WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
7 results
Search Results
Review Citation - WoS: 21Citation - Scopus: 23A Comprehensive Review of Computational Fluid Dynamics Simulation Studies in Phase Change Materials: Applications, Materials, and Geometries(Springer, 2023) Soodmand, A. Mohammadian; Azimi, B.; Nejatbakhsh, S.; Pourpasha, H.; Farshchi, M. Ebrahimi; Aghdasinia, H.; Mohammadpourfard, Mousa; Heris, S. ZeinaliThermal energy storage systems (TESS) have emerged as significant global concerns in the design and optimization of devices and processes aimed at maximizing energy utilization, minimizing energy loss, and reducing dependence on fossil fuel energy for both environmental and economic reasons. Phase change materials (PCMs) are widely recognized as promising candidates due to their high latent heat storage (LHS) capacity. This review thoroughly evaluates the computational fluid dynamics (CFD) studies conducted in various sections, encompassing materials, modeling, simulation, as well as the results, advantages, and disadvantages of these works. The study is organized into three distinct sections. The first section discusses the applications of PCMs in various areas, including lithium-ion batteries, solar applications, building applications, electronics, and heating and cooling systems. The second section provides a comprehensive summary of cylindrical, rectangular, spherical, arbitrary shapes, and packed-bed geometries employed in TESS. The third section investigates the different types of materials used as PCMs. Based on the findings of this study, it can be concluded that industrial applications of hybrid nanocomposites incorporating PCMs in different geometries pose challenges, particularly in three-dimensional (3D) settings, where instability becomes a significant concern. Hence, further research and investigation are necessary to address these challenges adequately. In conclusion, this study serves as a reference review for future research endeavors in the field of simulating various PCMs in different geometries and applications. It provides valuable insights into the current state of knowledge, highlights potential areas for improvement, and offers guidance for advancing simulation techniques related to PCMs.Article Citation - WoS: 36Citation - Scopus: 37Numerical Investigation of Melting Process for Phase Change Material (pcm) Embedded in Metal Foam Structures With Kelvin Cells at Pore Scale Level(Elsevier, 2023) Sabet, Safa; Buonomo, Bernardo; Sheremet, Mikhail A.; Manca, OronzioThe present numerical study analyzes the melting process of phase change material (PCM) embedded in a metallic foam structure at pore scale level. The computational domain consists of two different sizes of 3D cubic boxes. The analyzed domain is filled with Kelvin cell-structures with different Cell Per Length (CPL) and constant porosity of 0.956. A constant temperature, higher than the melting temperature of PCM, is assigned to one external surface of the enclosure, while the other surfaces are adiabatic. The conjugate problem for the heat transfer between the PCM and the solid structure with Kelvin cells is developed. Enthalpy-porosity method is used to describe the PCM melting process. The finite volume method is used to solve the conjugate heat transfer problem at pore scale level by Ansys-Fluent code. A comparison of different CPL values is reported in terms of liquid fraction, average temperature of the PCM, and energy storage. The comparison is also considered between the two different volumes of the cubic boxes. The presence of the metallic structured Kelvin cells increases the overall heat transfer rate and decreases the melting time. Results for smaller cavity indicates that as the CPL number increases, the time required for the PCM melting process decreases. Furthermore, the total heat accumulation process takes a shorter time to reach the maximum value. The melting time and the duration of heat accumulation are worsened for the large cubic box (L = 4 inch) at CLP>6. This is due to the dominant viscous effect, which decreases the velocity induced by the buoyancy forces because of higher contact surface area. In these cases, heat transfer between liquid and solid phases of the PCM decreases substantially. © 2023 Elsevier LtdArticle Citation - WoS: 3Citation - Scopus: 3Computation Time Reduction of Pcm Melting Process by Changing Modeling Parameters(Taylor & Francis, 2022) Demirkıran, İsmail Gürkan; Çetkin, ErdalThis study can be considered as a helpful reference for whom endeavor to boost the computation efficiency of the PCM melting process. Researchers sacrifice accuracy to decrease computation time since computational fluid dynamics (CFD) solutions of PCM melting processes require comparatively very long time, i.e., from hours to days or weeks, depending on the system geometry. The present study compares the approaches recommended in the literature in terms of their influence on computation time reduction and accuracy. A horizontally finned tube LHTES unit is modeled in 2-D space using ANSYS Fluent, the most common commercial CFD software for the considered problem in the literature. The outcomes obtained from the attempts to boost the computation efficiency are as follows: adaptive time step size approach causes 72% enhancement in computation time (from 90 hours to 25 hours), frozen flux algorithm and constant thermophysical properties have almost no influence on computation time. Even though low convergence criteria and neglecting natural convection reduces computation time drastically, the errors in accuracy are not in acceptable level.Article Citation - WoS: 22Citation - Scopus: 22Emergence of Rectangular Shell Shape in Thermal Energy Storage Applications: Fitting Melted Phase Changing Material in a Fixed Space(Elsevier, 2021) Demirkıran, İsmail Gürkan; Çetkin, ErdalHere we document the effect of heat transfer fluid (HTF) tube position and shell shape on the melting time and sensible energy requirement for melting a phase change material (PCM) in a multitube latent heat thermal energy storage (LHTES) application. Tube location and shell shape are essential as the shape of the melted region, i.e. similar to the boundary layer, affects convective heat transfer performance. HTF tube total area is fixed in all cases to have the same amount of PCM. In order to eliminate the effect of heat transfer surface area variation, results of two- and four-tube configurations were compared within themselves. Liquid fraction, sensible enthalpy content, and latent/sensible enthalpy ratio relative to time were documented for two and four HTF configurations in various shell shape and tube locations. Results show that eccentric two tubes with rectangular shell decreases melting time and sensible energy requirement from 67 min to 32 min and from 161.8 kJ/kg to 136.3 kJ/kg for 72.3% liquid fraction, respectively, in comparison to the concentric tubes with the circular shell. When the number of HTF tubes increases to four, then the required melting time and sensible energy decrease 80% and 3.8%, respectively, for PCM to melt completely as the concentric tubes and circular shell is replaced with eccentric tubes and rectangular shell. Results of liquid fraction variation relative to time show that S-curve of melting becomes steeper if PCM distribution is such that the intersection of melted regions is delayed. Therefore, melted PCM regions could be packed into a shell that minimizes melting time and required sensible energy. Even rectangular shell shape increases the heat transfer surface (increased heat loss rate) because melting time has decreased greatly, total energy lost to the ambient from the surfaces of shell decreases. Eccentricity slows down the solidification process but due to increased heat loss rate from the surface, rectangular shell enables faster solidification than circular shell shape. There is a trade off in between solidification time and heat loss energy for rectangular channels which can be optimized by selecting proper insulation thickness. Overall, the results show that without any thermal conductivity enhancement (TCE) method, melting performance and latent heat storage capability can be significantly enhanced as decreasing the sensible heat storage by fitting the melted PCM regions into a fixed space for the applications where charging speed is lot faster than discharging.Article Citation - WoS: 120Citation - Scopus: 136Numerical Study on Latent Thermal Energy Storage Systems With Aluminum Foam in Local Thermal Equilibrium(Elsevier, 2019) Buonomo, Bernardo; Çelik, Hasan; Ercole, Davide; Manca, Oronzio; Mobedi, MoghtadaThe paper analyzes the behavior of a Latent Heat Thermal Energy Storage system (LHTES) with a Phase Change Material (PCM), with and without aluminum foam. A numerical investigation in a two-dimensional domain is accomplished to investigate on the system thermal evolution. The enthalpy-porosity method is used to describe the PCM melting. The open-celled aluminum foam is described as a porous medium by means of the Darcy-Forchheimer law. A hollow cylinder represents the considered thermal energy storage and it consists of the enclosure between two concentric shell tubes. The external surface of the internal tube is at assigned temperature with a value greater than the melting PCM temperature, while the other surfaces are adiabatic. Local thermal equilibrium (LTE) is numerically adopted for modelling the heat transfer between the PCM and the solid matrix in aluminum foam. In the case with metal foam, simulations for different porosities are performed. A comparison in term of liquid fraction, average temperature of the system, temperature fields, stream function and a performance parameter are made between the clean case and porous assisted case for the different porosities. A scale analysis is developed for evaluating the time and the melting zone in different regimes (i.e. conduction, mixed conduction-convective and convective) during the melting processes of the PCM in porous media. Numerical simulation shows that aluminum foam increases overall heat transfer by a magnitude of two, with respect to the clean case.Article Citation - WoS: 12Citation - Scopus: 12An Evaluation Methodology Proposal for Building Envelopes Containing Phase Change Materials: the Case of a Flat Roof in Turkey’s Climate Zones(Taylor and Francis Ltd., 2017) Tokuç, Ayça; Yesügey, Sadık Cengiz; Başaran, TahsinPhase change materials (PCMs) can be used to enhance the thermal energy storage capacity of a building element to improve indoor thermal comfort conditions and decrease energy usage, yet these effects need to be carefully analysed to achieve the desired benefits. This paper proposes an evaluation methodology for building envelopes: first, a numerical computational fluid dynamics model is validated by experimental work; then, time-dependent simulations are used to analyse monthly energy requirements and heat flux. A sample flat roof is evaluated in terms of required cooling load with and without PCM in Turkey’s climate zones. Graphical phase change representations and heat flux results were used to evaluate the cooling load reduction in addition to the effects of PCM type and PCM amount and the necessity for night cooling. In conclusion, the methodology is flexible and can be utilized to evaluate the building element for various parameters.Article Citation - WoS: 54Citation - Scopus: 63An Experimental and Numerical Investigation on the Use of Phase Change Materials in Building Elements: the Case of a Flat Roof in Istanbul(Elsevier Ltd., 2015) Tokuç, Ayça; Başaran, Tahsin; Yesügey, Sadık CengizThis paper reports on the experimental and numerical analysis of a building element-a flat roof-that incorporates phase change material (PCM) as a layer. First, a planar model of the building element of 50 cm by 50 cm surface area was constructed in laboratory conditions to be used in the experimental work. During the experiment, changes in the thermal balance were investigated by temperature and volumetric flow rate measurements, as well as observation of the phase change interface. Next, the experimental measurements were used to validate a numerical computer fluid dynamics (CFD) model for simulation purposes. The model is one-dimensional and is based on the first law of thermodynamics. Finally, a time-dependent simulation for summer conditions was performed using the climatic data of Istanbul. The thickness of the PCM inside the roof element was investigated accordingly. The simulation data showed the solid/liquid phase of PCM over time. Monthly graphs were drawn for ease of comparison of the use of PCM with thicknesses varying between 1 and 5 cm. Consequently, a PCM thickness of 2 cm was found to be suitable for use in flat roofs in Istanbul.