WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 4Citation - Scopus: 4Characterization of a Pearlescent Biaxially Oriented Multilayer Polypropylene Film(Lviv Polytechnic National University, 2015) Arkış, Esen; Çetinkaya, Hayrullah; Kurtuluş, Işıl; Ulucan, Utku; Aytaç, Arda; Balcı, Beste; Balköse, DevrimThe morphology, composition, optical, thermal and mechanical properties of a commercial pearlescent and multilayer biaxially oriented polypropylene (BOPP) films were determined. The structure and orientation of BOPP films were confirmed by FTIR spectroscopy, X-ray diffraction and EDX analysis. The films surface roughness was determined by AFM method. The tensile strength of the films was determined in machine and transverse directions.Article Citation - WoS: 2Citation - Scopus: 2A Study of Chemical and Physical Changes During Biaxially Oriented Polypropylene Film Production(Walter de Gruyter GmbH, 2003) Ülkü, Semra; Balköse, Devrim; Arkış, Esen; Sipahioğlu, MuzafferPolypropylene films obtained during the biaxial orientation process were characterized by energy dispersive X-ray analysis (EDX), scanning electron microscopy. X-ray diffraction, differential scanning calorimetry, infrared spectroscopy. Inorganic particles with Al, Si, Na, Mg, Ti, K,O elements were present in biaxially oriented films. Polypropylene had molecules with both isotactic configuration and it was crystallized only in isotactic α phase. The films drawn in one and two directions had unit cells with b axis parallel to surface of the films. The antioxidants present in the films were consumed during processing, preventing polypropylene oxidation in air at high processing temperatures. One surface of the films contained less polypropylene and had functional groups rich in oxygen such as C=O and COO.Article Citation - WoS: 2Citation - Scopus: 1Stabilizing Effect of Biobased Additives on the Thermal Degradation of Pvc(Trans Tech Publications, 2010) Egbuchunam, Theresa Obuajulu; Okieimen, Felix Ebhodaghe; Balköse, DevrimNovel biobased additives prepared from rubber seed oil were evaluated as thermal stabilizer for PVC. Divalent metal (barium and cadmium) soaps of rubber seed oil were prepared by metathesis in aqueous alcohol and characterized by thermal methods (differential scanning calorimetry and thermogravimetry). The stabilizing effect of the soaps and their admixtures on the thermal degradation of PVC powder and plasticized PVC was examined by dynamic thermogravimetry and dehydrochlorination studies at 160°C using the Thermomat equipment. The metal soaps showed multiple decomposition endotherms but were generally stable (with weight loss less than 5%) within the temperature range (180-220°C) frequently used in the processing of PVC. Using the Broido model, values of apparent activation energy of decomposition of between 50 and 200 kJmol-1 were obtained for the soaps. The biobased additives were found to be relatively effective in stabilizing PVC in powder and plasticized forms against thermal degradation. Using inhibition/retardation time, temperature of incipient decomposition, and temperature at which various extents of decomposition was attained as indices of thermal stabilization, the results from this study indicate a potential for the application of the biobased additives as thermal stabilizer for PVC in rigid and flexible formulations. © (2010) Trans Tech Publications, Switzerland.Article Citation - Scopus: 1The Effect of Bio-Based Plasticizer on the Permanence and Water Vapour Transport Properties of Pvc Plastigels(Serbian Chemical Society, 2008) Okieimen, Felix Ebhodaghe; Egbuchunam, Theresa Obuajulu; Balköse, DevrimNovel formulations of PVC plastisols based on blends of bio-based and synthetic plasticizers were prepared and characterized. A traditional phthalate plasticizer, dioctylphthalate, was replaced in the plastisols studied by the epoxidized rubber seed oil (4.5 % oxirane content). The plastisols formed were processed into plastigels and characterized in terms of permanence properties using leaching and migration tests and water vapour barrier properties. It was found that the permanence properties of PVC/DOP plastigels were maintained in the presence of up to 50 % ERSO, and that blending with DOP did not impair the water barrier properties of PVC plastigels.Article Citation - WoS: 47Citation - Scopus: 49Characterization of Hollow Chemical Garden Fibers From Metal Salts and Water Glass(Springer Verlag, 2002) Balköse, Devrim; Özkan, Fehime; Köktürk, Uğur; Ulutan, Sevgi; Ülkü, Semra; Nişli, GürelHollow fibers formed from water glass and metal salts of IIA(Ca), VIIB(Fe, Co, Ni) and IB(Cu) groups were characterised in this study. Fragile fibres obtained herein broke down into small pieces during isolation and drying. Quantitative information about morphology, chemical composition and surface structure of the fibres were obtained. The diameter and wall thickness of the fibers were around 50 μ and 3 μ. respectively. They had particulate inner and smooth outer surfaces. Fibers had variable composition with metal (II) oxide/SiO2 ratio in the range 0.31 to 1.02. While group VIIB metal (II) fibres were amorphous, group IIA and IB metal (II) fibers were partially crystalline All the fibres had pores both in micro pore and meso pore region. The B.E.T. surface area fron N2 adsorption data was in the range of 10-249 m3 g-1 and 8-176 m2 g-1 from Langmuir an B.E.T. models respectively.Article Citation - WoS: 19Flexible Poly(vinyl Chloride)-Zeolite Composites for Dye Adsorption From Aqueous Solutions(Taylor and Francis Ltd., 1996) Balköse, Devrim; Ulutan, Sevgi; Çakıcıoğlu Özkan, Seher Fehime; Ülkü, Semra; Köktürk, UğurFlexible poly(vinyl chloride) (PVC) composites having natural zeolite clinoptillolite were prepared by plastisol-plastigel technology. Adsoption of methylene blue on each raw material and on composites was studied both from an equilibrium and a rate approach. It was observed that the adsorption capacity of zeolite decreased when it was embedded in composites. The equilibrium uptake of methylene blue increased with an increasing zeolite fraction in composites. Methylene blue was adsorbed from a 0.02 g·cm-3 aqueous solution slowly, but was nearly adsorbed completely with a composite having a 0.3 volume fraction of zeolite. The effective diffusion coefficient of methylene blue in composites was of the order of 10-13 m2·s-1 and decreased with increasing filler fraction.