WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
16 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 3Light-Induced Synthesis of Single-Crystalline Gold Microplates in an Open System(Amer Chemical Soc, 2023) Akkuş, Betül; Mert Balcı, FadimeBottom-up synthesis of large single-crystalline gold microplates is of key importance to catalysis, nanophotonics, bioengineering, and plasmonics. However, easy, low-cost, room-temperature, and high-yield synthesis of large gold microplates with several micrometers in lateral size and a few tens of nanometers in thickness by using photochemical synthesis in an open system is still challenging. We herein report on an easy and cost-effective photochemical synthesis of single-crystalline gold microplates with lateral sizes up to around 40 mu m and tens of nanometers in thickness in a few hours of reaction time in an open system containing a lyotropic liquid crystal, which is formed by self-assembly of 10-lauryl ether in a strong acid, sulfuric acid, along with water. We have found that by changing the reaction parameters, such as the reaction time, the concentration of gold ions in the liquid crystal, etc., the thickness and size of the microplates can be easily controlled. Most importantly, the liquid crystalline phase is completely preserved after completion of the photochemical reaction. The microplates can be easily isolated and transferred to different media such as alcohol and water for further studies, or they can be immediately used on a substrate after completion of the reaction. The results obtained in this study will allow us to understand the growth mechanism of gold microplates in open systems, and they will find applications in a variety of critical areas, such as plasmonics, nanophotonics, and catalysis.Review Citation - WoS: 13Citation - Scopus: 13Oxygen Delivery Biomaterials in Wound Healing Applications(WILEY-V C H VERLAG GMBH, 2023) Bayraktar, Sema; Üstün, Cansu; Kehr, Nermin SedaOxygen (O2) delivery biomaterials have attracted great interest in the treatment of chronic wounds due to their potential applications in local and continuous O2 generation and delivery, improving cell viability until vascularization occurs, promoting structural growth of new blood vessels, simulating collagen synthesis, killing bacteria and reducing hypoxia-induced tissue damage. Therefore, different types of O2 delivery biomaterials including thin polymer films, fibers, hydrogels, or nanocomposite hydrogels have been developed to provide controlled, sufficient and long-lasting O2 to prevent hypoxia and maintain cell viability until the engineered tissue is vascularized by the host system. These biomaterials are made by various approaches, such as encapsulating O2 releasing molecules into hydrogels, polymer microspheres and 3D printed hydrogel scaffolds and adsorbing O2 carrying reagents into polymer films of fibers. In this article, different O2 generating sources such as solid inorganic peroxides, liquid peroxides, and photosynthetic microalgae, and O2 carrying perfluorocarbons and hemoglobin are presented and the applications of O2 delivery biomaterials in promoting wound healing are discussed. Furthermore, challenges encountered and future perspectives are highlighted. Oxygen delivery (O2) biomaterials have attracted great interest in the treatment of chronic wounds due to their ability to continuously deliver oxygen and support cell viability. Therefore, various O2 generating sources such as solid inorganic peroxides, liquid peroxides and photosynthetic microalgae, and O2-carrying perfluorocarbons and hemoglobin are incorporated into different biomaterial networks for wound healing applications.imageReview Citation - WoS: 6Citation - Scopus: 8Molecular Trojan Horses for Treating Lysosomal Storage Diseases(Academic Press, 2023) Leal, Andres Felipe; Rintz, Estera; Çelik, Betül; Ago, Yasuhiko; León, Daniel; İnci, Orhan Kerim; Seyrantepe, VolkanLysosomal storage diseases (LSDs) are caused by monogenic mutations in genes encoding for proteins related to the lysosomal function. Lysosome plays critical roles in molecule degradation and cell signaling through interplay with many other cell organelles, such as mitochondria, endoplasmic reticulum, and peroxisomes. Even though several strategies (i.e., protein replacement and gene therapy) have been attempted for LSDs with promising results, there are still some challenges when hard-to-treat tissues such as bone (i.e., cartilages, ligaments, meniscus, etc.), the central nervous system (mostly neurons), and the eye (i.e., cornea, retina) are affected. Consistently, searching for novel strategies to reach those tissues remains a priority. Molecular Trojan Horses have been well-recognized as a potential alternative in several pathological scenarios for drug delivery, including LSDs. Even though molecular Trojan Horses refer to genetically engineered proteins to overcome the blood-brain barrier, such strategy can be extended to strategies able to transport and deliver drugs to specific tissues or cells using cell-penetrating peptides, monoclonal antibodies, vesicles, extracellular vesicles, and patient-derived cells. Only some of those platforms have been attempted in LSDs. In this paper, we review the most recent efforts to develop molecular Trojan Horses and discuss how this strategy could be implemented to enhance the current efficacy of strategies such as protein replacement and gene therapy in the context of LSDs. © 2023Article Citation - WoS: 1Citation - Scopus: 1Epoxy Matrix Nano Composites: Modulus, Strength and Ductility Enhancement Through Auxeticity of Α-Cristobalite Filler(Elsevier, 2023) Güden, Mustafa; Ülker, Sevkan; Movahedi, NimaThe negative Poisson's ratio (NPR) nano-size ?-Cristobalite particle/epoxy composites were prepared and tensile tested. The elastic modulus and strength of the composites were improved as the particle volume fraction increased from 0 to 0.02. Unlike the conventional particle reinforced composites, the fracture strain increased with the nano ?-Cristobalite addition, an effect which was ascribed to the intrinsic NPR behavior of the filler. © 2023 Elsevier B.V.Article Citation - WoS: 17Citation - Scopus: 22Protein Corona Formation on Silver Nanoparticles Under Different Conditions(Elsevier, 2022) Tomak, Aysel; Yılancıoğlu, Buket; Winkler, David; Öksel Karakuş, CeydaThe surfaces of nanoparticles become covered by biomolecules in biological fluids. This protein ‘corona’ modifies materials’ characteristics and biological activity. The composition of the protein corona is dynamic, abundant biomolecules that bind first are subsequently replaced by less abundant but more tightly bound ones. Here, we explore the formation of the silver nanoparticle protein corona on exposure to cell culture media containing 10 % fetal bovine serum supplemented Dulbecco's Modified Eagle's medium. Sodium dodecyl-sulfate polyacrylamide gel electrophoresis and liquid chromatography-mass spectrometry/mass spectrometry analysis were used to monitor how different parameters such as incubation time, heating duration, cell culture medium, incubation temperature, and the number of washes affect the nanoparticle–protein corona complex. silver nanoparticles with and without bound proteins were characterized by electron microscopy, dynamic light scattering, and ultraviolet-visible-near-IR spectroscopy. The tetrazolium-based MTT assay was used to determine viability of A549 human lung adenocarcinoma cells treated with silver nanoparticles. Characterization of the nanoparticles before and after protein binding provided insights into their changing morphology on corona formation. Our results confirmed that the physiological environment directly affects protein corona formation on nanoparticle surfaces. In particular, incubation condition-dependent differences in the amount of bound proteins were observed. This work highlights the importance of environmental drivers of protein adsorption, which should be considered when predicting and/or controlling protein targets of silver nanoparticles.Article Effects of Span 60 Template and Freeze Drying on Zinc Borate Produced From Zinc Nitrate Hexahydrate and Borax Decahydrate(Taylor and Francis Ltd., 2022) Alp, Burcu; Gönen, Mehmet; Atakul Savrık, Sevdiye; Balköse, DevrimZinc borate is an important additive to polymers and lubricants. The process variables such as reactant concentration, presence of template in precipitating medium and drying method determine the composition and particle size of zinc borates. In the present study, zinc borate precipitate obtained by mixing aqueous zinc nitrate and borax decahydrate solutions was dried either by conventional method or by freeze drying. The products were well characterized by advanced methods. Zinc borate from 1 mol dm(-3) reactants had (2.1 +/- 0.5)x(2.5 +/- 0.5)x(1.3 +/- 0.2) mu m and (0.5 +/- 0.1)x(1.3 +/- 0.1)x(0.028 +/- 0.01) mu m dimensions by conventional and freeze drying respectively. Individual particles smaller in size is obtained since the particles are not agglomerated due to absence of surface tension of liquid water for case of freeze drying. Planar particles agglomerated into 20 to 60 mu m crystals in the presence of template Span 60 in 1 mol dm(-3) reactants for conventional drying. Nano zinc borate particles with primary particle size of (46 +/- 9) nm were obtained by decreasing the reactant concentration to 0.1 mol dm(-3). The primary particle size was decreased to (40 +/- 3) nm by addition of Span 60 to dilute solutions. However zinc borate nanoparticles obtained from dilute solutions adhered to each other forming agglomerates during conventional drying. Their freeze drying would allow formation of a freely flowing nano powder.Article Citation - WoS: 15Citation - Scopus: 15Enhancement of Heat Transfer in Partially Heated Vertical Channel Under Mixed Convection by Using Al2o3 Nanoparticles(Taylor and Francis Ltd., 2018) Çelik, Hasan; Mobedi, Moghtada; Manca, Oronzio; Buonomo, BernardoLaminar mixed convection in a two-dimensional symmetrically and partially heated vertical channel is investigated. The heaters are located on both walls and uniform temperature is applied on the heated sections. The number of heaters is considered as 1, 4, 8, and 10. Aluminum oxide/water nanofluid is considered as working fluid and the inlet velocity is uniform. The continuity, momentum and energy equations with appropriate boundary conditions are solved in dimensionless form, numerically. The study is performed for Richardson number of 0.01 and 10, Reynolds number of 100 and 500, and nanofluid volume fraction of 0% and 5%. Based on the obtained velocity and temperature distributions, the local and mean Nusselt number is calculated and plotted for different cases. The variation of the mean Nusselt number with the number of the heated portions is also discussed. It is found that the addition of nanoparticles into the base fluid increases mean Nusselt number but the rate of increase depends on Reynolds, Richardson numbers and number of heated portions. It is possible to increase mean Nusselt number 138% by increasing Reynolds number from 100 to 500, Richardson number from 0.01 to 10 and number of heated portions from 1 to 10 when volume fraction value is 5%.Article Citation - WoS: 23Citation - Scopus: 31Nano-Caco3 Synthesis by Jet Flow(Elsevier Ltd., 2017) Ülkeryıldız, Eda; Kılıç, Sevgi; Özdemir, EkremA new methodology was introduced to produce hollow nano calcite particles in homogenous size distribution without aggregation. The design consisted of a jet flow system in which the crystallization region was separated from the stabilization region. The newly produced nano CaCO3 particles of about 140 nm were removed from the crystallization region as quickly as possible into the stabilization region before aggregation or crystal growth. In the stages of crystallization, the particles started to dissolve from their edges which opened-up the pores inside the particles. At the late stages of crystallization, the open pores closed. These particles were stable in Ca(OH)2 solution and no aggregation was detected. Different particles with different morphologies can be produced by adjusting the stages in the crystallization.Article Citation - WoS: 25Citation - Scopus: 23Synthesis and Characterization of Aicar and Dox Conjugated Multifunctional Nanoparticles as a Platform for Synergistic Inhibition of Cancer Cell Growth(American Chemical Society, 2016) Dağlıoğlu, Cenk; Okutucu, BurcuThe success of cancer treatment depends on the response to chemotherapeutic agents. However, malignancies often acquire resistance to drugs if they are used frequently. Combination therapy involving both a chemotherapeutic agent and molecularly targeted therapy may have the ability to retain and enhance therapeutic efficacy. Here, we addressed this issue by examining the efficacy of a novel therapeutic strategy that combines AICAR and DOX within a multifunctional platform. In this context, we reported the bottom-up synthesis of Fe3O4@SiO2(FITC)-FA/AICAR/DOX multifunctional nanoparticles aiming to neutralize survivin (BIRC5) to potentiate the efficacy of DOX against chemoresistance. The structure of nanoparticles was characterized by dynamic light scattering (DLS), zeta-potential measurement, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and electron microscopy (SEM and STEM with EDX) techniques. Cellular uptake and cytotoxicity experiments demonstrated preferentially targeted delivery of nanoparticles and an efficient reduction of cancer cell viability in five different tumor-derived cell lines (A549, HCT-116, HeLa, Jurkat, and MIA PaCa-2). These results indicate that the multifunctional nanoparticle system possesses high inhibitory drug association and sustained cytotoxic effect with good biocompatibility. This novel approach which combines AICAR and DOX within a single platform might be promising as an antitumor treatment for cancer.Article Citation - WoS: 44Citation - Scopus: 44Chitosan-Polyoxometalate Nanocomposites: Synthesis, Characterization and Application as Antimicrobial Agents(Springer Verlag, 2014) Fiorani, Giulia; Saoncella, Omar; Kaner, P.; Alsoy Altınkaya, Sacide; Figoli, Alberto; Bonchio, Marcella; Carraro, MauroPolyoxometalates (POMs) were used, together with chitosan (CS), to obtain hybrid nanoaggregates. Three representative POMs were efficiently assembled into nanoparticles of few hundred nm diameter, featuring entangled ribbons substructure. In order to establish suitable preparation and stability conditions, the assemblies were characterized in solution by UV-Vis spectroscopy, dynamic light scattering and ζ-potential. The nanoparticles were tested against E. coli (106 CFU/ml) in aqueous solution, showing a synergic activity of the heteropolyacid H5PMo10V2O40 and CS. For such components, a highly porous and antibacterial film was obtained upon lyophilisation of the colloidal mixture.