WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7150

Browse

Filters

1998 - 199912000 - 200922010 - 20203

Settings

Institution Author: search.filters.institutionAuthor.Sofuoğlu, Sait CemilScopus Q: search.filters.scopusQuartile.Q2

Search Results

Now showing 1 - 6 of 6
  • Article
    Citation - WoS: 64
    Citation - Scopus: 78
    Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites
    (Springer Verlag, 2020) Başalp, Dildare; Tıhmınlıoğlu, Funda; Sofuoğlu, Sait Cemil; İnal, Fikret; Sofuoğlu, Aysun
    In this study, Wood Plastic Composites (WPCs) were produced from post-consumer bulky wastes of recycled plastic and wood in order to minimize waste, decrease environmental effects of plastics, reserve natural resources, and support circular economy for sustainable production and consumption. Five different types of polypropylene (PP) or polyethylene (PE) based recycled plastics and wood obtained from urban household bulky wastes were used in the production of recycled WPC composites, r-WPCs. Virgin WPC (v-WPC) and r-WPC compounds were prepared with wood flour (WF) and maleic anhydride grafted compatibilizer (MAPP or MAPE) to evaluate the effect of recycled polymer type and compatibilizer on the mechanical properties. It was found that tensile strength properties of r-WPCs produced from recycled PP (r-PP) were higher than that of the r-WPCs produced from mixed polyolefins and recycled PE. r-WPCs containing anti-oxidants, UV stabilizers, and compatibilizer with different WF compositions were produced from only recycled garden fraction PP (PPFGF) to determine the optimum composition and processing temperature for pilot scale manufacturing of r-WPCs. Based on tensile, impact, flexural, and water sorption properties of r-WPC compounds with different formulations, the optimum conditions of r-WPC compounds for industrial manufacturing process were determined. Surface morphology of fractured surfaces as well as tensile, flexural and density results of r-WPC compounds revealed the enhancement effect of MAPP on interfacial adhesion in r-WPCs. r-WPC products (crates and table/chair legs) based on bulky wastes were produced using an injection molding process at industrial scale by using 30 wt% WF-filled r-WPC compound. This study demonstrated that r-WPC compounds from recycled bulky plastic and wood wastes can be used as a potential raw material in plastic as well as WPC industry, contributing to circular economy. Graphic
  • Article
    Citation - WoS: 12
    Citation - Scopus: 15
    Assessment and Improvement of Indoor Environmental Quality in a Primary School
    (Taylor and Francis Ltd., 2017) Ekren, Orhan; Karadeniz, Ziya Haktan; Atmaca, İbrahim; Ugranlı Çiçek, Tuğba; Sofuoğlu, Sait Cemil; Toksoy, Macit
    This study reports levels of indoor environmental quality variables before and after installation of heat recovery ventilation in a primary school located in an urban area in Izmir, Turkey. A CO2-based modeling was performed to determine the required flow rates that would comply with an international ventilation standard, followed by computational fluid dynamics modeling for best airflow distribution in a classroom. Temperature, CO2, PM2.5, and total volatile organic compounds were found at undesired levels, among which relative humidity, CO2, and PM2.5 were improved after the intervention. Reductions in the mean and maximum concentrations were 29% and 68% for CO2 and 29% and 46% for PM2.5. This intervention study was a part of the city-wide main project that aimed to increase awareness of the students and their families, teachers, and staff regarding importance of indoor environmental quality in both at school and home due to its possible effects on children's health and academic performance, one of the major challenges of today's societies all around the globe.
  • Article
    Citation - WoS: 9
    Citation - Scopus: 13
    An Exposure–risk Assessment for Potentially Toxic Elements in Rice and Bulgur
    (Springer Verlag, 2017) Sofuoğlu, Sait Cemil; Sofuoğlu, Aysun
    Rice and wheat are rich sources of essential elements. However, they may also accumulate potentially toxic elements (PTE). Bulgur, the popular alternative to rice in the eastern Mediterranean, is produced by processing wheat, during which PTE content may change. This study determined PTE concentrations in rice and bulgur collected from 50 participant households in the City of Izmir, Turkey, estimated ingestion exposure, and associated chronic-toxic and carcinogenic human health risks. Comparison of the determined concentrations to the available standard levels and the levels reported in the literature revealed that Cd, Co, and Pb in rice might be of concern. The estimated health risks of individual participants supported this result with exceedance of respective threshold or acceptable risk levels at the 95th percentile. Population risk estimates indicated that the proportion with higher than the threshold or acceptable risk is about 10%, 24%, and 12% for Cd, Co, and Pb in rice, respectively. Results of this study showed that health risks associated with PTE exposure through bulgur consumption are lower than those of rice, and below the threshold or acceptable risk levels.
  • Article
    Citation - WoS: 14
    Citation - Scopus: 22
    Forecasting Ambient Air So2 Concentrations Using Artificial Neural Networks
    (Taylor and Francis Ltd., 2006) Sofuoğlu, Sait Cemil; Sofuoğlu, Aysun; Birgili, Savaş; Tayfur, Gökmen
    An Artificial Neural Networks (ANNs) model is constructed to forecast SO 2 concentrations in Izmir air. The model uses meteorological variables (wind speed and temperature) and measured particulate matter concentrations as input variables. The correlation coefficient between observed and forecasted concentrations is 0.94 for the network that uses all three variables as input parameters. The root mean square error value of the model is 3.60 g/mt 3 . Considering the limited number of available input variables, model performances show that ANNs are a promising method of modeling to forecast ambient air SO 2 concentrations in Izmir.
  • Article
    Citation - WoS: 39
    Citation - Scopus: 48
    The Indoor Environmental Index and Its Relationship With Symptoms of Office Building Occupants
    (Taylor and Francis Ltd., 2004) Moschandreas, Demetrios J.; Sofuoğlu, Sait Cemil
    An index for indoor environmental quality, the Indoor Environmental Index (IEI), was developed. This study aggregates the Indoor Air Pollution Index, an index found in the literature, and a new index: the Indoor Discomfort Index. The average of these two indices is the IEI, which is calculated using concentrations of eight pollutants and two comfort variables measured in 100 office buildings in the United States. The database used was developed for the U.S. Environmental Protection Agency Building Assessment Survey Evaluation study. A symptom index also is developed to denote persistent occupant symptoms. The IEI and the symptom index are used to investigate the relationship between indoor environmental quality and symptoms. Two simple linear regression models were formulated; these models explain 67 and 79% of the variation in the average symptom index, with the variation of the average IEI depending on the method of averaging used in the construction of the models. In addition, a conceptual explanation is provided for the empirical or regression models formulated. The IEI and the associated models relating indoor environmental quality with the office occupant symptom index may be used as management tools, as illustrated with an example.
  • Article
    Citation - WoS: 20
    Dry Deposition Fluxes and Atmospheric Size Distributions of Mass, Al, and Mg Measured in Southern Lake Michigan During Aeolos
    (Taylor and Francis Ltd., 1998) Sofuoğlu, Sait Cemil; Paode, Rajendra D.; Sivadechathep, Jakkris; Noll, Kenneth E.; Holsen, Thomas M.; Keeler, Gerald J.
    In this study, which was a part of the Atmospheric Exchange Over Lakes and Oceans Study (AEOLOS) investigation, the dry deposition fluxes and atmospheric size distributions (ASDs) of mass and crustal metals (aluminum and magnesium) were measured over the southern basin of Lake Michigan (in Chicago, over Lake Michigan, and in South Haven, Michigan). Airborne crustal metals arise primarily from fugitive dust emissions and are associated with the coarse fraction of atmospheric aerosol. Consequently, they can serve as fingerprints for the atmospheric behavior of fugitive dust. The flux of these metals were substantially higher in Chicago than in either South Haven or over Lake Michigan. The measured average mass, aluminum, and magnesium fluxes were 138, 2.23, and 5.32 mg/m2-day in Chicago, 47.8, 0.24, and 0.28 mg/m2-day over Lake Michigan, and 37.4, 0.17, and 0.12 mg/m2-day in South Haven, respectively. The ASDs of crustal metals measured in Chicago had higher concentrations of coarse particles than ASDs measured over Lake Michigan and in South Haven. The calculated flux of metals using a multistep model and dry deposition velocities obtained from the Sehmel-Hodgson model were in general agreement with measured fluxes of crustal metals. Particles >10 μm were found to be responsible for the majority of the flux.