WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7150

Browse

Filters

2011 - 2019192020 - 20222

Settings

Author: search.filters.author.Bulmuş, Volga

Search Results

Now showing 1 - 10 of 21
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Evaluating the Performance of Conventional Daf and Posidaf Processes for Cyanobacteria Separation at a Pilot Plant Scale
    (IWA Publishing, 2022) Yap, Russell K.L.; Rao, N. R.H.; Holmes, M.; Whittaker, Michael; Stuetz, Richard M.; Jefferson, Bruce; Bulmuş, Volga; Peirson, William Leslie; Henderson, R. K.
    In this work, a commercially available water treatment polymer poly(N,N-diallyl-N,N-dimethylammonium chloride) (PDADMAC) and a hydrophobically modified polymer (HMP) designed to adhere to bubble surfaces were applied for the first time in the novel Posi-dissolved air flotation process (PosiDAF) that uses polymer-modified bubbles, at pilot-scale for the treatment of waste stabilisation pond samples rich in algae. It was found that PDADMAC in PosiDAF gave comparable removal to that achieved using conventional DAF at .95% cell separation. Furthermore, the float layer was more uniform and thicker with up to 8% solid contents compared to conventional DAF, which comprised discrete floc clusters with an average solid concentration of ∼4.1%. In contrast to the use of PDADMAC, the application of the HMP did not achieve similarly good separation at pilot scale. It was hypothesised that this may be due to the micellisation of the HMP on the bubble surface, creating unstable bubbles that coalesced and prevented polymer-bubble-cell interactions, which are crucial for effective cell separation. On comparison of the costs of PosiDAF and conventional DAF, it was found that PosiDAF resulted in cost-savings of up to 74% due to low chemical consumption. In summary, PosiDAF reduced chemical cost and increased solid contents in the metal-free float.
  • Article
    Citation - Scopus: 1
    A Diaminoethane Motif Bearing Low Molecular Weight Polymer as a New Nucleic Acid Delivery Agent
    (Elsevier, 2021) Zelcak, Aykut; Ünal, Yağmur Ceren; Meşe, Gülistan; Bulmuş, Volga
    Among polymer-based gene delivery systems, poly(ethylene imine) (PEI) stands out as an effective polycation. However, the toxic effects of PEI especially at higher molecular weights limit its usage. Although the effects of PEI's architecture and molecular weight on gene delivery is controversial in literature, low molecular weight PEI appears to be efficient at transfection while having lower toxicity. Herein, as an alternative to low molecular weight, linear PEI, a methacrylate polymer bearing diamimoethane motifs, poly(2-((2-aminoethyl)amino)ethyl methacrylate) (P(AEAEMA)), was evaluated in vitro as a new nucleic acid delivery agent. P(AEAEMA) (8 kDa) showed low toxicity on Skov-3-luc and NIH/3T3 cell lines at polymer concentrations where PEI (8 kDa) was highly toxic. P(AEAEMA) could efficiently form complexes with siRNA at an N/P ratio of 2 as shown by gel electrophoresis. The diameter of P(AEAEMA)-siRNA complexes was found to be significantly lower than PEIsiRNA complexes almost at all tested N/P ratios. P(AEAEMA) could improve the stability of siRNA in serum containing media by protecting the siRNA against serum nucleases. siRNA and pDNA transfection efficiency of P (AEAEMA) on luciferase expressing Skov-3-luc cell line and HEK 293T cell line, respectively was found to be comparable to well-known nucleic acid carrier, PEI. The transfection efficiency of both P(AEAEMA) and PEI was found to be cell-type-dependent. None of the polymers were able to transfect MDA-MB-231 cells with siRNA or pDNA.
  • Article
    Citation - WoS: 111
    Stabilization of Magnetic Iron Oxide Nanoparticles in Biological Media by Fetal Bovine Serum (fbs)
    (American Chemical Society, 2011) Wiogo, Hilda T. R.; Lim, May; Bulmuş, Volga; Yun, Jimmy; Amal, Rose
    A facile method of stabilizing magnetic iron oxide nanoparticles (MNPs) in biological media (RPMI-1640) via surface modification with fetal bovine scrum (FBS) is presented herein. Dynamic light scattering (DLS) shows that the size of the MNP aggregates can be maintained at 190 +/- 2 nm for up to 16 h in an RPMI 1640 culture medium containing >= 4 vol % FBS. Under transmission electron microscopy (TEM), a layer of protein coating is observed to cover the MNP surface following treatment with FBS. The adsorption of proteins is further confirmed by X-ray photoelectron spectroscopy (XPS). Gel electrophoresis and LC-MS/MS studies reveal that complement factor I-I, antithrombin, complement factor I, alpha-1-antiproteinase, and apolipoprotein E are the proteins most strongly attached to the surface of all MNP. These surface-adsorbed proteins serve as a linker that aids the adsorption of other serum proteins, such as albumin, which otherwise adsorb poorly onto MNPs. The size stability of FBS-treated MNPs in biological media is attributed to the secondary adsorbed proteins, and the size stability in biological media can be maintained only when both the surface-adsorbed proteins and the secondary adsorbed proteins are present on the particle's surface.
  • Conference Object
    Raft-Synthesis of Cholesterol Conjugated Polymers as Potential Therapeutic Carriers
    (American Chemical Society, 2011) Sevimli, Sema; İnci, Fatih; Bulmuş, Volga
    [No abstract available]
  • Article
    Citation - WoS: 34
    Doxorubicin Conjugated, Crosslinked, Pegylated Particles Prepared Via One-Pot Thiol-Ene Modification of a Homopolymer Scaffold: Synthesis and in Vitro Evaluation
    (Royal Society of Chemistry, 2011) Wong, Lingjiun; Kavallaris, Maria; Bulmuş, Volga
    Doxorubicin (Dox)-conjugated, poly(ethylene glycol) (PEG) shielded, reversibly crosslinked particles were prepared by a one-pot thiol-ene reaction from a RAFT-synthesized well-defined homopolymer scaffold, poly(pyridyldisulfide ethylmethacrylate) (PPDSM). Dox and PEG modified with maleimide end-groups (mal-Dox and mal-PEG), were covalently attached in one pot to free thiol groups of PPDSM (M-n = 8900 g mol(-1) and PDI = 1.18) in the presence of a disulfide reducing agent. similar to 50% of the total pyridyldisulfide units were conjugated with Dox and PEG (with an equal mol ratio). Particles with an average hydrodynamic diameter of 192 +/- 28 nm were observed to form after conjugation. Incubation of these particles with a disulfide reducing agent resulted in the disassociation of the particles. The release of Dox from the particles was pH dependent. The Dox-conjugated PEGylated particles (with a Dox content of 8 wt%) inhibited the viability of human cervical carcinoma cells (HeLa) with an IC50 value of 8 X 10(-7) M, determined by an Alamar Blue assay, while the IC50 of free Dox was 1 X 10(-7) M. The fluorescence microscopy analyses of the HeLa cells after incubation with the particles for varying times showed that the Dox carried by the particles is taken up efficiently by the cells.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 6
    Efficient Synthesis of Crgd Functionalized Polymers as Building Blocks of Targeted Drug Delivery Systems
    (Elsevier Ltd., 2018) Thankappan, Hajeeth; Zelçak, Aykut; Taykoz, Damla; Bulmuş, Volga
    Synthetic peptides with cyclic arginine-glycine-aspartate motif (cRGD) play an important role in cell recognition and cell adhesion. cRGD-decorated soluble polymers and polymeric nanoparticles have been increasingly used for cell-specific delivery of antitumor drugs. While the significance of cRGD modification for tumor cell-specific targeting of polymeric carriers is well-accepted, straightforward procedures ensuring the fidelity of cRGD modification of polymeric systems are still lacking. Herein, we have reported an in-situ polymerization approach for synthesis of cRGD-end-functionalized well-defined polymers as potential building blocks of targeted drug delivery systems. A new cRGD peptide functionalized RAFT agent was synthesized as confirmed by MALDI-TOF and 1H NMR spectroscopy. The ability of this RAFT agent to control polymerizations was then tested using two different monomers oligoethyleneglycol acrylate and t-butyl methacrylate. The RAFT-controlled character of polymerizations and the living characteristic of the synthesized polymers were investigated through a series of kinetic experiments. The cytotoxicity and targeting capability of cRGD-functionalized OEGA polymers were investigated using cell lines expressing αvβ3 integrins at varying extents.
  • Article
    Citation - WoS: 36
    Citation - Scopus: 38
    Effect of Molecular Architecture on Cell Interactions and Stealth Properties of Peg
    (American Chemical Society, 2017) Özer, İmran; Tomak, Aysel; Zareie, Hadi M.; Baran, Yusuf; Bulmuş, Volga
    PEGylation, covalent attachment of PEG to therapeutic biomolecules, in which suboptimal pharmacokinetic profiles limiting their therapeutic utility are of concern, is a widely applied technology. However, this technology has been challenged by reduced bioactivity of biomolecules upon PEGylation and immunogenicity of PEG triggering immune response and abrogating clinical efficacy, which collectively necessitate development of stealth polymer alternatives. Here we demonstrate that comb-shape poly[oligo(ethylene glycol) methyl ether methacrylate] (POEGMA), a stealth polymer alternative, has a more compact structure than PEG and self-organize into nanoparticles in a molecular weight dependent manner. Most notably, we show that comb-shape POEGMA promotes significantly higher cellular uptake and exhibits less steric hindrance imposed on the conjugated biomolecule than PEG. Collectively, comb-shape POEGMA offers a versatile alternative to PEG for stealth polymer-biomolecule conjugation applications.
  • Article
    Citation - WoS: 65
    Citation - Scopus: 72
    Effect of Peg Grafting Density and Hydrodynamic Volume on Gold Nanoparticle-Cell Interactions: an Investigation on Cell Cycle, Apoptosis, and Dna Damage
    (American Chemical Society, 2016) Uz, Metin; Bulmuş, Volga; Alsoy Altınkaya, Sacide
    In this study, interactions of polyethylene glycol (PEG)-coated gold nanoparticles (AuNPs) with cells were investigated with particular focus on the relationship between the PEG layer properties (conformation, grafting density, and hydrodynamic volume) and cell cycle arrest, apoptosis, and DNA damage. Steric hindrance and PEG hydrodynamic volume controlled the protein adsorption, whereas the AuNP core size and PEG hydrodynamic volume were primary factors for cell uptake and viability. At all PEG grafting densities, the particles caused significant cell cycle arrest and DNA damage against CaCo2 and PC3 cells without apoptosis. However, at a particular PEG grafting density (∼0.65 chains/nm2), none of these severe damages were observed on 3T3 cells indicating discriminating behavior of the healthy (3T3) and cancer (PC3 and CaCo2) cells. It was concluded that the PEG grafting density and hydrodynamic volume, tuned with the PEG concentration and AuNP size, played an important role in particle-cell interactions.
  • Article
    Citation - WoS: 31
    Citation - Scopus: 32
    Synthesis, Self-Assembly and Stimuli Responsive Properties of Cholesterol Conjugated Polymers
    (Royal Society of Chemistry, 2012) Sevimli, Sema; Sagnella, Sharon; Kavallaris, Maria; Bulmuş, Volga; Davis, Thomas P.
    Reversible addition-fragmentation chain transfer (RAFT) polymerization was used to generate well-defined pH-responsive biofunctional polymers as potential 'smart' gene delivery systems. A series of five poly(dimethylamino ethyl methacrylate-co-cholesteryl methacrylate) P(DMAEMA-co-CMA) statistical copolymers, with similar molecular weights and varying cholesterol content, were prepared. The syntheses, compositions and molecular weight distributions for P(DMAEMA-co-CMA) were monitored by nuclear magnetic resonance (NMR), solid-state NMR and gel permeation chromatography (GPC) evidencing well-defined polymeric structures with narrow polydispersities. Aqueous solution properties of the copolymers were investigated using turbidimetry and light scattering to determine hydrodynamic diameters and zeta potentials associated with the phase transition behaviour of P(DMAEMA-co-CMA) copolymers. UV-Visible spectroscopy was used to investigate the pH-responsive behaviour of copolymers. Hydrodynamic radii were measured in the range 10-30 nm (pH, temperature dependent) by dynamic light scattering (DLS). Charge studies indicated that P(DMAEMA-co-CMA) polymers have an overall cationic charge, mediated by pH. Potentiometric studies revealed that the buffering capacity and pK a values of polymers were dependent on cholesterol content as well as on cationic charge. The buffering capacity increased with increasing charge ratio, overall demonstrating transitions in the pH endosomal region for all five copolymeric structures. Cell viability assay showed that the copolymers displayed increasing cytotoxicity with decreasing number of cholesterol moieties. These preliminary results show the potential of these well-defined P(DMAEMA-co-CMA) polymers as in vitro siRNA delivery agents.
  • Article
    Citation - WoS: 38
    Citation - Scopus: 38
    Ph- and Temperature-Responsive Amphiphilic Diblock Copolymers of 4-Vinylpyridine and Oligoethyleneglycol Methacrylate Synthesized by Raft Polymerization
    (Elsevier Ltd., 2014) Topuzogulları, Murat; Bulmuş Zareie, Volga; Bulmuş, Volga; Dalgakıran, Eray; Dinçer, Sevil
    Diblock copolymers of 4-vinylpyridine (4VP) and oligoethyleneglycol methyl ether methacrylate (OEGMA) were synthesized for the first time using RAFT polymerization technique as potential drug delivery systems. Effects of the number of ethylene glycol units in OEGMA, chain length of hydrophobic P4VP block, pH, concentration and temperature on the solution behavior of the copolymers were investigated comprehensively. Copolymer chains formed micelles at pH values higher than 5 whereas unimeric polymers were observed to exist below pH 5, owing to the repulsion between positively charged P4VP blocks. The size of the micelles was dependent on the relative length of blocks, P4VP and POEGMA. Thermo-responsive properties of copolymers were investigated depending on the pH and length of P4VP block. The increase in the length of P4VP block decreased the LCST substantially at pH 7. At pH 3, LCST of copolymers shifted to higher temperatures due to the increased interaction of copolymers with water through positively charged P4VP block.