WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7150

Browse

Search Results

Now showing 1 - 9 of 9
  • Data Paper
    Citation - WoS: 15
    Citation - Scopus: 20
    Database Covering the Prayer Movements Which Were Not Available Previously
    (Nature Publishing Group, 2023) Mihçin, Şenay; Şahin, Ahmet Mert; Yılmaz, Mehmet; Alpkaya, Alican Tuncay; Tuna, Merve; Akdeniz, Sevinç; Can, Nuray Korkmaz; Tosun, Aliye; Şahin, Serap
    Lower body implants are designed according to the boundary conditions of gait data and tested against. However, due to diversity in cultural backgrounds, religious rituals might cause different ranges of motion and different loading patterns. Especially in the Eastern part of the world, diverse Activities of Daily Living (ADL) consist of salat, yoga rituals, and different style sitting postures. A database covering these diverse activities of the Eastern world is non-existent. This study focuses on data collection protocol and the creation of an online database of previously excluded ADL activities, targeting 200 healthy subjects via Qualisys and IMU motion capture systems, and force plates, from West and Middle East Asian populations with a special focus on the lower body joints. The current version of the database covers 50 volunteers for 13 different activities. The tasks are defined and listed in a table to create a database to search based on age, gender, BMI, type of activity, and motion capture system. The collected data is to be used for designing implants to allow these sorts of activities to be performed.
  • Article
    Citation - WoS: 14
    Citation - Scopus: 15
    Investigation of the Effect of Gel Properties on Supercritical Drying Kinetics of Ionotropic Alginate Gel Particles
    (Elsevier, 2019) Şahin, İbrahim; Uzunlar, Erdal; Erkey, Can
    A series of spherical ionotropic alginate gel particles with different diameters ranging from 2.8mm to 5.0mm and porosities ranging from 0.899 to 0.976 were prepared by dripping a Na-alginate solution into a solution of salts of divalent cations (Ca2+, Mn2+, Ni2+, Co2+, Cu2+ and Zn2+). After solvent exchange with ethanol, kinetics of supercritical drying of these ionotropic alginate gel particles in a packed bed was investigated at 308-338 K and 100-120 bar. Experimental data were compared with predictions of a model which considers diffusive transport inside the pores and convection in the flowing fluid stream. The model predicted drying profiles by taking into account only the changes in porosity and diameter of the gel particles. A convective mass transfer coefficient correlation that was originally developed for supercritical drying of Ca-alginate gel particles was found to be suitable for M-alginate gel particles. (C) 2019 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 23
    Citation - Scopus: 24
    Investigation of Kinetics of Supercritical Drying of Alginate Alcogel Particles
    (Elsevier Ltd., 2019) Şahin, İbrahim; Uzunlar, Erdal; Erkey, Can
    Spherical calcium alginate gel particles were synthesized by dripping method. The effects of temperature, pressure, particle size and CO2 flow rate on kinetics of supercritical drying of alginate gel particles in a packed bed were investigated. Increase in CO2 flow rate, increase in temperature and decrease in particle size increased the drying rate and decreased the drying time. A mathematical model based on (i) the diffusion of the solvent inside the pores of gel particles, (ii) external mass transfer of the solvent from the surface of the gel particles into the flowing fluid stream, and (iii) convection and axial dispersion of the solvent in the flowing fluid stream was developed. A correlation for predicting external mass transfer coefficients for supercritical drying of alcogel particles was developed by fitting the model to experimental data. A good agreement between the experimental data and model results was achieved using the developed correlation.
  • Article
    Citation - WoS: 13
    Citation - Scopus: 17
    Effect of Ultrasound on the Kinetics of Cation Exchange in Nax Zeolite
    (Elsevier Ltd., 2012) Erten Kaya, Yasemin; Çakıcıoğlu Özkan, Fehime
    In this study, we focused on the effect of ultrasound on ion exchange kinetics to obtain the Li-, Ca- and Ce-rich NaX zeolite. The results were compared to those obtained from the traditional batch exchange method under similar conditions. Contact time and initial cation concentration (fold equivalent excess) were studied. Ultrasound enhanced the replacement of Na + ion with Li +, Ca 2+ and Ce 3+ ions in the extra-framework of zeolite up to 76%, 72% and 66%, respectively. The intraparticle diffusion is the rate limiting step in the ion exchange for both exchange methods. As compared to the traditional exchange method, the ultrasonic method applied in this study was found to be very effective on the exchange amount at equilibrium.
  • Article
    Citation - WoS: 19
    Citation - Scopus: 20
    Isothermal Crystallization Kinetics and Mechanical Properties of Polycaprolactone Composites With Zinc Oxide, Oleic Acid, and Glycerol Monooleate
    (John Wiley and Sons Inc., 2013) Alp, Burcu; Cesur, Serap
    The isothermal crystallization and mechanical behavior of polycaprolactone (PCL) with zinc oxide (ZnO) with oleic acid and glycerol monooleate (GMO) were studied. Theoretical melting points calculated by the Flory-Huggins and Thompson-Gibbs models were thoroughly compared with differential scanning calorimetry experimental observations. The isothermal crystallization kinetic parameters by Avrami analysis showed that crystallization was controlled by nucleation, crystal growth was spherical, and the nucleation type changed between thermal and athermal nucleation. X-ray diffraction showed that when the additives were used together both the crystal thickness and the degree of crystallinity increased. A multiple-response regression analysis was made with the ZnO, oleic acid, and GMO concentrations as variables and the crystallinity as output. Interaction parameters by the Pukanzky model were calculated from the tensile strength at the yield point and indicated that the addition of oleic acid or GMO improved the interface between the ZnO particles and PCL.
  • Article
    Citation - WoS: 21
    Citation - Scopus: 23
    Adsorption of Methylene Blue From Aqueous Solution on High Lime Fly Ash: Kinetic, Equilibrium, and Thermodynamic Studies
    (Taylor and Francis Ltd., 2012) Keleşoğlu, Serkan; Kes, Mürşide; Sütçü, Leman; Polat, Hürriyet
    Kinetic, equilibrium, and thermodynamic studies were performed for the batch adsorption of methylene blue (MB) on the high lime fly ash as a low cost adsorbent material. The studied operating variables were adsorbent amount, contact time, dye concentration, and temperature. The kinetic data were analyzed using the pseudo-first order and pseudo-second order kinetic models and the adsorption kinetic was followed well by the pseudo-second order kinetic model. The equilibrium data were fitted with the Freundlich, Langmuir, and Dubinin Radushkevich (D-R) isotherms and the equilibrium data were found to be well represented by the Freundlich and D-R isotherms. Based on these two isotherms MB is taken by chemical ion exchange and active sites on the high lime fly ash have different affinities to MB molecules. Various thermodynamic parameters such as enthalpy of adsorption (ΔH°), free energy change (ΔG°), and entropy change (ΔS°) were investigated. The positive value of ΔH° and negative value of ΔG° indicate that the adsorption is endothermic and spontaneous. The positive value of ΔS° shows the increased randomness at the solid-liquid interface during the adsorption. A single-stage batch adsorber was also designed based on the Freundlich isotherm for the removal of MB by the high lime fly ash. © 2012 Copyright Taylor and Francis Group, LLC.
  • Article
    Citation - WoS: 12
    Citation - Scopus: 13
    Statistical Thermal Stability of Pvc
    (John Wiley and Sons Inc., 2010) Atakul Savrık, Sevdiye; Cansever Erdoğan, Beyhan; Balköse, Devrim; Ülkü, Semra
    Experimental design was used to optimize the processing parameters for the decomposition of poly (vinyl chloride). Factorial design and face centered composite design (FCC) were applied to determine the optimum conditions. A total of 10 g PVC powder was mixed with different amounts of zinc stearate (ZnSt 2) and natural zeolite and tested for thermal stability. Factorial fitted model was explained by first order pattern due to the significant main effect regression constants, and FCC model was described by second order model owing to higher order polynomial coefficients. FCC design was superior to factorial design as FCC considers not only its pure quadratic effects contribution but also its higher overall desirability for thermal stability of PVC. For factorial design the optimum conditions were determined as 163.06 mg for ZnSt2, 399.99 mg for zeolite, and 140°C for temperature with desirability of 0.933. However, 400 mg for ZnSt2, 333.24 mg for zeolite, and 140°C for temperature with desirability of 0.956 were obtained as the optimum conditions by FCC design. © 2010 Wiley Periodicals, Inc.
  • Article
    Citation - WoS: 1
    Citation - Scopus: 2
    Kinetic Estimation of the Adsorbate Distribution on the Surface From Adsorbed Amounts
    (Elsevier Ltd., 2006) Polat, Mehmet
    A phenomenological multilayer adsorption model for a well-dispersed, homogeneous, nonporous adsorbent and a molecular adsorbate is presented. The model provides explicit kinetic expressions associating the adsorbed amounts to the fraction of the surface occupied and reduces to the first- and second-order adsorption models for special cases. Parameters of the model are a pair of true rate constants related to the adsorbate-adsorbent and adsorbate-surface adsorbate affinities. A general graphical procedure and analytical equations for special cases are provided to estimate the rate constants from kinetic adsorption data. Data from the adsorption of sodium stearate onto α-alumina from water were used to test the model. The predicted values of the rate constants suggested that the stearate was distributed homogeneously on the alumina surface and essentially adsorbed as a monolayer before starting to form the second layer.
  • Article
    Citation - WoS: 38
    Citation - Scopus: 43
    Degradation Kinetics of Anthocyanins From Sour Cherry, Pomegranate, and Strawberry Juices by Hydrogen Peroxide
    (John Wiley and Sons Inc., 2002) Özkan, Mehmet; Yemenicioğlu, Ahmet; Asefi, N.; Cemeroglu, Bekir
    Degradations were studied at different hydrogen peroxide (H2O2] concentrations (9.31 to 27.92 mmol. L-1] over a range of 10 ° to 30 °C. Degradation of anthocyanins by H2O2 was described by first-order function. Comparison of t1/2 values revealed that sour cherry anthocyanins were the most resistant to H2O2, followed by pomegranate and strawberry anthocyanins. Thus, the removal of residual H2O2 from the juice contact surfaces of aseptically packaged strawberry juices should be controlled more carefully to prevent anthocyanin degradation. Respective Ea values were between 9.4 to 11.1, 9.5 to 11.4, and 11.4 to 12.2 kcal.mol-1; and Q10 values between 1.59 to 2.22, 1.62 to 2.05, and 1.76 to 2.36 for strawberry, sour cherry, and pomegranate anthocyanins.