WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
10 results
Search Results
Now showing 1 - 10 of 10
Article Citation - WoS: 3Citation - Scopus: 4A Facile Method for Boosting the Graphitic Carbon Nitride's Photocatalytic Activity Based on 0d/2d S-Scheme Heterojunction Nanocomposite Architecture(Elsevier, 2024) Kahraman, Zeynep; Kartal, Uğur; Gent, Aziz; Alp, EmreGraphitic carbon nitride (g-C 3 N 4 ) has received significant interest as a metal -free photocatalyst. The S -scheme photocatalytic system has great potential to improve the charge separation in semiconductor photocatalysts. In this study, we have fabricated non-toxic and low-cost photocatalytic nanocomposites of 0D/2D S -scheme heterojunction composed of iron oxide and graphitic carbon nitride by a facile method. The developed facile method provides a sustainable way with a high atom economy to further enhance the photocatalytic performance of exfoliated g-C 3 N 4 . The 0D -iron oxide/2D-C 3 N 4 exhibited nearly 10 times better than bulk g-C 3 N 4 and almost 60 % better than exfoliated g-C 3 N 4 under simulated solar light irradiation. The experimental results demonstrated that the effective charge -carrier mechanism led to an improved generation of reactive oxygen species (ROSs), resulting in an impressive photocatalytic performance. A serial photocatalytic test was also conducted to understand photocatalytic reaction mechanisms with various scavengers.Article Citation - WoS: 5Citation - Scopus: 4Influence of Partitioning Treatment on Microstructure and Mechanical Properties of an Alloyed Ductile Iron Austempered at Different Temperatures(Walter de Gruyter GmbH, 2023) Neite, Maximilian; Münstermann, Sebastian; Nalçacı, Burak; Davut, Kemal; Erdoğan, MehmetThe present study was conducted to uncover effects of partitioning treatment on Cu-Ni-Mo alloyed ductile iron (DI) austempered at different temperatures. For this purpose, the DI samples, produced via sand casting, were austenitized at 900 °C for 60 min, followed by austempering at the temperatures of 275-325-375 °C for 120 min and afterwards a partitioning treatment was applied at 200 °C for 15 min. In the characterization studies, dilatometer, image analysis, JMat-Pro, mechanical tests, XRD, optical microscope, and scanning electron microscope (SEM) equipped with EBSD detector were utilized. Characterization studies showed that the effects of partitioning treatment were directly correlated with austempering temperature and high carbon austenite volume fraction changed in the range of 19.48-35.45%. That redistribution of carbon (C) between bainitic ferrite and high carbon austenite occurred, in turn, the carbon content of high carbon austenite increased with the partitioning treatment irrespective of austempering temperature were uncovered. Furthermore, the partitioning treatment considerably changed the grain morphologies of both high carbon austenite and banitic ferrite. As a consequence of these microstructural differences, the highest tensile strength of 1489.2 MPa was established in the sample austempered at 275 °C and partitioned at 200 °C, whereas the highest ductility of 5.61% acquired at the austempering temperature of 375 °C. © 2023 Walter de Gruyter GmbH, Berlin/Boston.Article Citation - WoS: 3Citation - Scopus: 3Nondestructive Microstructural Characterization of Austempered Ductile Iron(Walter de Gruyter GmbH, 2023) Tüzün, Mert Yağız; Yalçın, Mustafa Alp; Davut, Kemal; Kılıçlı, VolkanAustempered ductile iron (ADI) has been preferred in a wide range of applications due its unique combination of high strength, good ductility, wear resistance and fracture toughness together with lower cost and lower density compared to steels. Magnetic Barkhausen noise (MBN) measurement offers a better alternative to traditional characterization techniques by being fast and non-destructive. A simple linear regression using only one single independent variable cannot correlate the MBN with the microstructure of ADI, since its microstructure is multi component. Multiple linear regression analysis (MLRA) was used to build a model that uses the characteristic features of microstructural constituents as input parameters to predict the MBN. For that purpose, Cu-Ni-Mo alloyed ductile iron samples austempered between 325 and 400 degrees C and for 45-180 min duration were used. The results show that MBN is most sensitive to the size and shape of acicular ferrite and retained austenite. Moreover, MBN is almost insensitive to the size, morphology and volume fraction of graphite particles. This indicates that retained austenite pins the domain walls more effectively than the graphite particles. Considering the results MLRA, MBN technique can be used to characterize the ausferritic microstructure of ADI.Article Citation - WoS: 2The Effect of the Temperature of Heat Treatment Process and the Concentration and Duration of Acid Leaching on the Size and Crystallinity of Nano-Silica Powders Formed by the Dissociation of Natural Diatom Frustule(American Scientific Publishers, 2022) Ülker, Sevkan; Güden, MustafaThe present study focused on the processing of nano-silica powders in varying sizes and crystallinities through IP: 846247.10 On: Wed, 14 Dec 2022 07:29:25 heat treatment (900-1200 degrees C), hydrofluoric acid leaching (1-7 N), and ball milling (1 h, 500 rpm) of natural Copyright American Scentfic P blishers diatom frustules. The starting natural frustules were determined to be composed of amorphous silica (88%) Delivered by Ingenta and quartz. The partially ordered crystalline low-quartz and or precursor to low-cristobalite started to form at-900 degrees C. As the heat treatment temperature increased, the crystallinity of the frustules increased from 9.3% at 25 degrees C to 46% at 1200 degrees C. Applying a ball milling reduced the mean particle sizes of the as-received and heat-treated frustules from 15.6-13.7 mu m to 7.2-6.7 mu m, respectively. Acid leaching of the as-received and heat-treated frustules resulted in a further increase in the crystallinity. Furthermore, a ball milling applied after an acid leaching was very effective in reducing the particle size of the as-received and heat-treated frustules. The mean particle size of the acid-leached frustules decreased to 774-547 nm with a crystallinity varying between 12 and 48% after ball milling. A partially dissolved amorphous phase was observed in between crystalline silica grains after acid leaching, which resulted in a rapid fracture/separation of the frustules in ball milling.Article Citation - WoS: 3Citation - Scopus: 5Physically Unclonable Security Patterns Created by Electrospinning, and Authenticated by Two-Step Validation Method(IOP Publishing, 2022) Taşcıoğlu, Didem; Atçı, Arda; Sevim Ünlütürk, Seçil; Özçelik, SerdarCounterfeiting is a growing economic and social problem. For anticounterfeiting, random and inimitable droplet/fiber patterns were created by the electrospinning method as security tags that are detectable under UV light but invisible in daylight. To check the authenticity of the original security patterns created; images were collected with a simple smartphone microscope and a database of the recorded original patterns was created. The originality of the random patterns was checked by comparing them with the patterns recorded in the database. In addition, the spectral signature of the patterns in the droplet/fiber network was obtained with a simple and hand-held spectrometer. Thus, by reading the spectral signature from the pattern, the spectral information of the photoluminescent nanoparticles was verified and thus a second-step verification was established. In this way, anticounterfeiting technology that combines ink formula, unclonable security pattern creation and two-level verification is developed.Article Citation - WoS: 2Citation - Scopus: 2Mn2+ Ions Incorporated Into Znsxse1-X Colloidal Quantum Dots: Controlling Size and Composition of Nanoalloys and Regulating Magnetic Dipolar Interactions(IOP Publishing, 2021) Ünlütürk, Seçil Sevim; Akdoğan, Yaşar; Özçelik, SerdarA facile synthesis method is introduced how to prepare magnetically active ultraviolet emitting manganese ions incorporated into ZnSxSe1-x colloidal quantum dot (nanoalloy) at 110 degrees C in aqueous solutions. The reaction time is the main factor to control the hydrodynamic size from 3 to 10 nm and the precursor ratio is significant to tune the alloy composition. ZnS shell layer on the ZnSxSe1-x core was grown to passivate environmental effects. The nanoalloy has ultraviolet emission at 380 nm having a lifetime of 80 ns and 7% quantum yield. The incorporation of Mn2+ ions into the nanoalloys induced magnetic activity but did not modify the structure and photophysical properties of the nanoalloys. Colloidal and powdery samples were prepared and analyzed by electron paramagnetic resonance (EPR) spectroscopy. In the colloidal dispersions, EPR spectra showed hyperfine line splitting regardless of the Mn2+ ion fractions, up to 6%, indicating that Mn2+ ions incorporated into the nanoalloys were isolated. EPR signals of the powdery samples were broadened when the fraction of Mn2+ ions was higher than 0.1%. The EPR spectra were simulated to reveal the locations and interactions of Mn2+ ions. The simulations suggest that the Mn2+ ions are located on the nanoalloy surfaces. These findings infer that the magnetic dipolar interactions are regulated by the initial mole ratio of Mn/Zn and the physical state of the nanoalloys adjusted by preparation methods.Article Citation - WoS: 1Interfacial Properties of Aluminum/Glass-fiber Reinforced Polypropylene Sandwich Composites(Springer Verlag, 2013) Baştürk, S. B.; Guruşçu, A.; Tanoğlu, MetinAluminum/glass-fiber-reinforced polypropylene (Al/GFPP) laminates were manufactured by using various surface pretreatment techniques. Adhesion at the composite/metal interface was achieved by a surface pretreatment of Al sheets with amino-based silane coupling agents, incorporation of a polyolefin-based adhesive film and modification with a PP-based film containing 20 wt.% of maleic-anhydride-modified polypropylene (PP-g-MA). In order to increase the effect of bonding between components of the laminates, the combination of silane treatment and the addition of the PP-based film was also investigated. The mechanical properties (shear, peel, and bending strengths) of adhesively bonded Al/GFPP laminates were examined to evaluate the effects of the surface treatments mentioned. It was revealed that the adhesion in the laminated Al/GFPP systems could be improved by the treatment of aluminum surface with an amino-based silane coupling agent. Judging from the results of peel and bending strength, with incorporation of polyolefin-based films, adhesion in the Al/GFPP laminates increased significantly. The modification of Al/GFPP interfaces with a PP-g-MA/PP layer led to the highest improvement in their adhesion properties. The combination of surface modification with silane and addition of PP-based films did not yield the high bending strength desired. This may be due to the insufficient bonding between silane groups and PP-based films.Conference Object X-Ray Fluorescence Spectroscopic Determination of Heavy Metal and Trace Element Concentrations of Origanum Sipyleum From Turkey(Georg Thieme Verlag, 2015) Erdoğan, T. F.; Gönenç, T. M.; Kayalar, H.; Durmuşkahya, Cenk; Hortooğlu, Zehra Sinem; Toktaş, Ümit; Boyalı, F.[No abstract available]Article Citation - WoS: 23Citation - Scopus: 23Cold Sintering of Soda-Lime Glass(Elsevier Ltd., 2021) Karacasulu, Levent; Ögür, Ezgi; Pişkin, Cerem; Vakıfahmetoğlu, ÇekdarOrdinary recycled soda lime glass powder was densified via cold sintering process with the aid of concentrated NaOH solution. Increase in processing time, temperature and concentration of the NaOH solution resulted in the formation of monolithic glass artifacts with higher relative densities. The sample densified the most (95.2%) was obtained when the sintering was performed at 250˚C with a 20 min dwell time using 15 M NaOH solution.Article Citation - WoS: 18Citation - Scopus: 46Phosphor-Based White Led by Various Glassy Particles:control Over Luminous Efficiency(The Optical Society, 2019) Yüce, Hürriyet; Güner, Tuğrul; Balcı, Sinan; Demir, Mustafa MuammerGenerating white light through a mainstream remote phosphor design suffers from phosphor conversion efficiency loss due to a backscattering of light. Such a loss also reduces luminous efficiency of the resulting white light. To overcome this issue, various glassy scatterers with different morphologies such as glass bubbles, glass beads, and nanosized silica particles were employed as scatterers, together with a fixed amount of yellow phosphor (YAG:Ce3+) and a poly(dimethylsiloxane) (PDMS) matrix. In addition, the simulation of the system validates the rigorous multiple scattering of the incoming light most probably due to refractive index mismatch between the glass bubbles and surrounding PDMS matrix along with the internal reflections. (C) 2019 Optical Society of America