WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7150

Browse

Search Results

Now showing 1 - 5 of 5
  • Article
    Selective Growth of Fapbbr3 Nanocrystals With Precisely Tailored Optical Properties for Advanced Optoelectronic Applications
    (Amer Chemical Soc, 2025) Guvenc, C. Meric; Polat, Nahit; Arica, Tugce A.; Balci, Sinan
    Understanding the evolution of semiconductor nanocrystals (NCs) during their colloidal synthesis is essential for achieving improved control over their physical and chemical properties. The fast reaction kinetics and concurrent nucleation and growth periods of lead halide perovskite NCs pose significant challenges in controlling the synthesis. Here, we present the room-temperature colloidal synthesis of FAPbBr3 NCs with physically decoupled nucleation and growth periods by using the common oleylamine and oleic acid ligand pair for lead halide perovskite NCs. Importantly, in this method, the nucleation and growth phases are entirely decoupled by halting the reaction at a metastable state, where the FAPbBr3 nuclei are formed. Subsequently, preformed FAPbBr3 nuclei are selectively grown by increasing supersaturation. This is achieved by reducing the monomer solubility through the injection of oleic acid into the solution. Notably, two-dimensional perovskite nanostructures form as intermediate products during the synthesis. Furthermore, the size of the FAPbBr3 NCs is tuned from 5.7 to 13.5 nm by controlling the injected oleic acid amount. Photoluminescence quantum yields of the FAPbBr3 perovskite NCs synthesized by using this method reached up to 95%. These findings demonstrate a robust strategy for the controlled synthesis of FAPbBr3 perovskite NCs, providing precisely tailored optical properties for advanced applications such as solar cells, photodetectors, and light-emitting diodes.
  • Article
    Citation - WoS: 12
    Citation - Scopus: 14
    Laser Assisted Synthesis of Anisotropic Metal Nanocrystals and Strong Light-Matter Coupling in Decahedral Bimetallic Nanocrystals
    (Royal Society of Chemistry, 2021) Mert Balcı, Fadime; Sarısözen, Sema; Polat, Nahit; Güvenç, Çetin Meriç; Karadeniz, Uğur; Tertemiz, Necip Ayhan; Balcı, Sinan
    The advances in colloid chemistry and nanofabrication allowed us to synthesize noble monometallic and bimetallic nanocrystals with tunable optical properties in the visible and near infrared region of the electromagnetic spectrum. In the strong coupling regime, surface plasmon polaritons (SPPs) of metal nanoparticles interact with excitons of quantum dots or organic dyes and plasmon-exciton hybrid states called plexcitons are formed. Until now, various shaped metal nanoparticles such as nanorods, core-shell nanoparticles, hollow nanoparticles, nanoprisms, nanodisks, nanorings, and nanobipyramids have been synthesized to generate plasmon-exciton mixed states. However, in order to boost plasmon-exciton interaction at nanoscale dimensions and expand the application of plexcitonic nanocrystals in a variety of fields such as solar cells, light emitting diodes, and nanolasers, new plexcitonic nanocrystals with outstanding optical and chemical properties remain a key goal and challenge. Here we report laser-assisted synthesis of decahedral shaped noble metal nanocrystals, tuning optical properties of the decahedral shaped nanocrystals by galvanic replacement reactions, colloidal synthesis of bimetallic decahedral shaped plexcitonic nanocrystals, and strong plasmon-plasmon interaction in bimetallic decahedral shaped noble metal nanocrystals near a metal film. We photochemically synthesize decahedral Ag nanoparticles from spherical silver nanoparticles by using a 488 nm laser. The laser assisted synthesis of silver nanoparticles yields decahedral (bicolored) and prism (monocolored) shaped silver nanocrystals. The decahedral shaped nanoparticles were selectively separated from prism shaped nanoparticles by centrifugation. The optical properties of decahedral nanocrystals were tuned by the galvanic replacement reaction between gold ions and silver atoms. Excitons of J-aggregate dyes and SPPs of decahedral bimetallic nanoparticles strongly couple and hence decahedral shaped plexcitonic nanoparticles are prepared. In addition, localized SPPs of decahedral shaped bimetallic nanocrystals interact strongly with the propagating SPPs of a flat silver film and hence new hybrid plasmonic modes (plasmonic nanocavities) are generated. The experimental results are further fully corroborated by theoretical calculations including decahedral shaped plexcitonic nanoparticles and decahedral nanoparticles coupled to flat metal films.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Room Temperature Emission From Single Defects in Wo3 Enhanced by Plasmonic Nanocrystals
    (American Institute of Physics, 2021) Özçeri, Elif; Polat, Nahit; Balcı, Sinan; Tarhan, Enver
    Room temperature light emission from optically active defect centers in two-dimensional layered materials has attracted great interest in recent years owing to the critical applications in the field of quantum information technologies. Therefore, efficient generation, detection, characterization, and manipulation of spatially localized emission from the defect centers are of crucial importance. Here, we report localized, stable, and bright room temperature photoluminescence (PL) emission from defects in WO3. In particular, the experimentally observed polarized and power dependent PL emission shows single photon characteristics. In addition, density functional theory calculations indicate that the source of the emission is most probably oxygen vacancy defects in WO3. The PL emission obtained from the localized defect centers in WO3 at room temperature has been, further, enhanced more than 20 times by using plasmonic gold nanoparticles.
  • Article
    Citation - WoS: 13
    Citation - Scopus: 15
    Hybrid J-aggregate-graphene phototransistor
    (American Chemical Society, 2020) Yakar, Ozan; Balcı, Osman; Uzlu, Burkay; Polat, Nahit; Arı, Ozan; Tunç, İlknur; Balcı, Sinan
    J-aggregates are fantastic self-assembled chromophores with a very narrow and extremely sharp absorbance band in the visible and near-infrared spectrum, and hence they have found many exciting applications in nonlinear optics, sensing, optical devices, photography, and lasing. In silver halide photography, for example, they have enormously improved the spectral sensitivity of photographic process due to their fast and coherent energy migration ability. On the other hand, graphene, consisting of single layer of carbon atoms forming a hexagonal lattice, has a very low absorption coefficient. Inspired by the fact that J-aggregates have carried the role to sense the incident light in silver halide photography, we would like to use Jaggregates to increase spectral sensitivity of graphene in the visible spectrum. Nevertheless, it has been an outstanding challenge to place isolated J-aggregate films on graphene to extensively study interaction between them. We herein noncovalently fabricate isolated J-aggregate thin films on graphene by using a thin film fabrication technique we termed here membrane casting (MC). MC significantly simplifies thin film formation of water-soluble substances on any surface via porous polymer membrane. Therefore, we reversibly modulate the Dirac point of graphene in the J-aggregate/graphene van der Waals (vdW) heterostructure and demonstrate an all-carbon phototransistor gated by visible light. Owing to the hole transfer from excited excitonic thin film to graphene layer, graphene is hole-doped. In addition, spectral and power responses of the all-carbon phototransistor have been measured by using a tunable laser in the visible spectrum. The first integration of J-aggregates with graphene in a transistor structure enables one to reversibly write and erase charge doping in graphene with visible light that paves the way for using J-aggregate/graphene vdW heterostructures in optoelectronic applications.
  • Article
    Citation - WoS: 9
    Citation - Scopus: 9
    Fourier Transform Plasmon Resonance Spectrometer Using Nanoslit-Nanowire Pair
    (American Institute of Physics, 2019) Uulu, Doolos Aibek; Ashirov, Timur; Polat, Nahit; Yakar, Ozan; Balcı, Sinan; Kocabaş, Coşkun
    In this paper, we present a nanoscale Fourier transform spectrometer using a plasmonic interferometer consisting of a tilt subwavelength slit-nanowire pair on a metallic surface fabricated by the focused ion beam microfabrication technique. The incident broadband light strongly couples with the surface plasmons on the gold surface, and thus, surface plasmon polaritons (SPPs) are generated. The launched SPPs interfere with the incident light and generate high contrast interference fringes in the nanoslit. The transmitted SPPs through the metal nanoslit can decouple into free space and are collected by an objective in the far field. The spectroscopic information of the incidence light is obtained by fast Fourier transform of the fringe pattern of the SPPs. In our design, there is no need for a bulky dispersive spectrometer or dispersive optical elements. The dimension of the spectrometer is around 200 mu m length. Our design is based on inherent coherence of the SPP waves propagating through the subwavelength metal nanoslit structures etched into an opaque gold film.