WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
19 results
Search Results
Now showing 1 - 10 of 19
Article Citation - WoS: 4Citation - Scopus: 4A New Numerical Algorithm Based on Quintic B-Spline and Adaptive Time Integrator for Cou- Pled Burger's Equation(Tabriz University, 2023) Çiçek, Yeşim; Gücüyenen Kaymak, Nurcan; Bahar, Ersin; Gürarslan, Gürhan; Tanoğlu, GamzeIn this article, the coupled Burger's equation which is one of the known systems of the nonlinear parabolic partial differential equations is studied. The method presented here is based on a combination of the quintic B-spline and a high order time integration scheme known as adaptive Runge-Kutta method. First of all, the application of the new algorithm on the coupled Burger's equation is presented. Then, the convergence of the algorithm is studied in a theorem. Finally, to test the efficiency of the new method, coupled Burger's equations in literature are studied. We observed that the presented method has better accuracy and efficiency compared to the other methods in the literature. © 2023 University of Tabriz. All Rights Reserved.Article Citation - WoS: 9Citation - Scopus: 8Taylor Wavelets Collocation Technique for Solving Fractional Nonlinear Singular Pdes(Springer, 2022) Aghazadeh, Nasser; Mohammadi, Amir; Tanoğlu, GamzeA novel technique has been introduced to solve the Emden-Fowler equations. It has been derived from the Taylor wavelets collocation method. The proposed scheme has been successfully implemented in order to solve the singular equations. The singular problem converts to a system of algebraic equations that can be solved numerically. Moreover, the technique is very effective to remove the strong singularity point at x = 0. The numerical experiments have been checked out with the exact and approximate solutions that have been achieved by others including the Adomian decomposition method (Wazwaz in Appl Math Comput 166:638-651, 2005), Modified Homotopy Perturbation Method (Singh et al. J Math Chem 54(4):918-931, 2016). Also, the error analysis of the technique has been considered.Article A Reliable and Fast Mesh-Free Solver for the Telegraph Equation(Springer, 2022) İmamoğlu Karabaş, Neslişah; Korkut, Sıla Övgü; Gürarslan, Gürhan; Tanoğlu, GamzeIn the presented study, the hyperbolic telegraph equation is taken as the focus point. To solve such an equation, an accurate, reliable, and efficient method has been proposed. The developed method is mainly based on the combination of a kind of mesh-free method and an adaptive method. Multiquadric radial basis function mesh-free method is considered on spatial domain and the adaptive fifth-order Runge–Kutta method is used on time domain. The validity and the performance of the proposed method have been checked on several test problems. The approximate solutions are compared with the exact solution, it is shown that the proposed method has more preferable to the other methods in the literature.Article Citation - WoS: 1Citation - Scopus: 1Fatigue Life Prediction and Optimization of Gfrp Composites Based on Failure Tensor Polynomial in Fatigue Model With Exponential Fitting Approach(SAGE Publications, 2022) Güneş, Mehmet Deniz; İmamoğlu Karabaş, Neslişah; Deveci, Hamza Arda; Tanoğlu, Gamze; Tanoğlu, MetinIn this study, a new fatigue life prediction and optimization strategy utilizing the Failure Tensor Polynomial in Fatigue (FTPF) model with exponential fitting and numerical bisection method for fiber reinforced polymer composites has been proposed. Within the experimental stage, glass/epoxy composite laminates with (Formula presented.), (Formula presented.), and (Formula presented.) lay-up configurations were fabricated, quasi-static and fatigue mechanical behavior of GFRP composites was characterized to be used in the FTPF model. The prediction capability of the FTPF model was tested based on the experimental data obtained for multidirectional laminates of various composite materials. Fatigue life prediction results of the glass/epoxy laminates were found to be better as compared to those for the linear fitting predictions. The results also indicated that the approach with exponential fitting provides better fatigue life predictions as compared to those obtained by linear fitting, especially for glass/epoxy laminates. Moreover, an optimization study using the proposed methodology for fatigue life advancement of the glass/epoxy laminates was performed by a powerful hybrid algorithm, PSA/GPSA. So, two optimization scenarios including various loading configurations were considered. The optimization results exhibited that the optimized stacking sequences having maximized fatigue life can be obtained in various loading cases. It was also revealed that the tension-compression loading and the loadings involving shear loads are critical for fatigue, and further improvement in fatigue life may be achieved by designing only symmetric lay-ups instead of symmetric-balanced and diversification of fiber angles to be used in the optimization.Article Citation - WoS: 10Citation - Scopus: 12An Efficient Approach for Solving Nonlinear Multidimensional Schrodinger Equations(Elsevier, 2021) İmamoğlu Karabaş, Neslişah; Korkut, Sıla Övgü; Tanoğlu, Gamze; Aziz, Imran; Siraj-ul-IslamAn efficient numerical method is proposed for the solution of the nonlinear cubic Schrodinger equation. The proposed method is based on the Frechet derivative and the meshless method with radial basis functions. An important characteristic of the method is that it can be extended from one-dimensional problems to multi-dimensional ones easily. By using the Frechet derivative and Newton-Raphson technique, the nonlinear equation is converted into a set of linear algebraic equations which are solved iteratively. Numerical examples reveal that the proposed method is efficient and reliable with respect to the accuracy and stability.Article Citation - WoS: 8Operator-Splitting Methods Via the Zassenhaus Product Formula(Elsevier Ltd., 2011) Geiser, Juergen; Tanoğlu, GamzeIn this paper, we contribute an operator-splitting method improved by the Zassenhaus product. Zassenhaus products are of fundamental importance for the theory of Lie groups and Lie algebras. While their applications in physics and physical chemistry are important, novel applications in CFD (computational fluid dynamics) arose based on the fact that their sparse matrices can be seen as generators of an underlying Lie algebra. We apply this to classical splitting and the novel Zassenhaus product formula. The underlying analysis for obtaining higher order operator-splitting methods based on the Zassenhaus product is presented. The benefits of dealing with sparse matrices, given by spatial discretization of the underlying partial differential equations, are due to the fact that the higher order commutators are very quickly computable (their matrix structures thin out and become nilpotent). When applying these methods to convection-diffusion-reaction equations, the benefits of balancing time and spatial scales can be used to accelerate these methods and take into account these sparse matrix structures. The verification of the improved splitting methods is done with numerical examples. Finally, we conclude with higher order operator-splitting methods. (C) 2010 Elsevier Inc. All rights reserved.Conference Object The Hirota Method for Reaction-Diffusion Equations With Three Distinct Roots(American Institute of Physics, 2004) Tanoğlu, Gamze; Pashaev, OktayThe Hirota Method, with modified background is applied to construct exact analytical solutions of nonlinear reaction-diffusion equations of two types. The first equation has only nonlinear reaction part, while the second one has in addition the nonlinear transport term. For both cases, the reaction part has the form of the third order polynomial with three distinct roots. We found analytic one-soliton solutions and the relationships between three simple roots and the wave speed of the soliton. For the first case, if one of the roots is the mean value of other two roots, the soliton is static.We show that the restriction on three distinct roots to obtain moving soliton is removed in the second case by, adding nonlinear transport term to the first equation.Article An Operator Splitting Approximation Combined With the Supg Method for Transport Equations With Nonlinear Reaction Term(Tech Science Press, 2012) Baysal, Onur; Tanoğlu, GamzeIn this work, an operator splitting method is proposed in order to obtain a stable numerical solution for transport equation with non-linear reaction term. We split the transport equation into a reaction part and an advection diffusion part. The former one which becomes a nonlinear ordinary differential equation can be approximated by the simple higher order integrator or solved exactly. The later one is approximated by the Streamline-Upwind Petrov-Galerkin (SUPG) method combined with the generalized Euler time integration (q-method). Numerical results that illustrate the good performance of this method are reported.Article Citation - WoS: 3Citation - Scopus: 3A1-L10 Phase Boundaries and Anisotropy Via Multiple-Order Theory for an Fcc Alloy(European Mathematical Society Publishing House, 2003) Tanoğlu, Gamze; Braun, Richard J.; Cahn, John W.; McFadden, Geoffrey B.The dependence of thermodynamic properties of planar interphase boundaries (IPBs) and antiphase boundaries (APBs) in a binary alloy on an fcc lattice is studied as a function of their orientation. Using a recently developed diffuse interface model based on three non-conserved order parameters and the concentration, and a free energy density that gives a realistic phase diagram with one disordered phase (A1) and two ordered phases (L12 and L10) such as occur in the Cu-Au system, we are able to find IPBs and APBs between any pair of phases and domains, and for all orientations. The model includes bulk and gradient terms in a free energy functional, and assumes that there is no mismatch in the lattice parameters for the disordered and ordered phases.We catalog the appropriate boundary conditions for all IPBs and APBs. We then focus on the IPB between the disordered A1 phase and the L10 ordered phase. For this IPB we compute the numerical solution of the boundary value problem to find its interfacial energy, γ as a function of orientation, temperature, and chemical potential (or composition). We determine the equilibrium shape for a precipitate of one phase within the other using the Cahn-Hoffman "-vector" formalism. We find that the profile of the interface is determined only by one conserved and one non-conserved order parameter, which leads to a surface energy which, as a function of orientation, is "transversely isotropic" with respect to the tetragonal axis of the L10 phase. We verify the model's consistency with the Gibbs adsorption equation.Article Citation - WoS: 5Citation - Scopus: 5Convergence Analysis and Numerical Solution of the Benjamin-Bona Equation by Lie-Trotter Splitting(TUBITAK, 2018) Zürnacı, Fatma; Gücüyenen Kaymak, Nurcan; Seydaoğlu, Muaz; Tanoğlu, GamzeIn this paper, an operator splitting method is used to analyze nonlinear Benjamin-Bona-Mahony-type equations. We split the equation into an unbounded linear part and a bounded nonlinear part and then Lie-Trotter splitting is applied to the equation. The local error bounds are obtained by using the approach based on the differential theory of operators in a Banach space and the quadrature error estimates via Lie commutator bounds. The global error estimate is obtained via Lady Windermere's fan argument. Finally, to confirm the expected convergence order, numerical examples are studied.