WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
10 results
Search Results
Now showing 1 - 10 of 10
Article Interfacial Convective Heat Transfer for Randomly Generated Porous Media(Begell House, 2018) Uçar, Eren; Mobedi, Moghtada; Ahmadi, AzitaHeat and fluid flow in 20 random porous media is investigated by using the Monte Carlo (MC) procedure. Each porous medium consists of long square rods distributed randomly in flow direction. The continuity, momentum, and energy equations are solved for a row of porous media representing the entire domain of a random porous medium. The microstructure properties of each random porous medium which are the mean and standard deviations of the Voronoi areas, the nearest neighbor distance and orientation are obtained. The rods in the domain are classified into three groups as blocker, active, and passive rods according to their effects on the penetration of heat in porous media. 'The interfacial convective heat transfer coefficients for each rod and entire porous medium are calculated and plotted for different Reynolds numbers. A characteristic length based on the microstructure properties of the generated porous media is defined, and three correlations relating to the upper limit, lower limit, and mean of the overall interfacial convective heat transfer coefficient are proposed.Article Citation - WoS: 12Citation - Scopus: 12Numerical Determination of Interfacial Heat Transfer Coefficient for an Aligned Dual Scale Porous Medium(Emerald Group Publishing, 2018) Sabet, Safa; Mobedi, Moghtada; Barışık, Murat; Nakayama, AkiraPurpose Fluid flow and heat transfer in a dual scale porous media is investigated to determine the interfacial convective heat transfer coefficient, numerically. The studied porous media is a periodic dual scale porous media. It consists of the square rods which are permeable in an aligned arrangement. It is aimed to observe the enhancement of heat transfer through the porous media, which is important for thermal designers, by inserting intra-pores into the square rods. A special attention is given to the roles of size and number of intra-pores on the heat transfer enhancement through the dual scale porous media. The role of intra-pores on the pressure drop of air flow through porous media is also investigated by calculation and comparison of the friction coefficient. Design/methodology/approach To calculate the interfacial convective heat transfer coefficient, the governing equations which are continuity, momentum and energy equations are solved to determine velocity, pressure and temperature fields. As the dual scale porous structure is periodic, a representative elementary volume is generated, and the governing equations are numerically solved for the selected representative volume. By using the obtained velocity, pressure and temperature fields and using volume average definition, the volume average of aforementioned parameters is calculated and upscaled. Then, the interfacial convective heat transfer coefficient and the friction coefficient is numerically determined. The interparticle porosity is changed between 0.4 and 0.75, while the intraparticle varies between 0.2 and 0.75 to explore the effect of intra-pore on heat transfer enhancement. Findings The obtained Nusselt number values are compared with corresponding mono-scale porous media, and it is found that heat transfer through a porous medium can be enhanced threefold (without the increase of pressure drop) by inserting intraparticle pores in flow direction. For the porous media with low values of interparticle porosity (i.e. = 0.4), an optimum intraparticle porosity exists for which the highest heat transfer enhancement can be achieved. This value was found around 0.3 when the interparticle porosity was 0.4. Research limitations/implications The results of the study are interesting, especially from heat transfer enhancement point of view. However, further studies are required. For instance, studies should be performed to analyze the rate of the heat transfer enhancement for different shapes and arrangements of particles and a wider range of porosity. The other important parameter influencing heat transfer enhancement is the direction of pores. In the present study, the intraparticle pores are in flow direction; hence, the enhancement rate of heat transfer for different directions of pores must also be investigated. Practical implications The application of dual scale porous media is widely faced in daily life, nature and industry. The flowing of a fluid through a fiber mat, woven fiber bundles, multifilament textile fibers, oil filters and fractured porous media are some examples for the application of the heat and fluid flow through a dual scale porous media. Heat transfer enhancement. Social implications The enhancement of heat transfer is a significant topic that gained the attention of researchers in recent years. The importance of topic increases day-by-day because of further demands for downsizing of thermal equipment and heat recovery devices. The aim of thermal designers is to enhance heat transfer rate in thermal devices and to reduce their volume (and/or weight in some applications) by using lower mechanical power for cooling. Originality/value The present study might be the first study on determination of thermal transport properties of dual scale porous media yielded interesting results such as considerable enhancement of heat transfer by using proper intraparticle channels in a porous medium.Article Citation - WoS: 4Citation - Scopus: 4A Pore Scale Study on Fluid Flow Through Two Dimensional Dual Scale Porous Media With Small Number of Intraparticle Pores(Walter de Gruyter GmbH, 2016) Sabet, Safa; Mobedi, Moghtada; Özgümüş, TürkülerIn the present study, the fluid flow in a periodic, non-isotropic dual scale porous media consisting of permeable square rods in inline arrangement is analyzed to determine permeability, numerically. The continuity and Navier-Stokes equations are solved to obtain the velocity and pressure distributions in the unit structures of the dual scale porous media for flows within Darcy region. Based on the obtained results, the intrinsic inter and intraparticle permeabilities and the bulk permeability tensor of the dual scale porous media are obtained for different values of inter and intraparticle porosities. The study is performed for interparticle porosities between 0.4 and 0.75 and for intraparticle porosities from 0.2 to 0.8. A correlation based on Kozeny-Carman relationship in terms of inter and intraparticle porosities and permeabilities is proposed to determine the bulk permeability tensor of the dual scale porous media.Article Citation - WoS: 20Citation - Scopus: 20Effect of Pore To Throat Size Ratio on Thermal Dispersion in Porous Media(Elsevier Ltd., 2016) Özgümüş, Türküler; Mobedi, MoghtadaIn this study, the effects of pore to throat size ratio on thermal dispersion of periodic porous media consisting of inline array of rectangular rods are investigated, numerically. The continuity, momentum and energy equations are solved for representative elementary volumes (REVs) of the porous media to obtain microscopic velocities in the voids between the rods and temperature distribution for entire of the REVs. Volume averaging method is employed to compute the macroscopic velocity and temperature values. There are velocity and temperature deviations between the macroscopic and microscopic values. These deviations are computed numerically and thermal dispersion coefficients of the porous media are determined. The aim of this study is to analyze the effects of pore to throat size ratio on the longitudinal and transverse thermal dispersion in the porous media. The study is performed for pore to throat size ratios between 1.63 and 7.46, porosities from 0.7 to 0.9, and pore level Reynolds numbers between 1 and 100. It is found that in addition to the porosity and Reynolds number, the parameter of pore to throat size ratio plays an important role on thermal dispersion in a porous medium. It is found that there is an optimum value of pore to throat size ratio for maximum longitudinal thermal dispersion coefficient; however, the transverse thermal dispersion increases with the increasing of values of pore to throat size ratio.Article Citation - WoS: 100Citation - Scopus: 106Determination of Kozeny Constant Based on Porosity and Pore To Throat Size Ratio in Porous Medium With Rectangular Rods(Taylor and Francis Ltd., 2014) Özgümüş, Türküler; Mobedi, Moghtada; Özkol, ÜnverKozeny-Carman permeability equation is an important relation for the determination of permeability in porous media. In this study, the permeabilities of porous media that contains rectangular rods are determined, numerically. The applicability of Kozeny-Carman equation for the periodic porous media is investigated and the effects of porosity and pore to throat size ratio on Kozeny constant are studied. The continuity and Navier- Stokes equations are solved to determine the velocity and pressure fields in the voids between the rods. Based on the obtained flow field, the permeability values for different porosities from 0.2 to 0.9 and pore to throat size ratio values from 1.63 to 7.46 are computed. Then Kozeny constants for different porous media with various porosity and pore to throat size ratios are obtained and a relationship between Kozeny constant, porosity and pore to throat size ratio is constructed. The study reveals that the pore to throat size ratio is an important geometrical parameter that should be taken into account for deriving a correlation for permeability. The suggestion of a fixed value for Kozeny constant makes the application of Kozeny-Carman permeability equation too narrow for a very specific porous medium. However, it is possible to apply the Kozeny-Carman permeability equation for wide ranges of porous media with different geometrical parameters (various porosity, hydraulic diameter, particle size and aspect ratio) if Kozeny constant is a function of two parameters as porosity and pore to throat size ratios.Article Citation - WoS: 13Citation - Scopus: 19Effect of Pore To Throat Size Ratio on Interfacial Heat Transfer Coefficient of Porous Media(The American Society of Mechanical Engineers(ASME), 2015) Özgümüş, Türküler; Mobedi, MoghtadaIn this study, the effects of pore to throat size ratio on the interfacial heat transfer coefficient for a periodic porous media containing inline array of rectangular rods are investigated, numerically. The continuity, Navier-Stokes, and energy equations are solved for the representative elementary volume (REV) of the porous media to obtain the microscopic velocity and temperature distributions in the voids between the rods. Based on the obtained microscopic temperature distributions, the interfacial convective heat transfer coefficients and the corresponding Nusselt numbers are computed. The study is performed for pore to throat size ratios between 1.63 and 7.46, porosities from 0.7 to 0.9, and Reynolds numbers between 1 and 100. It is found that in addition to porosity and Reynolds number, the parameter of pore to throat size ratio plays an important role on the heat transfer in porous media. For the low values of pore to throat size ratios (i.e., β = 1.63), Nusselt number increases with porosity while for the high values of pore to throat size ratios (i.e., β = 7.46), the opposite behavior is observed. Based on the obtained numerical results, a correlation for the determination of Nusselt number in terms of porosity, pore to throat size ratio, Reynolds and Prandtl numbers is proposed.Article Citation - WoS: 2Citation - Scopus: 3Effect of Voxel Size in Flow Direction on Permeability and Forchheimer Coefficients Determined by Using Micro-Tomography Images of a Porous Medium(Inderscience Enterprises Ltd., 2015) Uçar, Eren; Mobedi, Moghtada; Altıntaş, Gökhan; Glatt, ErikThe permeability and Forchheimer coefficients of a porous medium, volcanic rock, are determined using micro-tomography images. A cubic volume in the middle of the images is extracted as REV (representative volume). The voids in the REV are discretised into anisotropic voxels using the commercial program of GeoDict. Seven computational domains with different voxel size in flow direction are generated. The velocity and pressure fields in the voids are obtained for Reynolds numbers ranging from 0.01 to 10. The obtained fields are used to determine the permeability and the Forchheimer coefficients. The performed calculations show that the nominal pore size changes with the voxel size in flow direction, however permeability and the Forchheimer coefficient approaches to the constant values.Article Citation - WoS: 33Citation - Scopus: 35Thermal Dispersion in Porous Media - a Review on the Experimental Studies for Packed Beds(American Society of Mechanical Engineers, 2013) Özgümüş, Türküler; Mobedi, Moghtada; Özkol, Ünver; Nakayama, AkiraThermal dispersion is an important topic in the convective heat transfer in porous media. In order to determine the heat transfer in a packed bed, the effective thermal conductivity including both stagnant and dispersion thermal conductivities should be known. Several theoretical and experimental studies have been performed on the determination of the effective thermal conductivity. The aim of this study is to review the experimental studies done on the determination of the effective thermal conductivity of the packed beds. In this study, firstly brief information on the definition of the thermal dispersion is presented and then the reported experimental studies on the determination of the effective thermal conductivity are summarized and compared. The reported experimental methods are classified into three groups: (1) heat addition/removal at the lateral boundaries, (2) heat addition at the inlet/ outlet boundary, (3) heat addition inside the bed. For each performed study, the experimental details, methods, obtained results, and suggested correlations for the determination of the effective thermal conductivity are presented. The similarities and differences between experimental methods and reported studies are shown by tables. Comparison of the correlations for the effective thermal conductivity is made by using figures and the results of the studies are discussed. Copyright © 2013 by ASME.Article Citation - WoS: 32Citation - Scopus: 38Fully Developed Forced Convection in a Parallel Plate Channel With a Centered Porous Layer(Springer Verlag, 2012) Çekmer, Özgür; Mobedi, Moghtada; Özerdem, Barış; Pop, IoanIn this study, fully developed heat and fluid flow in a parallel plate channel partially filled with porous layer is analyzed both analytically and numerically. The porous layer is located at the center of the channel and uniform heat flux is applied at the walls. The heat and fluid flow equations for clear fluid and porous regions are separately solved. Continues shear stress and heat flux conditions at the interface are used to determine the interface velocity and temperature. The velocity and temperature profiles in the channel for different values of Darcy number, thermal conductivity ratio, and porous layer thickness are plotted and discussed. The values of Nusselt number and friction factor of a fully clear fluid channel (Nu cl = 4. 12 and fRe cl = 24) are used to define heat transfer increment ratio (ε th = Nu p/Nu cl)and pressure drop increment ratio (ε p = f Re p/f Re cl) and observe the effects of an inserted porous layer on the increase of heat transfer and pressure drop. The heat transfer and pressure drop increment ratios are used to define an overall performance (ε = ε th/ε p) to evaluate overall benefits of an inserted porous layer in a parallel plate channel. The obtained results showed that for a partially porous filled channel, the value of ε is highly influenced from Darcy number, but it is not affected from thermal conductivity ratio (k r) when k r > 2. For a fully porous material filled channel, the value of ε is considerably affected from thermal conductivity ratio as the porous medium is in contact with the channel walls.Article Citation - WoS: 19Citation - Scopus: 23Fully Developed Forced Convection Heat Transfer in a Porous Channel With Asymmetric Heat Flux Boundary Conditions(Springer Verlag, 2011) Çekmer, Özgür; Mobedi, Moghtada; Özerdem, Barış; Pop, IoanAn analytical study is performed on steady, laminar, and fully developed forced convection heat transfer in a parallel plate channel with asymmetric uniform heat flux boundary conditions. The channel is filled with a saturated porous medium, and the lower and upper walls are subjected to different uniform heat fluxes. The dimensionless form of the Darcy-Brinkman momentum equation is solved to determine the dimensionless velocity profile, while the dimensionless energy equation is solved to obtain temperature profile for a hydrodynamically and thermally fully developed flow in the channel. Nusselt numbers for the lower and upper walls and an overall Nusselt number are defined. Analytical expressions for determination of the Nusselt numbers and critical heat flux ratio, at which singularities are observed for individual Nusselt numbers, are obtained. Based on the values of critical heat flux ratio and Darcy number, a diagram is provided to determine the direction of heat transfer between the lower or upper walls while the fluid is flowing in the channel.