WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
5581 results
Search Results
Now showing 1 - 10 of 5581
Article Influence of Innovative Thawing Approaches on the Thermal and Chemical Structure Changes of Frozen Beef Liver(Springer, 2026) Avsar, Nazlican; Uzuner, SibelFreezing effectively preserves meat quality, but the formation of ice crystals during the process can impact tenderness and functionality. Thawing is a critical step, as it can lead to physicochemical changes-such as protein oxidation and further ice crystal growth-that may reduce product quality and consumer appeal. Therefore, the thawing method plays a key role in determining the final quality of frozen meat. This study evaluated the physicochemical and structural characteristics of beef liver frozen at - 18 +/- 2 degrees C for 20 h and thawed using three methods: water immersion thawing (WIT), ultrasonic bath thawing (UBT), and air fryer thawing (AFT). No significant differences in drip loss were observed among the UBT, AFT, and WIT samples (p > 0.05). Color measurements (L*, a*, b*) were significantly higher in raw liver than in AFT and UBT samples (p < 0.05). Compared to raw liver and the WIT method, AF and UB thawing lowered the denaturation temperature, indicating reduced thermal stability. The lowest metmyoglobin (MetMb) content was found in the UBT sample (36.57 +/- 0.87%), followed by the AFT sample (41.71 +/- 1.29%), suggesting better pigment preservation with UB thawing. Highlights circle AF and UB thawing methods resulted in a lower denaturation temperature. circle UBT showed the lowest MetMb content, helping to minimize oxidation. circle UBT caused less damage to protein chains and better preserved structural stability. circle UBT preserved desirable aroma characteristics more effectively.Article Anticancer Properties of Newly Synthesized Pyrrole Derivatives as Potential Tyrosine Kinase Inhibitors(Wiley, 2026) Kaya, Meltem; Kara, Yunus; Sanli-Mohamed, GulsahThe anticancer activity of a series of newly synthesized pyrrole derivatives was systematically evaluated in HeLa cervical cancer cells, focusing on their potential as tyrosine kinase inhibitors and modulators of the mTOR signaling pathway. This study builds on our previous synthetic work by investigating the biological effects of seven structurally characterized compounds (d1-d7). Among them, compounds d1 and d3 exhibited the most potent cytotoxicity, with IC50 values of 140.6 mu M and 366.4 mu M, respectively, after 48 h of treatment. Both compounds significantly impaired cell cycle progression-d1 induced S-phase arrest, while d3 caused G1-phase arrest-and markedly suppressed cell migration in wound healing assays. Mechanistically, these effects were accompanied by reduced phosphorylation of p70S6K (Thr389, Ser421/424) and increased p-4EBP1, indicating inhibition of mTORC1 signaling. These findings suggest that d1 and d3 are promising lead compounds with dual antiproliferative and anti-migratory activity in cervical cancer, mediated through modulation of the PI3K/Akt/mTOR axis.Article Disorder-Engineered Hybrid Plasmonic Cavities for Emission Control of Defects in hBN(American Chemical Society, 2026) Genc, Sinan; Yucel, Oguzhan; Aglarci, Furkan; Rodriguez-Fernandez, Carlos; Yilmaz, Alpay; Caglayan, Humeyra; Bek, AlpanDefect-based quantum emitters in hexagonal boron nitride (hBN) are promising building blocks for scalable quantum photonics due to their stable single-photon emission at room temperature. However, enhancing their emission intensity and controlling the decay dynamics remain significant challenges. This study demonstrates a low-cost, scalable fabrication approach to integrate plasmonic nanocavities with defect-based quantum emitters in hBN nanoflakes. Using the thermal dewetting process, we realize two distinct configurations: stochastic Ag nanoparticles (AgNPs) on hBN flakes and hybrid plasmonic nanocavities formed by AgNPs on top of hBN flakes supported on gold/silicon dioxide (Au/SiO2) substrates. While AgNPs on bare hBN yield up to a 2-fold photoluminescence (PL) enhancement with reduced emitter lifetimes, the hybrid nanocavity architecture provides a dramatic, up to 100-fold PL enhancement and improved uniformity across multiple emitters, all without requiring deterministic positioning. Finite-difference time-domain (FDTD) simulations and time-resolved PL measurements confirm size-dependent control over decay dynamics and cavity-emitter interactions. Our versatile solution overcomes key quantum photonic device development challenges, including material integration, emission intensity optimization, and spectral multiplexity.Article Ten Questions Concerning Circularity in the Built Environment(Pergamon-Elsevier Science Ltd, 2026) Kayacetin, N. Cihan; Aslanoglu, Rengin; Piccardo, Chiara; Afacan, Yasemin; Masera, Gabriele; Li, Qiuxian; Van Hoof, JoostThe rapid urbanisation of our societies calls for an urban renewal movement, including developing new areas to accommodate housing facilities and services and regenerating existing urban areas. Yet, urban renewal projects pose trade-offs impacting both environmental and socio-economic aspects. The renovation and new construction of buildings can escalate the use of energy and material resources as well as increasing greenhouse gas emissions. The European Union plays a leading role in promoting the transition towards sustainable and inclusive cities, whereas other regions such as North America, Australia and Asia follow suit via Circular Economy Action Plans or Frameworks, highlighting the need to enhance resource efficiency in buildings through the use of durable and circular materials. Current research on resource efficiency in buildings follows the Circular Economy concept, which aims to reduce the use of raw materials and the waste of existing materials while retaining their value for as long as possible. However, the role of the circular economy in sustainable transition and the adoption of its principles in urban contexts remain unclear while its practical implementation still faces significant challenges, including the lack of analytical instruments and assessment methods as well as co-creative approaches. This 'Ten Questions contribution' provides an overview of the pressing issues concerning circularity in the built environment, the state-of-the-art and best practices, challenges and benefits, policies and regulations, as well as numerous strategies applied on the building and neighbourhood level, assessment methodologies and future trends.Article Liposomal Encapsulation of a Synthetic Bromophenol for Antitumor Efficacy and Apoptotic Activity in Cancer Cells(Springer, 2026) Oztanrikulu, Bercem Dilan; Ozdemir, Ekrem; Avci, Bahri; Goksu, Suleyman; Bayrakceken, Handan Uguz; Askin, HakanA novel synthetic bromophenol (BP), inspired by marine-derived natural bromophenols, was evaluated for its antitumor activity and for the enhancement of its in vitro performance through liposomal encapsulation (LipoBP). Etoposide was used as a reference in characterization, release, and loading studies. PEGylated liposomes were employed to improve BP's solubility, bioavailability, and therapeutic potential. The cytotoxicity, apoptosis, and gene expression effects of free BP and LipoBP were assessed in A549 (lung) and MCF-7 (breast) cancer cell lines. WST-8 assays showed that encapsulation significantly increased BP's cytotoxic activity, particularly in A549 cells, while flow cytometry and Annexin V-FITC/PI analyses indicated more pronounced apoptotic induction by LipoBP compared with free BP. qRT-PCR analyses revealed upregulation of proapoptotic genes (BAX, CASP6, CASP3 and CASP9) and downregulation of antiapoptotic/survival genes (BCL-XL, IQSEC2) in both cell lines, indicating activation of intrinsic apoptotic pathways. Plain liposomes exhibited minimal cytotoxicity, confirming their biocompatibility. Liposomal bromophenol, which we have introduced to the literature for the first time, is expected to be a promising nanocarrier system that could be effective in cancer treatment by improving the therapeutic index of new drug candidates such as marine bromophenols.Article A Phenomenological Kinetic Flotation Model: Intrinsic Floatability Profiling for Batch and Continuous Flotation Systems(Springer Heidelberg, 2026) Polat, Mehmet; Guzel, Veli; Kobas, Muammer; Polat, HurriyetThis study presents a mechanistic flotation kinetics model that unifies the description of mineral particle floatability in both batch and continuous systems. Building on a physically explicit interpretation of bubble-particle interactions, the model introduces the concept of intrinsic floatability, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upphi }_{\text{P},\text{ij}}<^>{\text{s}}$$\end{document}, defined as the size-and composition-dependent probability that a particle within a bubble's sweep volume reports to the froth. A central feature of the framework is that \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\upphi }_{\text{P},\text{ij}}<^>{\text{s}}$$\end{document} is decoupled from system-level rate-determining factors, such as bubble-particle encounter frequency, transport limits, and bubble surface crowding-that otherwise confound attempts to extract floatability distributions from kinetic data. This separation is achieved through three explicit, time-dependent parameters: the encounter rate kappa(t), the limiting flotation rate mu(t), and the bubble saturation factor chi(t). Together, these parameters isolate intrinsic particle behavior from external constraints. The model naturally reduces to the classical first-order rate law in dilute pulps, while in concentrated suspensions it predicts systematic deviations, approaching zero-order kinetics as bubble surfaces saturate. Importantly, the same formulation applies seamlessly to batch tests and multi-stage continuous circuits, enabling a consistent theoretical framework across scales and ore types. Requiring only standard flotation data and known system parameters, the model is practical for both laboratory coal flotation studies and industrial non-coal applications. Validation using batch coal data and continuous plant-scale copper flotation results demonstrates its robustness and broad relevance.Article AI-Supported Seismic Performance Evaluation of Structures: Challenges, Gaps, and Future Directions at Early Design Stages(Elsevier Sci Ltd, 2026) Ak, Fatma; Ekici, Berk; Demir, UgurThis study reviews 91 journal articles that intersect with earthquake-resistant building design and artificial intelligence (AI)- based modeling, utilizing machine learning, deep learning, and metaheuristic optimization algorithms. Previous reviews on AI applications have examined engineering problems without considering the impact of architectural design parameters and structural irregularities on seismic performance. This review discusses the role of AI in integrating architectural design variables and seismic performance objectives, highlighting challenges, gaps, and future directions in the early design phase. The reviewed articles demonstrate that AI is successful in addressing seismic performance objectives; however, a holistic framework for assessing architectural and structural variables has not been presented. The review highlights key findings, gaps, and future directions for those involved in earthquake-resistant building design utilizing AI.Article Fluid-CO2 Injection in a Hypersaline Volcanic Systems: A Reactive Transport and Experimental Evaluation with Application to the Tuzla Geothermal Field, Turkiye(Springer, 2026) Tonkul, Serhat; Erol, Selcuk; Baba, Alper; Regenspurg, SimonaThis study evaluates the CO2 sequestration capability of the Tuzla Geothermal Field (TGF) in northwest T & uuml;rkiye under reservoir conditions (200 degrees C and 4.4 MPa). While ongoing studies at TGF have investigated CO2 co-injection primarily for geothermal heat extraction, the present study focuses on the associated potential for long-term CO2 storage. To this end, CO2-brine-rock interactions were examined through batch reactor experiments and reaction path modeling using the PhreeqC geochemical tool. The experiments revealed complex dissolution/precipitation reactions that altered reservoir properties, with mineralogical analyses (XRD, XRF, SEM, and EDS) showing the formation of secondary phases such as calcite, kaolinite, and Ca-rich aluminosilicates. These results indicate that the Tuzla reservoir rocks provide sufficient divalent cations to support mineral trapping under reservoir conditions. Overall, our findings highlight that, in addition to its promise for heat extraction, CO2 co-injection at TGF offers an opportunity for permanent geological storage, thereby strengthening the dual benefits of this approach.Article Hydrogeochemical Assessment and Health Risks of Groundwater in Sahand Volcanic Foreland (NW Iran): Arsenic Speciation and Heavy Metal Risk Indicators(Academic Press Inc Elsevier Science, 2026) Ghayurdoost, Farhad; Zarghami, Mahdi; Sadeghfam, Sina; Jabraili-Andaryan, Nasser; Nikmaram, Sara; Baba, Alper; Mosaferi, MohammadDue to the toxic nature of arsenic (As) and its elevated concentrations in many water resources, numerous studies have focused on understanding its origin, distribution, and impacts. This study aimed to identify the dominant As species in groundwater of the Sahand Volcanic Foothills, assess water quality indices, and examine heavy metal (HM) concentrations to address rising concerns about groundwater contamination. A total of 21 groundwater samples were collected and analyzed in accordance with world health organization (WHO) guidelines. Although most samples fell within acceptable ranges, several (notably S10, S20, and S21) exhibited elevated levels of total dissolved solids (TDS), electrical conductivity (EC), and HMs, particularly iron (Fe) and As. Hydrochemical assessments using Piper, Gibbs, Stiff, and Schoeller diagrams indicated that geochemical processes resulting from rock dissolution were the main factors controlling groundwater chemistry, with limited influence from anthropogenic pollution. According to the groundwater quality index (GWQI), most samples were categorized as "good" to "excellent," though some areas ranged from "moderate" to "very poor." HM pollution indices revealed that As concentrations exceeded permissible limits. Health risk assessments further showed that both oral and dermal exposure posed significant carcinogenic and non-carcinogenic risks, especially for children. Speciation analysis indicated that arsenate (As V) was the dominant form of As, consistent with oxidizing aquifer conditions, and is less biologically hazardous than arsenite (As III). The study highlights the necessity of continuous groundwater monitoring, effective pollution source management, and implementation of protective regulations to mitigate environmental and health risks in the region.Correction Development of Tissue-Engineered Vascular Grafts from Decellularized Parsley Stems (Vol 20, Pg 338, 2024)(Royal Society Chemistry, 2024) Cevik, Merve; Dikici, Serkan