WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
Search Results
Now showing 1 - 10 of 113
Article Citation - WoS: 20Citation - Scopus: 24Lime-Activated One-Part Geopolymer Mortars From Construction, Demolition and Industrial Wastes(Elsevier, 2024) Kogbara, Reginald B.; Al-Zubi, Abdelrahman; Mortada, Youssef; Hammoud, Ahmad; Masad, Eyad A.; Khraisheh, Marwan K.This work focused on the production of one-part geopolymer mortars from construction and demolition wastes (CDW) blended with steel slag. Previous related studies on geopolymer production from CDW utilized conventional two-part geopolymers comprised of highly alkaline activator solutions and CDW materials. Thus, the study's significance consists in producing high-strength (≥35 MPa) ambient-cured mortars from CDW with predominantly concrete waste by replacing conventional highly alkaline activator solutions with an environmentally-friendly alkaline activator, Ca(OH)2 powder. Four mortar mixtures were produced with CDW contents ranging from 50 to 65 % dry weight, varying the brick waste content from 3 to 18 %. The effect of elevated temperature (40 °C) curing was also considered. The results showed that 55 % CDW content had optimum performance across all parameters studied such as compressive and flexural strengths, setting time, as well as changes in nuclear magnetic resonance (NMR)-determined pore structure (porosity and mean pore size) and x-ray diffraction (XRD)-determined degree of crystallinity over time. It had 28-day compressive and flexural strengths of 42 and 5.8 MPa, respectively, and initial and final setting times of 25 and 50 min. The importance of sufficient brick waste content in the geopolymer mixtures for effective mechanical performance is highlighted. The inclusion of concrete waste in powder form reduced compressive strength under ambient curing but improved performance at 40 °C curing. It is concluded that sustainable structural mortars can be produced by ‘just adding water’ to an optimized CDW mixture with predominantly concrete waste blended with brick waste and slag and activated by powdered Ca(OH)2. © 2023 The AuthorsArticle Citation - WoS: 101Citation - Scopus: 105Defect-Engineering Agsbte2 With High Thermoelectric Performance(Wiley, 2023) Zhang, Yu; Li, Zhi; Singh, Saurabh; Nozariasbmarz, Amin; Li, Wenjie; Genç, Aziz; Xia, YiThermoelectric (TE) generators enable the direct and reversible conversion between heat and electricity, providing applications in both refrigeration and power generation. In the last decade, several TE materials with relatively high figures of merit (zT) have been reported in the low- and high-temperature regimes. However, there is an urgent demand for high-performance TE materials working in the mid-temperature range (400–700 K). Herein, p-type AgSbTe2 materials stabilized with S and Se co-doping are demonstrated to exhibit an outstanding maximum figure of merit (zTmax) of 2.3 at 673 K and an average figure of merit (zTave) of 1.59 over the wide temperature range of 300–673 K. This exceptional performance arises from an enhanced carrier density resulting from a higher concentration of silver vacancies, a vastly improved Seebeck coefficient enabled by the flattening of the valence band maximum and the inhibited formation of n-type Ag2Te, and ahighly improved stability beyond 673 K. The optimized material is used to fabricate a single-leg device with efficiencies up to 13.3% and a unicouple TE device reaching energy conversion efficiencies up to 12.3% at a temperature difference of 370 K. These results highlight an effective strategy to engineer high-performance TE material in the mid-temperature range.Article Citation - WoS: 25Citation - Scopus: 38Biodiversity: the Overlooked Source of Human Health(Elsevier, 2023) Linhares, Yuliya; Kaganski, Alexander; Agyare, Christian; Aksan Kurnaz, Işıl; Neergheen, Vidushi; Kolodziejczyk, Bartlomiej; Baran, YusufBiodiversity is the measure of the variation of lifeforms in a given ecological system. Biodiversity provides ecosystems with the robustness, stability, and resilience that sustains them. This is ultimately essential for our survival because we depend on the services that natural ecosystems provide (food, fresh water, air, climate, and medicine). Despite this, human activity is driving an unprecedented rate of biodiversity decline, which may jeopardize the life-support systems of the planet if no urgent action is taken. In this article we show why biodiversity is essential for human health. We raise our case and focus on the biomedicine services that are enabled by biodiversity, and we present known and novel approaches to promote biodiversity conservation.Article Citation - WoS: 6Citation - Scopus: 6Polar Solvent-Free Room Temperature Synthesis of Cspbx3 (x = Br, Cl) Perovskite Nanocubes(Royal Society of Chemistry, 2023) Güvenç, Çetin Meriç; Kocabaş, Aşkın; Balcı, SinanConventionally, colloidal lead halide perovskite nanocubes have been synthesized by the hot-injection or ligand-assisted reprecipitation (LARP) methods. We herein demonstrate a polar solvent-free room temperature method for the synthesis of CsPbX3 (X = Br, Cl) nanocubes. In addition to the commonly used ligand pair of oleylamine and oleic acid, guanidinium (GA) has been used to passivate the surface of the nanocrystals. Our study demonstrates that GA inhibits the formation of low dimensional structures such as nanowires and nanoplatelets and further supports the formation of perovskite nanocubes. In fact, GA diminishes the restricted monomer-addition effect of long-chain oleylammonium (OLAM) ions to the nanocrystal. We show that above a critical GA/OLAM molar ratio, the synthesis yields homogeneous CsPbX3 (X = Br, Cl) nanocubes. Importantly, we observe the nucleation and growth kinetics of the GA-assisted CsPbBr3 nanocube formation by using in situ absorption and photoluminescence (PL) measurements. Small nanocrystals with an excitonic absorption peak at around 435 nm and photoluminescence (PL) maxima at 447 nm were nucleated and continuously shifted to longer wavelengths during the growth period. Crucially, our method allows the synthesis of CsPbCl3 nanocubes at room temperature without using polar organic solvents. The synthesized CsPbBr3, CsPb(Cl0.5Br0.5)3, and CsPbCl3 nanocubes have PL peaks at 508 nm, 443 nm, and 405 nm, photoluminescence quantum yields (PLQY) of 85%, 58% and 5%, and lifetimes of 18.98 ns, 18.97 ns, and 14.74 ns, respectively.Article Citation - WoS: 5Citation - Scopus: 5Screening Diatom Strains Belonging To Cyclotella Genus for Chitin Nanofiber Production Under Photobioreactor Conditions: Chitin Productivity and Characterization of Physicochemical Properties(Elsevier, 2023) Özkan, AltanDiatom species belonging to Cyclotella and Thalassiosira genera have the unique and industrially relevant ability to biosynthesize and extrude pure chitin nanofibers. The current understanding of diatom-based chitin production is narrowed by the complete reliance on the performance of a single strain. This study aims to facilitate the development of a wider understanding for enhanced industrial utility. For this purpose, six Cyclotella strains were cultivated under standardized process conditions of a bubble column photobioreactor, and the resulting productions were characterized in terms of rate and physicochemical properties. A two-stage cultivation protocol was followed where the cells were cultivated under silicon replete and then following its complete consumption under silicon deplete conditions. All the strains produced chitin fibers of β-form with relatively constant average diameters, ranging from 48 to 58 nm. Chitin production rates and final concentrations as well as fiber number densities and length distributions were highly strain-dependent. Dissolved silicon availability controlled chitin biosynthesis: following its depletion, the productivity of all the strains increased drastically. Two strains of marine origin, C. cryptica CCMP 332 and C. cryptica CCMP 333, generated the most favorable outcomes for commercial-scale production and had final concentrations of 272 ± 9 mg/L and 316 ± 12 mg/L, and maximum production rates of 48 ± 2 mg/L-day and 51 ± 2 mg/L-day, respectively. The superior performance of these strains was due to (i) the extrusion of more fibers per fiber port, in the case of C. cryptica CCMP 333 as many as 20.7 ± 1.0. indicating free fiber accumulation in suspension, and (ii) the biosynthesis of longer fibers, mean fiber lengths varied from 15 to 20 μm during cultivation. This study demonstrates the importance of species selection and silicon availability for diatom-based chitin production in terms of rate, final concentration, and nanofiber fiber length distributions.Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Article Citation - WoS: 11Citation - Scopus: 12Investigation of the Best Possible Methods for Wind Turbine Blade Waste Management by Using Gis and Fahp: Turkey Case(Springer, 2022) Öztürk, Samet; Karipoğlu, FatihThe aim of this study is to present the status and projections of wind turbine blade retirement in Turkey; to investigate the number of retiring WT blades in the regional, manufacturer, and material aspects; and to discuss the management methods for retired WT blades. To determine the best possible wind turbine blade waste management methods for Turkey, a combined application of Geographical Information Systems (GIS) and the Fuzzy Analytical Hierarchy Process (FAHP) is used in this study. It is found that around nine thousand WT blades will become waste between 2020 and 2039 in Turkey, corresponding to around 80,500 tons of waste. On average, 52,325 tons of glass/carbon and 28,175 tons of polymers will be accumulated between 2020 and 2039 from wind turbine blades. More than half of the WT blade waste will come from two WT manufacturers, namely, Enercon and Nordex. Aegean and Marmara regions will provide 74% of the blade waste, where 33% of them will be 2 MW and 2.5 MW sizes of WT blades. Furthermore, a case study is applied to Izmir city to demonstrate the results of FAHP for finding the best available method to dispose of WT blades. The results show that using blade waste as filling material is the best alternative, while waste-to-energy is the last favorable option for blade waste management. Finally, sensitivity analyses are applied to demonstrate the robustness of the results for the inclusion of new alternatives and the bias of experts’ judgments.Article Citation - WoS: 13Citation - Scopus: 14Perspectives of Biomass Catalytic Fast Pyrolysis for Co-Refining: Review and Correlation of Literature Data From Continuously Operated Setups(American Chemical Society, 2022) Prins, Wolter; Yıldız, GürayFor the co-processing of pyrolysis-based biocrudes within petroleum refineries, a degree of conditioning/upgrading involving the cracking of the oligomers and (partial) removal of oxygen could be operationally beneficial. By inducing a complex set of reactions in biomass-derived fast pyrolysis vapors, catalytic fast pyrolysis (CFP) ensures significant changes in oxygen functionalities and alleviates oxygen concentration in the resulting liquid intermediate (CFP-oil). Due to its reduced oxygen content and acidity, CFP-oil could be considered suitable for co-feeding in FCC units and/or for co-hydrotreatment (co-HT) with gas oils within the existing crude oil processing infrastructure. On the operational side, however, research concerning CFP of biomass has shown poor results: deoxygenation of pyrolysis vapors goes along with a progressive reduction in CFP-oil yield. Apart from any control over catalyst activity, selectivity, and lifetime, the other critical issue is in the process design, which is complicated by rapid catalyst deactivation through coke formation and catalyst poisoning by biomass-originated minerals. This review analyzes the outcome of research efforts concerning in- and ex situ CFP of biomass based on carefully selected literature studies reporting the results obtained from meso- and macrolevel laboratory-scale setups, pilot, process development units (PDU), and (semi-) commercial process units, wherein the biomass feedstock and catalyst is fed continuously. Key operational aspects such as the reactor technology, reactive medium, processing mode, and optimization of process parameters are addressed. The performances of continuously operated CFP units were benchmarked through a comparison of yields and elemental compositions of (by-)products. Despite the considerable research efforts related to CFP technology development, the co-processing of CFP-oil is still in its infancy. However, in close collaboration with refinery professionals, it could be made a serious candidate for biobased co-feeding. For refinery integration, quality parameters of CFP-oil, e.g., acidity, stability, and miscibility, should be considered as crucial as its oxygen content.Article Citation - WoS: 11Citation - Scopus: 10Redefining methods for augmenting lactic acid bacteria robustness and phenyllactic acid biocatalysis: Integration valorizes simplicity(Taylor & Francis, 2022) Meruvu, HarithaThe production of phenyllactic acid (PLA) has been reported by several researchers, but so far, no mention has been made of augmented PLA production using an orchestrated assembly of simple techniques integrated to improve lactic acid bacteria (LAB) metabolism for the same. This review summarizes sequentially tailoring LAB growth and metabolism for augmented PLA catalysis through several strategies like monitoring LAB sustenance by choosing appropriate starter PLA-producing LAB strains isolated from natural environments, with desirably fastidious growth rates, properties like acidification, proteolysis, bacteriophage-resistance, aromatic/texturing-features, etc.; entrapping chosen LAB strains in novel cryogels and/or co-cultivating two/more LAB strains to improve their biotransformation potential and promote growth dependency/sustainability; adopting adaptive evolution methods designed to improve LAB strains under selection pressure inducing desired phenotypes tolerant to stress factors like heat, salt, acid, and solvent; monitoring physico-chemical LAB fermentation factors like temperature, pH, dissolved oxygen content, enzymes, and cofactors for PLA biosynthesis; and modulating purification/downstream processes to extract substantial PLA yields. This review paper serves as a comprehensive preliminary guide that can evoke a strategic experimental plan to produce industrial-scale PLA yields using simple techniques orchestrated together in the pursuit of conserving time, effort, and resources.Article Citation - WoS: 14Citation - Scopus: 18The use of video clickstream data to predict university students’ test performance: A comprehensive educational data mining approach(Springer, 2022) Yürüm, Ozan Raşit; Taşkaya Temizel, Tuğba; Yıldırım, SonerVideo clickstream behaviors such as pause, forward, and backward offer great potential for educational data mining and learning analytics since students exhibit a significant amount of these behaviors in online courses. The purpose of this study is to investigate the predictive relationship between video clickstream behaviors and students’ test performance with two consecutive experiments. The first experiment was performed as an exploratory study with 22 university students using a single test performance measure and basic statistical techniques. The second experiment was performed as a conclusive study with 16 students using repeated measures and comprehensive data mining techniques. The findings show that a positive correlation exists between the total number of clicks and students’ test performance. Those students who performed a high number of clicks, slow backward speed or doing backwards or pauses achieved better test performance than those who performed a lower number of clicks, or who used fast-backward or fast-forward. In addition, students’ test performance could be predicted using video clickstream data with a good level of accuracy (Root Mean Squared Error Percentage (%RMSE) ranged between 15 and 20). Furthermore, the mean of backward speed, number of pauses, and number/percentage of backwards were found to be the most important indicators in predicting students’ test performance. These findings may help educators or researchers identify students who are at risk of failure. Finally, the study provides design suggestions based on the findings for the preparation of video-based lectures.