WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
786 results
Filters
Settings
Search Results
Now showing 1 - 10 of 786
Article Identification of Turkish Extra Virgin Olive Oils Produced in Different Regions With Volatile Compounds(Innovhub SSI-Area SSOG, 2025) Sevim, Didar; Koseoglu, Oya; Ertan, Hasan; Ozdemir, Durmun; Ulan, MehmetThis study aims to characterize the composition of the volatile compounds in Turkish extra virgin olive oils (EVOOs) produced from three cultivars-Ayvalik, Gemlik, and Memecik-harvested in the South Marmara, South Aegean, and North Aegean regions during the 2014/15 and 2015/16 crop seasons. A total of 135 EVOO samples were obtained using industrial-scale 2-phase and 3-phase extraction systems. These samples were then analyzed using solid-phase microextraction (SPME) coupled with gas chromatography (GC). Among the twelve volatiles identified, trans-2-hexen-1-ol and cis-2-penten-1-ol exhibited the highest levels of abundance across all samples and seasons. Subsequently, 1-penten-3-one, hexanal, and cis-3-hexenyl acetate were identified, and it was determined that these contribute to the green and fruity sensory profile of high-quality olive oil. Two- and three-factor analyses of variance (ANOVA) revealed that volatile concentrations were significantly influenced by variety, harvest season, and extraction system. It is significant that 1-penten-3-one was found to be significantly influenced by both season and variety (p < 0.05), while 1-penten-3-ol exhibited a multifactorial dependency, with significant two-way interactions (season x variety, season x system, variety x system). Furthermore, PLS-DA-based classification successfully distinguished samples according to olive variety, indicating that volatile profiles could serve as reliable markers for authenticity and geographic origin. These findings underscore the potential of using volatile compounds as quality indicators and for geographic labelling in the olive oil industry.Article Influence of Innovative Thawing Approaches on the Thermal and Chemical Structure Changes of Frozen Beef Liver(Springer, 2026) Avsar, Nazlican; Uzuner, SibelFreezing effectively preserves meat quality, but the formation of ice crystals during the process can impact tenderness and functionality. Thawing is a critical step, as it can lead to physicochemical changes-such as protein oxidation and further ice crystal growth-that may reduce product quality and consumer appeal. Therefore, the thawing method plays a key role in determining the final quality of frozen meat. This study evaluated the physicochemical and structural characteristics of beef liver frozen at - 18 +/- 2 degrees C for 20 h and thawed using three methods: water immersion thawing (WIT), ultrasonic bath thawing (UBT), and air fryer thawing (AFT). No significant differences in drip loss were observed among the UBT, AFT, and WIT samples (p > 0.05). Color measurements (L*, a*, b*) were significantly higher in raw liver than in AFT and UBT samples (p < 0.05). Compared to raw liver and the WIT method, AF and UB thawing lowered the denaturation temperature, indicating reduced thermal stability. The lowest metmyoglobin (MetMb) content was found in the UBT sample (36.57 +/- 0.87%), followed by the AFT sample (41.71 +/- 1.29%), suggesting better pigment preservation with UB thawing. Highlights circle AF and UB thawing methods resulted in a lower denaturation temperature. circle UBT showed the lowest MetMb content, helping to minimize oxidation. circle UBT caused less damage to protein chains and better preserved structural stability. circle UBT preserved desirable aroma characteristics more effectively.Article Cryofixation Strategy for Fabrication of Robust Gelatin-Polyester Conductive Biocomposites(Taylor & Francis Inc, 2026) Koksal, Busra; Onder, Ahmet; Yildiz, Umit HakanThe development of mechanically robust and electroconductive biomaterials is critical for advancing tissue engineering strategies, particularly in neural, cardiac and musculoskeletal applications. Here, we report a polycaprolactone (PCL)-gelatin conductive polymer (poly(3,4-ethylenedioxythiophene):polystyrene sulfonate, PEDOT:PSS) biocomposite with tunable mechanical and electrical properties, fabricated via the cryofixation process relying on rapid reaction between isocyanate-terminated PCL, gelatin and PEDOT:PSS. Two isocyanate sources, hexamethylene diisocyanate (HDI) or isophorone diisocyanate (IPDI) were employed to obtain reactive end-functionalized PCLHDI and PCLIPDI. The cryofixation (at -18 degrees C) of PCLHDI or PCLIPDI, gelatin and PEDOT:PSS was found to occur in unfrozen microdomains and enabled the resultant gel with an inherited network of ice, thereby increasing porosity. Electroconductivity was introduced via the incorporation of PEDOT:PSS, yielding conductive cryogels with porous morphology. The resulting scaffolds exhibited a Young's modulus of 637 Pa and electrical conductivity of 197 mu S/cm, alongside biocompatible nature of gelatin-based gels. This multifunctional platform offers significant promise for the engineering of electrically active tissues.Article FW-S3PFCM: Feature-Weighted Safe-Semi Possibilistic Fuzzy C-Means Clustering(Springer, 2026) Khezri, Shirin; Aghazadeh, Nasser; Hashemzadeh, Mahdi; Golzari Oskouei, AminThe safe semi-supervised fuzzy c-means clustering (S3FCM) method is a well-known clustering method that can produce successful results by incorporating prior knowledge of the class distribution. Its process is fast and simple but still has two limitations. The first issue is that it gives equal weight to all data features, while in real-world applications, different features usually have different importance. Secondly, S3FCM is very sensitive to noise and outliers. This paper proposes an extension of the S3FCM, entitled FW-S3PFCM, to mitigate these shortcomings. The proposed method uses a local feature weighting scheme to consider the different feature weights in the clustering process. Additionally, a possibilistic version of the S3FCM is designed to reduce the sensitivity to noise and outliers. The effectiveness of the proposed method is comprehensively evaluated on various benchmark datasets, and its performance is compared with the state-of-the-arts methods. To practically asses the FW-S3FCM, a real-world dataset of brain MRI images and its segmentation performance are analyzed as well. The average Accuracy, F1-score, Sensitivity, and Precision measures obtained by FW-S3FCM are 0.9682, 0.9826, 0.9743, and 0.9925, respectively, which are better than the competitors' performance.Article Interpretable Structural Modeling of MR Images Using Q-Bezier Curves: A Geometry-Aware Paradigm Beyond Deep Learning(Elsevier Science Inc, 2026) Ozger, Faruk; Onan, Aytug; Turhan, Nezihe; Ozger, Zeynep OdemisMagnetic resonance (MR) imaging plays a critical role in diagnostic workflows, yet its reliability is frequently compromised by scanner-dependent bias, contrast variability, and intensity drift. Although deep learning methods achieve high performance, they generally require extensive supervision and demonstrate limited robustness across diverse clinical settings. To address these challenges, we propose a transparent, geometry-aware framework for annotation-free MR enhancement based on q-B & eacute;zier curves. This model incorporates an adaptive deformation parameter q(x) that modulates local curvature, facilitating flexible adaptation to complex anatomical boundaries. The framework comprises three principal mechanisms: (i) adaptive q(x) for local responsiveness, (ii) monotone q-Bezier tone curves for intensity standardization, and (iii) Tikhonov-regularized optimization for smooth mapping. As a result, the operator remains interpretable, operates in linear time, and provides explicit control over smoothness. The proposed approach was validated across five public cohorts (BraTS, ACDC, PROMISE12, fastMRI, IXI), demonstrating significant improvements in image fidelity (SSIM, CNR, NIQE) and downstream segmentation accuracy (Dice, HD95) relative to variational filters and state-of-theart foundation models. Additionally, cross-vendor experiments confirm its robustness without the need for retraining. Collectively, these findings establish q-Bezier modeling as a principled, lightweight, and clinically interpretable alternative that complements deep learning by providing a geometry-aware pathway to robust MR representation.Article FTIR Spectroscopy Coupled With Chemometrics for Evaluating Functional Food Efficacy in an in Vitro Model of Iron Deficiency Anemia(Elsevier Science Ltd, 2026) Dalyan, Eda; Cavdaroglu, Cagri; Ozen, Banu; Gulec, SukruVibrational spectroscopy offers a rapid, cost-effective approach for studying biological systems. This study employs Fourier Transform Infrared (FTIR) spectroscopy, combined with Soft Independent Modeling of Class Analogy (SIMCA), to evaluate treatment outcomes for iron deficiency anemia (IDA). The model was built using spectra from healthy and anemic cells, then validated with cells treated with commonly used iron supplements. In calibration, 9 of 10 control and all IDA samples were correctly classified; 14 of 15 validation samples were identified as healthy. The model was applied to cells treated with protein-iron complexes. All samples treated with a 60:1 protein-iron ratio matched the healthy group, while 3 of 4 treated with a 10:1 ratio matched the IDA group. These results were further supported by iron-regulated gene expression of transferrin receptor (TFR) and (Ankyrin Repeat Domain 37) ANKRD37. FTIR coupled with chemometrics enables rapid assessment of functional effects and shows potential for screening functional ingredients in anemia-targeted food products.Article Anticancer Properties of Newly Synthesized Pyrrole Derivatives as Potential Tyrosine Kinase Inhibitors(Wiley, 2026) Kaya, Meltem; Kara, Yunus; Sanli-Mohamed, GulsahThe anticancer activity of a series of newly synthesized pyrrole derivatives was systematically evaluated in HeLa cervical cancer cells, focusing on their potential as tyrosine kinase inhibitors and modulators of the mTOR signaling pathway. This study builds on our previous synthetic work by investigating the biological effects of seven structurally characterized compounds (d1-d7). Among them, compounds d1 and d3 exhibited the most potent cytotoxicity, with IC50 values of 140.6 mu M and 366.4 mu M, respectively, after 48 h of treatment. Both compounds significantly impaired cell cycle progression-d1 induced S-phase arrest, while d3 caused G1-phase arrest-and markedly suppressed cell migration in wound healing assays. Mechanistically, these effects were accompanied by reduced phosphorylation of p70S6K (Thr389, Ser421/424) and increased p-4EBP1, indicating inhibition of mTORC1 signaling. These findings suggest that d1 and d3 are promising lead compounds with dual antiproliferative and anti-migratory activity in cervical cancer, mediated through modulation of the PI3K/Akt/mTOR axis.Article Alterations in Secondary Lipids Are Associated with Neuroinflammation in the Brain of Neu1-Deficient Mice(Springer, 2026) Ada, Ebru; Seyrantepe, VolkanNeu1 (lysosomal sialidase 1) is essential for removing sialic acid from oligosaccharides and glycoconjugates. Neu1 deficiency impairs lysosomal digestion, leading to sialidosis and sialoglycoprotein accumulation. It also increases lipids, including gangliosides GM3, GD3, GM4, and LM1, in the kidney, liver, and spleen. Neu1-/- mice display symptoms resembling Type II sialidosis, including enlarged spleen and liver, kidney issues, neurological problems, spinal defects, and oligosaccharide buildup. The study examined secondary lipid alterations and inflammation in the cortex and cerebellum of these mice. Lipidomic, molecular, and immunohistochemical analyses of tissues from 2 and 5 M Neu1-/- mice revealed reduced levels of lipids, including PC, PE, PS, and CL, along with increased pro-inflammatory cytokines and loss of oligodendrocytes and neurons. Signs of astrogliosis and microgliosis emerged in specific brain regions. These results indicate that reduced levels of glycerophospholipids could serve as an indicator of inflammation in sialidosis mice. Future research should investigate therapies targeting these lipid changes, as modulating glycerophospholipids might slow disease progression in sialidosis patients.Article Application of 3D Cell Culture Techniques in Nanotoxicology: How Far Are We(Springer, 2026) Shakeri, Raheleh; Mirjalili, Seyedeh Zohreh; Karakus, Ceyda Oksel; Safavi, MalihehInvestigation of toxicological profile and possible side effects of engineered nanomaterials (ENMs) is of high importance. Historically, two-dimensional (2D) cell culture was used to study the toxicity of the ENMs, but due to their inability to simulate in vivo cell behavior, three-dimensional (3D) cell culture systems have been developed. Nanotoxicity studies initiate with in vitro experiments and continue with in vivo studies, which are very challenging and sometimes accompanied by conflicting data due to the in vitro-in vivo gap. Thus, scientists are turning their attention to microfabrication techniques and engineered systems "called organ-on-a-chips", which act as an intermediate between in vivo and in vitro systems. The present account tries to review the classical study models and suitably cover the emerging 3D culture models including scaffold-free and scaffold-based 3D cell cultures, 3D co-culture with direct contact and without cell-cell contact methods as well as microfluidic-based tissue chips and organoids. Overall, this review aims to give readers a better insight about the ENMs' toxicology and fill the gaps between the knowledge and practical techniques. Hopefully, the presented information will resolve the issues of 2D in vitro cultures and display the clinically relevant responses to the concerns of therapeutic ENMs.Article Ten Questions Concerning Circularity in the Built Environment(Pergamon-Elsevier Science Ltd, 2026) Kayacetin, N. Cihan; Aslanoglu, Rengin; Piccardo, Chiara; Afacan, Yasemin; Masera, Gabriele; Li, Qiuxian; Van Hoof, JoostThe rapid urbanisation of our societies calls for an urban renewal movement, including developing new areas to accommodate housing facilities and services and regenerating existing urban areas. Yet, urban renewal projects pose trade-offs impacting both environmental and socio-economic aspects. The renovation and new construction of buildings can escalate the use of energy and material resources as well as increasing greenhouse gas emissions. The European Union plays a leading role in promoting the transition towards sustainable and inclusive cities, whereas other regions such as North America, Australia and Asia follow suit via Circular Economy Action Plans or Frameworks, highlighting the need to enhance resource efficiency in buildings through the use of durable and circular materials. Current research on resource efficiency in buildings follows the Circular Economy concept, which aims to reduce the use of raw materials and the waste of existing materials while retaining their value for as long as possible. However, the role of the circular economy in sustainable transition and the adoption of its principles in urban contexts remain unclear while its practical implementation still faces significant challenges, including the lack of analytical instruments and assessment methods as well as co-creative approaches. This 'Ten Questions contribution' provides an overview of the pressing issues concerning circularity in the built environment, the state-of-the-art and best practices, challenges and benefits, policies and regulations, as well as numerous strategies applied on the building and neighbourhood level, assessment methodologies and future trends.