WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
46 results
Filters
Settings
Search Results
Now showing 1 - 10 of 46
Article Citation - WoS: 9Citation - Scopus: 18Improvement of Photophysical Properties of Cspbbr3 and Mn2+:cspb(br,cl)(3) Perovskite Nanocrystals by Sr2+ Doping for White Light-Emitting Diodes(American Chemical Society, 2022) Yüce, Hürriyet; Mandal, Mukunda; Yalçınkaya, Yenal; Andrienko, Denis; Demir, Mustafa MuammerAll-inorganic metal halide perovskite nanocrystals (NCs) having the general formula ABX(3), where A is a monovalent cation, for example, Cs+, B is a divalent cation, typically Pb2+, and X is Cl-, Br-, I-, or their binary mixture, show potential in optoelectronic devices. In this work, we explore the effect of B-site doping on the optoelectronic properties of CsPbX3 NCs (X = Br, Cl). First, the Pb2+ ions in the pristine CsPbBr3 NC are partially substituted by Mn2+ ions. The alkaline earth metal strontium is then doped on both pristine and the Mn2+-substituted NCs. We found that a small percentage of Sr2+ doping remarkably improves the photoluminescence quantum yield of CsPbBr3 and Mn2+-state emission in Mn2+:CsPb(Br,Cl)(3) NCs. Perovskite NC film/ poly(methyl methacrylate) composites with all four NC variants were used in a white light-emitting diode (WLED), where Sr2+ doping increased the luminous efficiency of the WLED by similar to 4.7%. We attribute this performance enhancement to a reduced defect density and an attenuated microstrain in the local NC structure.Article Citation - WoS: 2Citation - Scopus: 5Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants(Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa MuammerAntimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.Article Citation - WoS: 7Citation - Scopus: 10Enhanced Light–matter Interaction in a Hybrid Photonic–plasmonic Cavity(Springer, 2021) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet NaciStrongly concentrated optical fields around a metal nanoparticle in the close vicinity of a dipole noticeably facilitate dramatic changes in the localized density of states due to hybrid photonic–plasmonic mode couplings as compared to that of the pure cavity mode fields. Significant variations of the field intensity in the presence of the metal nanoparticle elucidate enhanced light–matter interaction in a hybrid structure. The enhancement factor of the light–matter interaction is studied through the single-atom cooperativity parameter, which is directly proportional to the ratio of the fluorescence lifetimes of the off-resonant and on-resonant emission. A compact and cost-effective hybrid device, which includes a microfiber cavity, supporting whispering gallery modes, and a well-defined solid nanostructure, consisting of a gold nanoparticle core, overcoated by a silica shell, and decorated with CdS/CdSe quantum dots, is demonstrated to offer an outstanding potential for the enhancement of light–matter interaction. Surface plasmons of a gold nanoparticle, placed inside a hollow cylindrical nanostructure at the surface of a microfiber, are activated upon excitation of the dipoles of the quantum emitters, which are on-resonance with the whispering gallery mode. Time-resolved experiments demonstrate that the single-atom cooperativity parameter of the quantum dots is enhanced by a factor of about 4.8 in the presence of the gold nanoparticle being simultaneously in strong interaction with the cavity mode field and the metal nanoparticle’s surface plasmons.Correction Correction To: Enhanced Light–matter Interaction in a Hybrid Photonic–plasmonic Cavity(Springer, 2022) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet NaciIn this article the statement in the Funding information section was incorrect. The correct Funding information is as follows. ‘Dr Belkıs Gökbulut acknowledges TUBITAK for the financial support provided under Contract Number 120F323’.Article Citation - WoS: 10Citation - Scopus: 10Hydrogeology and Hydrogeochemistry of the Geothermal Systems and Its Direct Use Application: Balçova-Narlıdere Geothermal System, İzmir, Turkey(Elsevier, 2022) Baba, Alper; Sözbilir, Hasan; Sayık, Tolga; Arslan, Sinan; Uzelli, Taygun; Tonkul, Serhat; Demir, Mustafa MuammerThe Balçova-Narlıdere geothermal system, located in western Turkey, is an extensional domain type geothermal play. Geological, hydrogeological, and geothermal studies have been done in the Balçova-Narlıdere geothermal field since 1960. As a result of these studies, production and research wells were drilled in the area by both the public and private sectors. Of the 37 wells drilled in the Balçova-Narlıdere geothermal field, 26 were drilled by İzmir Geothermal Energy Company Inc. (16 productions, 4 re-injection, 4 gradientst, 2 unused) and 11 by the İzmir Governorship Investment Monitoring and Coordination Department and companies in the private sectors. There are two reservoirs, one shallow and one deep, in the geothermal field. Well depths are less than 200 m in the shallow reservoir. The deep production wells have depths ranging from 400 to 1,100 m and reservoir temperatures reaching 140 °C. The electrical conductivity (EC) values in the shallow production wells range from 1,200 to 1,500 µS/cm. EC values in the deep production wells vary from 1,871 to 2,025 µS/cm, and all geothermal fluids in the field are mineral-rich waters. In the İzmir geothermal district heating system, the newest technologies are used, and operational costs are very low. İzmir Geothermal Energy Company Inc. has been operating since 1996 and has reached 38,460 residences. The current capacity of the system is approximately 160 MWt. Cooling systems continue to spread in Turkey, focusing on electric air conditioning systems and geothermal heating systems, but both economic and applicability problems have slowed the expansion of cooling systems. However, İzmir Geothermal Energy Company Inc. began operating its first geothermal cooling application in Balçova in 2018, cooling 1,900 m2 of the indoor area by lithium bromide absorption and 90/85 °C geothermal temperature regime by supplying 6/9 °C clean cold water to the coolers in the buildings. These results show that the extensional domain type geothermal system in the Balçova-Narlıdere region is suitable for both heating and cooling applicationsArticle Citation - WoS: 5Citation - Scopus: 7Effect of High Salinity and Temperature on Water-Volcanic Rock Interaction(Springer, 2021) Gören, Ayşegül Yağmur; Gören, Ayşegül Yağmur; Topçu, Gökhan; Demir, Mustafa Muammer; Demir, Mustafa M.; Baba, Alper; Baba, AlperIn order to understand the processes occurring in natural hydrothermal systems, it was carried out a series of water-volcanic rock interaction studies in the laboratory and an intermediate volcanic rock samples from geothermal production wells in Tuzla geothermal field (TGF) in western Turkey. A high-pressure autoclave was used to conduct water-rock interaction experiments under similar conditions of the field. Rainwater and seawater were treated with volcanic rocks at 140 degrees C (reservoir temperature) and 4.5 bar pressure. The change in the ionic content of the resulting fluids was examined in terms of the type of volcanic rocks and mineral saturation index. The results indicate that talc and diopside minerals in geothermal systems may cause scaling at high temperatures depending on the geothermal fluid and pH.Article Citation - WoS: 3Citation - Scopus: 5Plasmon-Induced Spectral Tunability of Perovskite Nanowires(Elsevier, 2021) Gökbulut, Belkıs; Topçu, Gökhan; Demir, Mustafa Muammer; İnci, Mehmet NaciIn this paper, plasmon-assisted spectral tunability in random media, composed of Perovskite (CsPbBr3) nanowires surrounded by Au nanoparticle clusters in polystyrene matrix, is achieved. The interaction between the surface plasmons and the quantum sources is observed to generate photoluminescence from the higher excited state energy levels of the excited semiconductor nanowires, which results in a blueshifted fluorescence emission of 50 nm. The localized surface plasmon properties are also determined to be tuned by plasmonic pumping of the quantum sources at different resonant frequencies. Thus, the first observation of the tunable blueshifted fluorescence emission of the semiconductor nanocrystals surrounded by plasmonic nanoparticle aggregates is achieved. The dramatic changes in the spectral profiles of the fluorescent nanowires are attributed to be due to the fast dynamics surface enhanced fluorescence mechanism.Article Citation - WoS: 14Citation - Scopus: 16Bodipy-Based Organic Color Conversion Layers for Wleds(Elsevier, 2020) Yüce, Hürriyet; Güner, Tuğrul; Dartar, Suay; Kaya, Beraat Umur; Emrullahoğlu, Mustafa; Demir, Mustafa MuammerThe usage of organic dyes in phosphor conversion layer of WLED is an attractive approach since they have high molar extinction coefficient and photostability. Various types of organic pigments have been employed for this purpose such as BODIPY, perylene diimide, Rhodamine B, pyrene, Nile red, etc. Among those, BODIPY-based organic dyes appear to be promising candidate for white light generation. In this work, for the first time, red and green emitting BODIPY-based organic molecules have been used as colour conversion layer. These molecules were associated with PMMA in DMF solution and the resulting solution was subjected to electrospinning. Colorful electrospun mats were embedded into PDMS matrix and their free-standing PDMS composite films were used as color conversion layers over blue LED to produce white light such that CRI of 95 and CCT of 4200 K was achieved. These values show that BODIPY-based organic molecules containing fiber composites are promising candidates to be used as color conversion layers for white light applications.Article Citation - WoS: 4Citation - Scopus: 6Testing the Performance of Various Polymeric Antiscalants for Mitigation of Sb-Rich Precipitates Mimicking Stibnite-Based Geothermal Deposits(Hindawi Publishing Corporation, 2020) Çiftçi, Celal; Karaburun, Emre; Tonkul, Serhat; Baba, Alper; Demir, Mustafa Muammer; Yeşilnacar, Mehmet İrfanScaling is frequently observed in geothermal fields and reduces the energy harvesting of power plants. Recently, Sb-rich deposits have developed in many fields around the world. Various polymeric macromolecules have been used as antiscalants to mitigate the formation of scale. Testing potential commercial antiscalants in field conditions is a tedious and costly process. The artificial synthesis of geothermal deposits in the lab is a more practical and economical way to test the performance of antiscalants. This study obtained a Sb-rich deposit by refluxing SbCl3 and Na2S center dot 3H(2)O in 18 h. The product was found to be a mixture of Sb2O3 and Sb2S3. We examined the performance of antiscalants such as poly(ethylene glycol), poly(vinyl pyrrolidone), Gelatin, and poly(vinyl alcohol) of various molecular weights at 5 to 100 ppm. The formation of Sb2S3 is suppressed in the presence of the polymeric antiscalants. The dosage was found to be critical for the solubilization of Sb-rich deposits. Gelatin of 5 ppm showed the highest performance under the conditions employed in this study. While low dosages improve the concentration of [Sb3+], high dosages are required to increase the solubility of [S2-]. Moreover, the amount of deposit is reduced by 12.4% compared to the reference (in the absence of any polymeric molecules). Thus, comparatively, Gelatin shows the most promising performance among the molecules employed.Article Citation - WoS: 3Citation - Scopus: 3Green Fabrication of Lanthanide-Doped Hydroxide-Based Phosphors: Y(oh)(3):eu3+ Nanoparticles for White Light Generation(Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2019) Güner, Tuğrul; Kuş, Anılcan; Özcan, Mehmet; Genç, Aziz; Şahin, Hasan; Demir, Mustafa MuammerPhosphors can serve as color conversion layers to generate white light with varying optical features, including color rendering index (CRI), high correlated color temperature (CCT), and luminous efficacy. However, they are typically produced under harsh synthesis conditions such as high temperature, high pressure, and/or by employing a large amount of solvent. In this work, a facile, water-based, rapid method has been proposed to fabricate lanthanide-doped hydroxide-based phosphors. In this sense, sub-micrometer-sized Y(OH)(3):Eu3+ particles (as red phosphor) were synthesized in water at ambient conditions in <= 60 min reaction time. The doping ratio was controlled from 2.5-20 mol %. Additionally, first principle calculations were performed on Y(OH)(3):Eu3+ to understand the preferable doping scenario and its optoelectronic properties. As an application, these fabricated red phosphors were integrated into a PDMS/YAG:Ce3+ composite and used to generate white light. The resulting white light showed a remarkable improvement (approximate to 24%) in terms of luminous efficiency, a slight reduction of CCT (from 3900 to 3600 K), and an unchanged CRI (approximate to 60) as the amount of Y(OH)(3):Eu3+ was increased.