WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
73 results
Search Results
Now showing 1 - 10 of 73
Article Anisotropic Tunability of Vibrational Modes in Black Phosphorus Under Uniaxial Compressive/Tensile Strain(Wiley, 2023) Li, Hao; Kutlu, Tayfun; Carrascoso, Felix; Şahin, Hasan; Munuera, Carmen; Castellanos Gomez, AndresStrain engineering is a powerful strategy for tuning the optical, electrical, vibrational properties of 2D nanomaterials. In this work, a four-point bending apparatus is constructed to apply both compressive and tensile strain on 2D anisotropic black phosphorus flake. Further polarized Raman spectroscopy is used to study the vibrational modes of black phosphorus flakes under uniaxial strain applied along various crystalline orientations. Here, a strong anisotropic blue/redshift of A1g, B2g, and A2g modes is found under compressive/tensile strain, respectively. Interestingly, mode A1g exhibits the maximum/minimum shift while mode B2g and mode A2g present the minimum/maximum shift when the strain is applied along armchair/zigzag direction. Density functional theory calculations are carried out to investigate the anisotropic strain response mechanism, finding that the strain-induced regulation of the PP bond angle, bond length, and especially interlayer interaction has a giant influence on the Raman shift. A four-point bending apparatus is constructed to study the effect of uniaxial strain on the vibrational property of anisotropic black phosphorus. Particularly, strong anisotropy on the Raman blueshift/redshift rate upon compressive/tensile strain can be observed, which results from the strain-induced regulation of the bond angle, bond length, and interlayer interactions according to density functional theory calculation analysis.imageArticle Citation - WoS: 13Citation - Scopus: 15Electronic and Magnetic Properties of Single-Layer Fecl2 With Defects(Amer Physical Soc, 2021) Ceyhan, Eray; Yağmurcukardeş, Mehmet; Peeters, François M.; Şahin, HasanThe formation of lattice defects and their effect on the electronic properties of single-layer FeCl2 are investigated by means of first-principles calculations. Among the vacancy defects, namely mono-, di-, and three-Cl vacancies and mono-Fe vacancy, the formation of mono-Cl vacancy is the most preferable. Comparison of two different antisite defects reveals that the formation of the Fe-antisite defect is energetically preferable to the Cl-antisite defect. While a single Cl vacancy leads to a 1 mu(B) decrease in the total magnetic moment of the host lattice, each Fe vacant site reduces the magnetic moment by 4 mu(B). However, adsorption of an excess Cl atom on the surface changes the electronic structure to a ferromagnetic metal or to a ferromagnetic semiconductor depending on the adsorption site without changing the ferromagnetic state of the host lattice. Both Cl-antisite and Fe-antisite defected domains change the magnetic moment of the host lattice by -1 mu(B) and +3 mu(B), respectively. The electronic ground state of defected structures reveals that (i) single-layer FeCl2 exhibits half-metallicity under the formation of vacancy and Cl-antisite defects; (ii) ferromagnetic metallicity is obtained when a single Cl atom is adsorbed on upper-Cl and Fe sites, respectively; and (iii) ferromagnetic semiconducting behavior is found when a Cl atom is adsorbed on a lower-Cl site or a Fe-antisite defect is formed. Simulated scanning electron microscope images show that atomic-scale identification of defect types is possible from their electronic charge density. Further investigation of the periodically Fe-defected structures reveals that the formation of the single-layer FeCl3 phase, which is a dynamically stable antiferromagnetic semiconductor, is possible. Our comprehensive analysis on defects in single-layer FeCl2 will complement forthcoming experimental observations.Article Citation - WoS: 8Citation - Scopus: 8Strain Tunable Band Structure of a New 2d Carbon Allotrope C-568(IOS Press, 2020) Gao, Qiang; Kang, Jun; Şahin, HasanRecently, C(568)has emerged as a new carbon allotrope, which shows semiconducting properties with a band gap around 1 eV and has attracted much attention. In this work, the external strain effects on the electronic properties of C(568)have been studied theoretically through first-principle calculations. The numerical results show that while in-plane uniaxial and biaxial strains both reduces the band gap of C(568)in case of tensile strain, their effects are quite different in the case of compressive strain. With increasing compressive uniaxial strain, the band gap of C(568)first increases, and then dramatically decreases. In contrast, the application of compressive biaxial strain up to -10% only leads to a slight increase of band gap. Moreover, an indirect-to-direct gap transition can be realized under both types of compressive strain. The results also show that the optical anisotropy of C(568)can be induced under uniaxial strain, while biaxial strain does not cause such an effect. These results indicate good strain tunability of the band structure of C-568, which could be helpful for the design and optimization of C-568-based nanodevices.Article Citation - WoS: 6Citation - Scopus: 6Novel Ultra-Thin Two-Dimensional Structures of Strontium Chloride(Royal Society of Chemistry, 2020) Akyol, Cansu; Başkurt, Mehmet; Şahin, HasanBy performing density functional theory-based calculations, possible stable ultra-thin crystal structures of SrCl(2)are investigated. Phonon calculations reveal that, among the possible crystal structures, three different phases; namely 1H, 1T, and square, are dynamically stable. In addition,ab initiomolecular dynamics calculations show that these three phases are thermally stable up to well above room temperature. Another important stability factor of crystals, the chemical inertness against abundant molecules in the atmosphere, such as N-2, O-2, H2O, and CO2, is also investigated. The analysis shows that SrCl(2)single-layers are chemically stable against these molecules. Moreover, it is determined that in contact with H2O and CO2, ultra-thin SrCl(2)sheets display unique electronic features, allowing them to be used in sensing applications. It is also shown that single layers of SrCl(2)crystals, all having a wide electronic band gap, can form type-I and type-II vertical van der Waals heterostructures with well-known 2D materials such as MoS2, WSe2, and h-BN.Article Citation - WoS: 11Citation - Scopus: 12Prevalence of Oxygen Defects in an In-Plane Anisotropic Transition Metal Dichalcogenide(American Physical Society, 2020) Plumadore, Ryan; Boddison-Chouinard, Justin; Lopinski, Gregory; Modarresi, Mohsen; Potasz, Pawel; Luican-Mayer, Adina; Başkurt, Mehmet; Şahin, HasanAtomic scale defects in semiconductors enable their technological applications and realization of different quantum states. Using scanning tunneling microscopy and spectroscopy complemented by ab initio calculations we determine the nature of defects in the anisotropic van der Waals layered semiconductor ReS2. We demonstrate the in-plane anisotropy of the lattice by directly visualizing chains of rhenium atoms forming diamond-shaped clusters. Using scanning tunneling spectroscopy we measure the semiconducting gap in the density of states. We reveal the presence of lattice defects and by comparison of their topographic and spectroscopic signatures with ab initio calculations we determine their origin as oxygen atoms absorbed at lattice point defect sites. These results provide an atomic-scale view into the semiconducting transition metal dichalcogenides, paving the way toward understanding and engineering their properties.Article Citation - WoS: 20Citation - Scopus: 23Kagome-Like Silicene: a Novel Exotic Form of Two-Dimensional Epitaxial Silicon(Elsevier, 2020) Sassa, Yasmine; Johansson, Fredrik O. L.; Lindblad, Andreas; Yazdi, Milad G.; Simonov, Konstantin; Weissenrieder, Jonas; Le Lay, Guy; İyikanat, Fadıl; Şahin, HasanSince the discovery of graphene, intensive efforts have been made in search of novel two-dimensional (2D) materials. Decreasing the materials dimensionality to their ultimate thinness is a promising route to unveil new physical phenomena, and potentially improve the performance of devices. Among recent 2D materials, analogs of graphene, the group IV elements have attracted much attention for their unexpected and tunable physical properties. Depending on the growth conditions and substrates, several structures of silicene, germanene, and stanene can be formed. Here, we report the synthesis of a Kagome-like lattice of silicene on aluminum (1 1 1) substrates. We provide evidence of such an exotic 2D Si allotrope through scanning tunneling microscopy (STM) observations, high-resolution core-level (CL) and angle-resolved photoelectron spectroscopy (ARPES) measurements, along with Density Functional Theory calculations.Article Citation - WoS: 3Citation - Scopus: 3Green Fabrication of Lanthanide-Doped Hydroxide-Based Phosphors: Y(oh)(3):eu3+ Nanoparticles for White Light Generation(Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2019) Güner, Tuğrul; Kuş, Anılcan; Özcan, Mehmet; Genç, Aziz; Şahin, Hasan; Demir, Mustafa MuammerPhosphors can serve as color conversion layers to generate white light with varying optical features, including color rendering index (CRI), high correlated color temperature (CCT), and luminous efficacy. However, they are typically produced under harsh synthesis conditions such as high temperature, high pressure, and/or by employing a large amount of solvent. In this work, a facile, water-based, rapid method has been proposed to fabricate lanthanide-doped hydroxide-based phosphors. In this sense, sub-micrometer-sized Y(OH)(3):Eu3+ particles (as red phosphor) were synthesized in water at ambient conditions in <= 60 min reaction time. The doping ratio was controlled from 2.5-20 mol %. Additionally, first principle calculations were performed on Y(OH)(3):Eu3+ to understand the preferable doping scenario and its optoelectronic properties. As an application, these fabricated red phosphors were integrated into a PDMS/YAG:Ce3+ composite and used to generate white light. The resulting white light showed a remarkable improvement (approximate to 24%) in terms of luminous efficiency, a slight reduction of CCT (from 3900 to 3600 K), and an unchanged CRI (approximate to 60) as the amount of Y(OH)(3):Eu3+ was increased.Article Citation - WoS: 4Citation - Scopus: 4Color-Tunable All-Inorganic Cspbbr3 Perovskites Nanoplatelet Films for Photovoltaic Devices(American Chemical Society, 2019) Özcan, Mehmet; Özen, Sercan; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, HasanHerein, we demonstrate a novel coating approach to fabricate CsPbBr3 perovskite nanoplatelet film with heat-free process via electrospraying from precursor solution. A detailed study is carried out to determine the effect of various parameters such as ligand concentration, electric field, flow rate, etc. on the optical properties. By controlling the volume ratios of the oleylamine (OAm) and oleic acid (OA), the coalescing and thickness of the resulting nanoplatelets can be readily tuned that results in control over emission in the range of 100 nm without any antisolvent crystallization or heating processes. The varying electrical field and flow rate was found as inefficient on the emission characteristics of the films. In addition, the crystal films were obtained under ambient conditions on the ITO coated glass surfaces as in the desired pattern. As a result, we demonstrated a facile and reproducible way of synthesizing and coating of CsPbBr3 perovskite nanoplatelets which is suitable for large-scale production. In this method, the ability of tuning the degree of quantum confinement for perovskite nanoplatelets is promising approach for the one-step fabrication of crystal films that may enable the use in optoelectronics.Article Citation - WoS: 24Citation - Scopus: 24Defect Tolerant and Dimension Dependent Ferromagnetism in Mnse2(Royal Society of Chemistry, 2019) Eren, İsmail; İyikanat, Fadıl; Şahin, HasanBy performing density functional theory-based calculations, we investigate the structural, vibrational, electronic and magnetic properties of 2D monolayers, nanoribbons and quantum dots of MnSe2. Vibrational spectrum analysis reveals the dynamical stability of not only ferromagnetic but also antiferromagnetic phases of single layer MnSe2 crystal structures. Electronically, calculations show that 1T-MnSe2 is a ferromagnetic structure displaying metallic behavior. It is also found that the structure preserves its dynamical stability and metallic behavior even under the presence of high density Se vacancies. Moreover, it was predicted that, differing from the 2D MnSe2, metal-metal interaction driven reconstructions result in ferromagnetic-to-antiferromagnetic crossover in the ground state of nanoribbons and quantum dots. With its robust ferromagnetic metallic character in the 2D ultra-thin limit and dimension-dependent magnetic properties, MnSe2 is an important candidate for spintronic device applications.Article Citation - WoS: 30Citation - Scopus: 29Stacking-Dependent Excitonic Properties of Bilayer Blue Phosphorene(American Physical Society, 2019) İyikanat, Fadıl; Torun, Engin; Senger, Ramazan Tuğrul; Şahin, HasanAb initio calculations in the framework of many-body perturbation theory (MBPT) are performed to calculate the electronic and optical properties of monolayer and bilayer blue phosphorene with different stacking configurations. It is found that the stacking configuration of bilayer blue phosphorene strongly affects the electronic band gap of the material. By solving the Bethe-Salpeter equation (BSE) on top of the G(0)W(0) calculation, the binding energies, spectral positions, and band decomposition of excitons of monolayer and bilayer configurations are investigated. The most prominent two excitonic peaks of bilayers are examined in detail. Our calculations show that different stacking configurations lead to distinct interlayer interaction characteristics which lead to substantial change in the optical spectrum of bilayer blue phosphorene. Mostly intralayer and mixed interlayer excitons with quite high binding energies are obtained in bilayer blue phosphorene. Our results show that excitonic properties of ultrathin materials play an important role in tuning and improving the optoelectronic performance of two-dimensional materials.