 43%, ?RT increases from 1.4 10?6 to 2 10?3 ??1 cm?1 while the absolute value of TCR decreases from 3% to 8% K?1, respectively. In addition, lightly hydrogenated a-Si: H (B) films exhibit good thermal stability. We have showed in this study that lightly hydrogenated a-Si: H(B) can be considered as a potential candidate for low-cost, high-performance uncooled micro bolometers. © 2020 Elsevier B.V.Article Citation - WoS: 14Citation - Scopus: 17Spectrophotometric Characterization of Plasticizer Migration in Poly(vinyl Chloride)-Based Artificial Leather(Elsevier Ltd., 2021) Akkuş Altındağ, İffet; Akdoğan, YaşarPlasticized polyvinyl chloride (PVC) is one of the most commonly used material in the manufacture of artificial leather because of its flexibility, high durability and low cost. While hundreds of plasticizers have been produced to obtain PVC films and artificial leathers, it is important to choose the correct plasticizer to produce the desired products. Therefore, here five non-phthalate type plasticizers with three levels (40 phr, 60 phr and 80 phr); trioctyl trimelliate (TOTM), tributyl trimelliate (TBTM), dioctyl terephthalate (DOTP), dioctyl adipate (DOA) and dioctyl succinate (BIO) were used to prepare plasticized PVC films. They were studied in terms of their compabilities with PVC polymer chains, and their effects on mechanical properties of PVC films. Although, linear plasticizers e.g. BIO and DOA have higher compabilities with PVC, a branched plasticizer e.g. TOTM showed higher mechanical properties. Moreover, a new spectrophotometric method for determination of plasticizer migration from PVC polymer matrix to the surface of artifical leather was developed. According to lightness change on the surface of PVC artifical leather before and after heat treatment at 70 °C, the migration rates of used plasticizers increase in this order: TOTM < TBTM < DOTP < BIO < DOA. © 2020 Elsevier B.V.Conference Object The Cytoprotective Effects of Zinc on Cyclophosphamide Induced Hematoxicity(Elsevier Ltd., 2007) Ayhancı, Adnan; Doğan, Sevgi Zeynep; Appak, Sıla; Doğan, Sevgi[No abstract available]Article Citation - WoS: 56Citation - Scopus: 63Processing, Characterization and Photocatalytic Properties of Cu Doped Tio2 Thin Films on Glass Substrate by Sol-Gel Technique(Elsevier Ltd., 2006) Çelik, Erdal; Gökçen, Z.; Azem, N. Funda Ak; Tanoğlu, Metin; Emrullahoğlu, O. F.The present paper describes processing, properties and photocatalytic application of Cu doped TiO2 thin films on glass substrate. Cu doped TiO2 coatings were successfully prepared on glass slide substrates using sol-gel method. The obtained solutions exhibit acidic characteristics. The phase structure, thermal, microstructure and surface properties of the coatings were characterized by using XRD, DTA/TG, SEM and AFM. Their adhesion properties and spectroscopic analysis were investigated by a scratch tester and UV-vis spectroscopy. Four different solutions were prepared by changing Cu/Ti ratios. Glass substrates were coated by solutions of Ti-alkoxide, Cu-chloride, glacial acetic acid and isopropanol. The obtained gel films were dried at 300 degrees C for 10 min and subsequently heat-treated at 500 degrees C for 5 min in air. The oxide thin films were annealed at 600 degrees C for 60min in air. TiO2, CuO, Cu4Ti, Ti3O5 and Cu3TiO4 phases were found in the coating. The organic matters were burned at temperatures between 200 and 350 degrees C and TiO2 crystallization was formed at 450 degrees C. The weight loss of the powder during process up to 600 degrees C is approximately 70%. The microstructural observations demonstrated that CuO content was led an improved surface morphology while thickness of the film and surface defects were increased in accordance with number of dipping. According to AFM results, it was found that as the Cu/Ti content increases the surface roughness of the films increases. In addition structural, thermal and microstructural results, it was found that the films of 0.73 ratio have better adhesion strength to the glass substrate among other coatings. The oxide films were found to be active for photocatalytic decomposition of metylene blue. (c) 2006 Published by Elsevier B.V.Article Citation - WoS: 28Citation - Scopus: 29Oxidation of Nanocrystalline Aluminum by Variable Charge Molecular Dynamics(Elsevier Ltd., 2010) Perron, A.; Garruchet, S.; Politano, O.; Aral, Gürcan; Vignal, V.We investigate the oxidation of nanocrystalline aluminum surfaces using molecular dynamics (MD) simulations with the variable charge model that allows charge dynamically transfer among atoms. The interaction potential between atoms is described by the electrostatic plus (Es+) potential model, which is composed of an embedded atom method potential and an electrostatic term. The simulations were performed from 300 to 750 K on polycrystalline samples with a mean grain size of 5 nanometers. We mainly focused on the effect of the temperature parameter on the oxidation kinetic. The results show that, beyond a first linear regime, the kinetics follows a direct logarithmic law (governed by diffusion process) and tends to a limiting value corresponding to a thickness of similar to 3 nm. We also characterized at 600 K the effects of an external applied strain on the microstructure and the chemical composition of oxide films formed at the surface. In particular, we obtained a partially crystalline oxide films for all temperatures and we noticed a strong correlation between the degree of crystallinity of the oxide film and the oxidation temperature. (C) 2009 Elsevier Ltd. All rights reserved.Article Citation - WoS: 23Citation - Scopus: 24Investigation of Kinetics of Supercritical Drying of Alginate Alcogel Particles(Elsevier Ltd., 2019) Şahin, İbrahim; Uzunlar, Erdal; Erkey, CanSpherical calcium alginate gel particles were synthesized by dripping method. The effects of temperature, pressure, particle size and CO2 flow rate on kinetics of supercritical drying of alginate gel particles in a packed bed were investigated. Increase in CO2 flow rate, increase in temperature and decrease in particle size increased the drying rate and decreased the drying time. A mathematical model based on (i) the diffusion of the solvent inside the pores of gel particles, (ii) external mass transfer of the solvent from the surface of the gel particles into the flowing fluid stream, and (iii) convection and axial dispersion of the solvent in the flowing fluid stream was developed. A correlation for predicting external mass transfer coefficients for supercritical drying of alcogel particles was developed by fitting the model to experimental data. A good agreement between the experimental data and model results was achieved using the developed correlation.Article Citation - WoS: 27Citation - Scopus: 31Fluoroacrylate-Aromatic Acrylate Copolymers for Viscosity Enhancement of Carbon Dioxide(Elsevier Ltd., 2019) Kılıç, Sevgi; Enick, Robert M.; Beckman, Eric J.The effect of the structure of aromatic acrylate-fluoroacrylate copolymers on CO2 viscosity at elevated pressures was investigated. These copolymers were all found to be miscible with CO2 at pressures between 10-15 MPa (295 K) and induce an increase in the viscosity to some degree. It appears that stacking of aromatic rings is the key factor in viscosity enhancement. The results showed that viscosity of the solution increases with the increasing content of the aromatic acrylate unit in the copolymer, but a point is reached beyond which additional comonomer causes the relative viscosity to drop, suggesting that the aromatic rings associate through intramolecular rather than intermolecular interactions beyond the optimum value. The most effective CO2 thickener identified in this study was the 29% phenyl acrylate-71% fluoroacrylate copolymer. However, the presence of a spacer (methyl or ethyl) between the backbone and the aromatic group substantially diminished the viscosity enhancement.