WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
27 results
Search Results
Now showing 1 - 10 of 27
Article Citation - WoS: 1Citation - Scopus: 1A Multi-Layered Graphene Based Gas Sensor Platform for Discrimination of Volatile Organic Compounds Via Differential Intercalation(Royal Society of Chemistry, 2023) Özkendir İnanç, Dilce; Ng, Zhi Kai; Başkurt, Mehmet; Keleş, Berfin; Vardar, Gökay; Şahin, Hasan; Tsang, Siu Hon; Palaniappan, Alagappan; Yıldız, Ümit Hakan; Teo, EhtSelective and sensitive detection of volatile organic compounds (VOCs) is of critical importance for environmental monitoring, disease diagnosis and industrial applications. Among VOCs, assay development for primary alcohols has captured significant research attention since their toxicity causes adverse effects on gastrointestinal and central nerve systems, resulting in irreversible blindness, and coma, and can be even fatal at high exposure levels. However, selective detection of primary alcohols is extremely challenging owing to the similarity in their molecular structure and characteristic groups. Herein, we have attempted to investigate the differential methanol (MeOH)-ethanol (EtOH) discriminative properties of single-layer, bi-layer, and multi-layer graphene morphologies. Chemiresistors fabricated using the three morphologies of graphene illustrate discriminative MeOH-EtOH responses, which is attributed to the phenomenon of differential intercalation of MeOH within layered graphene morphologies as compared to that of EtOH. This hypothesis is verified by density functional theory calculations, which revealed that the adsorption of EtOH molecules on the graphene surface is more energetically favorable as compared to that of MeOH molecules, thereby inhibiting their intercalation within the layered graphene morphologies. It is further evaluated that the degree of MeOH intercalation increases with increasing layers of graphene for obtaining differential MeOH-EtOH responses. Experimental results suggest possibilities to develop selective and sensitive MeOH assays fabricated using various graphene morphologies in a combinatorial sensor array format.Article Citation - WoS: 2Citation - Scopus: 5Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants(Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa MuammerAntimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.Article Citation - WoS: 2Citation - Scopus: 2Magnetic Single-Layer Nanoribbons of Manganese Oxide: Edge- and Width-Dependent Electronic Properties(Royal Society of Chemistry, 2022) Sözen, Yiğit; Topkıran, Uğur; Şahin, HasanIn the present work, the structural, magnetic, and electronic properties of the two- and one-dimensional honeycomb structures of recently synthesized MnO [Zhang et al., Hexagonal metal oxide monolayers derived from the metal-gas interface, Nat. Mater., 2021, 20, 1073-1078] are investigated by using first-principles calculations. Our calculations show that the single-layer 2D MnO crystal has a degenerate antiferromagnetic (AFM) ground state and a relatively less favorable ferromagnetic (FM) state. In addition, the magnetic anisotropy calculations unveil that the easy-axis direction for magnetism originating from unpaired electron states in manganese atoms is normal to the crystal plane. Electronically, while the FM MnO is a direct semiconductor with a narrow bandgap, AFM phases display large indirect bandgap semiconducting behavior. Moreover, the calculations on nanoribbons of MnO reveal that zigzag-edged ribbons display metallic behaviors, whereas armchair-edged nanoribbons are semiconductors. Magnetically, for both zigzag- or armchair-edged nanoribbons, the AFM order perpendicular to the nanoribbon growth direction is found to be favorable over the other AFM and FM orders. Moreover, depending on the edge symmetry and ribbon width, forbidden bandgap values of nanoribbons display distinct family behaviors.Article Citation - WoS: 6Citation - Scopus: 7Interface-Dependent Phononic and Optical Properties of Geo/Moso Heterostructures(Royal Society of Chemistry, 2022) Yağmurcukardeş, Mehmet; Sözen, Yiğit; Başkurt, Mehmet; Peeters, François M.; Şahin, HasanThe interface-dependent electronic, vibrational, piezoelectric, and optical properties of van der Waals heterobilayers, formed by buckled GeO (b-GeO) and Janus MoSO structures, are investigated by means of first-principles calculations. The electronic band dispersions show that O/Ge and S/O interface formations result in a type-II band alignment with direct and indirect band gaps, respectively. In contrast, O/O and S/Ge interfaces give rise to the formation of a type-I band alignment with an indirect band gap. By considering the Bethe-Salpeter equation (BSE) on top of G0W0 approximation, it is shown that different interfaces can be distinguished from each other by means of the optical absorption spectra as a consequence of the band alignments. Additionally, the low-and high-frequency regimes of the Raman spectra are also different for each interface type. The alignment of the individual dipoles, which is interface-dependent, either weakens or strengthens the net dipole of the heterobilayers and results in tunable piezoelectric coefficients. The results indicate that the possible heterobilayers of b-GeO/MoSO asymmetric structures possess various electronic, optical, and piezoelectric properties arising from the different interface formations and can be distinguished by means of various spectroscopic techniques.Article Citation - WoS: 5Citation - Scopus: 5Raman and Optical Characteristics of Van Der Waals Heterostructures of Single Layers of Gap and Gase: a First-Principles Study(Royal Society of Chemistry, 2021) Sözen, Yiğit; Şahin, HasanOne of the effective methods to modulate or improve the fundamental properties of 2D van der Waals materials is building their heterostructures. In this study, we employ first-principles calculations based on density functional theory to predict the ground state properties of vertically aligned single layer crystals of GaP and GaSe. First, it is shown that, depending on the intimate contact atoms in GaP, the crystal formation of heterostructures displaying characteristics of type-I and type-II heterojunctions is possible. Here, the quasiparticle bandgaps for the spatially direct and indirect electronic transitions are calculated to be 2.70 and 1.78 eV, respectively. Vibrational analysis not only reveals the dynamic stability of the heterostructures but also allows the calculation of the Raman activity spectrum of each structure, providing a fingerprint of the stacking type. In addition, by solving the BSE equation on top of G(0)W(0) approximation, the optical gaps, reflectance and transmittance spectra of the heterostructures are determined. The calculated absorption spectra demonstrate that the spectral position and characteristics of the optical transitions are altered depending on the heterojunction type. Furthermore, it is found that the interband and intraband transitions in the GaP/GaSe heterostructures can also be monitored via their reflectance and transmittance spectra.Article Citation - WoS: 1Citation - Scopus: 1First-Principles Investigation of Structural, Raman and Electronic Characteristics of Single Layer Ge3n4(Elsevier, 2022) Yayak, Yankı Öncü; Sözen, Yiğit; Tan, Fırat; Güngen, Deniz; Gao, Q.; Kang, J.; Yağmurcukardeş, Mehmet; Şahin, HasanBy means of density functional theory-based first-principle calculations, the structural, vibrational and electronic properties of single-layer Ge3N4 are investigated. Structural optimizations and phonon band dispersions reveal that single-layer ultrathin form of Ge3N4 possesses a dynamically stable buckled structure with large hexagonal holes. Predicted Raman spectrum of single-layer Ge3N4 indicates that the buckled holey structure of the material exhibits distinctive vibrational features. Electronic band dispersion calculations indicate the indirect band gap semiconducting nature of single-layer Ge3N4. It is also proposed that single-layer Ge3N4 forms type-II vertical heterostructures with various planar and puckered 2D materials except for single-layer GeSe which gives rise to a type-I band alignment. Moreover, the electronic properties of single-layer Ge3N4 are investigated under applied external in-plane strain. It is shown that while the indirect gap behavior of Ge3N4 is unchanged by the applied strain, the energy band gap increases (decreases) with tensile (compressive) strain. © 2021 Elsevier B.V.Article Citation - WoS: 6Citation - Scopus: 6Novel Ultra-Thin Two-Dimensional Structures of Strontium Chloride(Royal Society of Chemistry, 2020) Akyol, Cansu; Başkurt, Mehmet; Şahin, HasanBy performing density functional theory-based calculations, possible stable ultra-thin crystal structures of SrCl(2)are investigated. Phonon calculations reveal that, among the possible crystal structures, three different phases; namely 1H, 1T, and square, are dynamically stable. In addition,ab initiomolecular dynamics calculations show that these three phases are thermally stable up to well above room temperature. Another important stability factor of crystals, the chemical inertness against abundant molecules in the atmosphere, such as N-2, O-2, H2O, and CO2, is also investigated. The analysis shows that SrCl(2)single-layers are chemically stable against these molecules. Moreover, it is determined that in contact with H2O and CO2, ultra-thin SrCl(2)sheets display unique electronic features, allowing them to be used in sensing applications. It is also shown that single layers of SrCl(2)crystals, all having a wide electronic band gap, can form type-I and type-II vertical van der Waals heterostructures with well-known 2D materials such as MoS2, WSe2, and h-BN.Article Citation - WoS: 20Citation - Scopus: 23Kagome-Like Silicene: a Novel Exotic Form of Two-Dimensional Epitaxial Silicon(Elsevier, 2020) Sassa, Yasmine; Johansson, Fredrik O. L.; Lindblad, Andreas; Yazdi, Milad G.; Simonov, Konstantin; Weissenrieder, Jonas; Le Lay, Guy; İyikanat, Fadıl; Şahin, HasanSince the discovery of graphene, intensive efforts have been made in search of novel two-dimensional (2D) materials. Decreasing the materials dimensionality to their ultimate thinness is a promising route to unveil new physical phenomena, and potentially improve the performance of devices. Among recent 2D materials, analogs of graphene, the group IV elements have attracted much attention for their unexpected and tunable physical properties. Depending on the growth conditions and substrates, several structures of silicene, germanene, and stanene can be formed. Here, we report the synthesis of a Kagome-like lattice of silicene on aluminum (1 1 1) substrates. We provide evidence of such an exotic 2D Si allotrope through scanning tunneling microscopy (STM) observations, high-resolution core-level (CL) and angle-resolved photoelectron spectroscopy (ARPES) measurements, along with Density Functional Theory calculations.Article Citation - WoS: 5Citation - Scopus: 6Boosting Up Printability of Biomacromolecule Based Bio-Ink by Modulation of Hydrogen Bonding Pairs(Elsevier Ltd., 2020) Köksal, Büşra; Önbaş, Rabia; Başkurt, Mehmet; Şahin, Hasan; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes low dose UV curable and bioprintable new bioink made of hydrogen bond donor-acceptor adaptor molecule 2-isocyanatoethyl methacrylate (NCO)modified gelatin (NCO-Gel). Our theoretical calculations demonstrate that insertion of 2-isocyanatoethyl methacrylate doubles the interaction energy (500 meV) between gelatin chains providing significant contribution in interchain condensation and self-organization as compared to methacrylic anhydride modified gelatin (GelMA). The NCO-Gel exhibits peak around 1720 cm?1 referring to bidentate hydrogen bonding between H-NCO and its counterpart O[dbnd]CN[sbnd]H. These strong interchain interactions drive chains to be packed and thereby facilitating UV crosslinking. The NCO-Gel is exhibiting a rapid, 10 s gelation process by the exposure of laser (3 W, 365 nm). The dynamic light scattering characterization also reveals that NCO-Gel has faster sol to gel transition as compared to GelMA depending on the UV curing time. The NCO-Gel was found to be more firm and mechanically strong that provides advantages in molding as well as bioprinting processes. Bioprinted NCO-Gel has shown sharp borders and stable 3D geometry as compared to GelMA ink under 10 s UV curing time. The cell viability tests confirm that NCO-Gel facilitates cell proliferation and supports cell viability. We foresee that NCO-Gel bioink formulation provides a promising opportunity when low dose UV curing and rapid printing are required. © 2020 Elsevier LtdArticle Citation - WoS: 7Citation - Scopus: 8Stable janus TaSe2 single-layers via surface functionalization(Elsevier Ltd., 2021) Kahraman, Zeynep; Başkurt, Mehmet; Yağmurcukardeş, Nesli; Chaves, A.; Şahin, HasanFirst-principles calculations are performed in order to investigate the formation of Janus structures of single-layer TaSe2. The structural optimizations and phonon band dispersions reveal that the formation and stability of hydrogenated (HTaSe2), fluorinated (FTaSe2), and the one-side hydrogenated and one-side fluorinated (Janus-HTaSe2F) single-layers are feasible in terms of their phonon band dispersions. It is shown that bare metallic single-layer TaSe2 can be turned into a semiconductor as only one of its surface is functionalized while it remains as a metal via its two surfaces functionalization. In addition, the semiconducting nature of single-layers HTaSe2 and FTaSe2 and the metallic behavior of Janus TaSe2 are found to be robust under applied uniaxal strains. Further analysis on piezoelectric properties of the predicted single-layers reveal the enhanced in-plane and out-of-plane piezoelectricity via formed Janus-HTaSe2F. Our study indicates that single-layer TaSe2 is a suitable host material for surface functionalization via fluorination and hydrogenation which exhibit distinctive electronic and vibrational properties. © 2020 Elsevier B.V.
- «
- 1 (current)
- 2
- 3
- »