WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
623 results
Search Results
Now showing 1 - 10 of 623
Article Identification of Turkish Extra Virgin Olive Oils Produced in Different Regions With Volatile Compounds(Innovhub SSI-Area SSOG, 2025) Sevim, Didar; Koseoglu, Oya; Ertan, Hasan; Ozdemir, Durmun; Ulan, MehmetThis study aims to characterize the composition of the volatile compounds in Turkish extra virgin olive oils (EVOOs) produced from three cultivars-Ayvalik, Gemlik, and Memecik-harvested in the South Marmara, South Aegean, and North Aegean regions during the 2014/15 and 2015/16 crop seasons. A total of 135 EVOO samples were obtained using industrial-scale 2-phase and 3-phase extraction systems. These samples were then analyzed using solid-phase microextraction (SPME) coupled with gas chromatography (GC). Among the twelve volatiles identified, trans-2-hexen-1-ol and cis-2-penten-1-ol exhibited the highest levels of abundance across all samples and seasons. Subsequently, 1-penten-3-one, hexanal, and cis-3-hexenyl acetate were identified, and it was determined that these contribute to the green and fruity sensory profile of high-quality olive oil. Two- and three-factor analyses of variance (ANOVA) revealed that volatile concentrations were significantly influenced by variety, harvest season, and extraction system. It is significant that 1-penten-3-one was found to be significantly influenced by both season and variety (p < 0.05), while 1-penten-3-ol exhibited a multifactorial dependency, with significant two-way interactions (season x variety, season x system, variety x system). Furthermore, PLS-DA-based classification successfully distinguished samples according to olive variety, indicating that volatile profiles could serve as reliable markers for authenticity and geographic origin. These findings underscore the potential of using volatile compounds as quality indicators and for geographic labelling in the olive oil industry.Article Interpretable Structural Modeling of MR Images Using Q-Bezier Curves: A Geometry-Aware Paradigm Beyond Deep Learning(Elsevier Science Inc, 2026) Ozger, Faruk; Onan, Aytug; Turhan, Nezihe; Ozger, Zeynep OdemisMagnetic resonance (MR) imaging plays a critical role in diagnostic workflows, yet its reliability is frequently compromised by scanner-dependent bias, contrast variability, and intensity drift. Although deep learning methods achieve high performance, they generally require extensive supervision and demonstrate limited robustness across diverse clinical settings. To address these challenges, we propose a transparent, geometry-aware framework for annotation-free MR enhancement based on q-B & eacute;zier curves. This model incorporates an adaptive deformation parameter q(x) that modulates local curvature, facilitating flexible adaptation to complex anatomical boundaries. The framework comprises three principal mechanisms: (i) adaptive q(x) for local responsiveness, (ii) monotone q-Bezier tone curves for intensity standardization, and (iii) Tikhonov-regularized optimization for smooth mapping. As a result, the operator remains interpretable, operates in linear time, and provides explicit control over smoothness. The proposed approach was validated across five public cohorts (BraTS, ACDC, PROMISE12, fastMRI, IXI), demonstrating significant improvements in image fidelity (SSIM, CNR, NIQE) and downstream segmentation accuracy (Dice, HD95) relative to variational filters and state-of-theart foundation models. Additionally, cross-vendor experiments confirm its robustness without the need for retraining. Collectively, these findings establish q-Bezier modeling as a principled, lightweight, and clinically interpretable alternative that complements deep learning by providing a geometry-aware pathway to robust MR representation.Article Ten Questions Concerning Circularity in the Built Environment(Pergamon-Elsevier Science Ltd, 2026) Kayacetin, N. Cihan; Aslanoglu, Rengin; Piccardo, Chiara; Afacan, Yasemin; Masera, Gabriele; Li, Qiuxian; Van Hoof, JoostThe rapid urbanisation of our societies calls for an urban renewal movement, including developing new areas to accommodate housing facilities and services and regenerating existing urban areas. Yet, urban renewal projects pose trade-offs impacting both environmental and socio-economic aspects. The renovation and new construction of buildings can escalate the use of energy and material resources as well as increasing greenhouse gas emissions. The European Union plays a leading role in promoting the transition towards sustainable and inclusive cities, whereas other regions such as North America, Australia and Asia follow suit via Circular Economy Action Plans or Frameworks, highlighting the need to enhance resource efficiency in buildings through the use of durable and circular materials. Current research on resource efficiency in buildings follows the Circular Economy concept, which aims to reduce the use of raw materials and the waste of existing materials while retaining their value for as long as possible. However, the role of the circular economy in sustainable transition and the adoption of its principles in urban contexts remain unclear while its practical implementation still faces significant challenges, including the lack of analytical instruments and assessment methods as well as co-creative approaches. This 'Ten Questions contribution' provides an overview of the pressing issues concerning circularity in the built environment, the state-of-the-art and best practices, challenges and benefits, policies and regulations, as well as numerous strategies applied on the building and neighbourhood level, assessment methodologies and future trends.Article Artificial Intelligence for Improving Thermal Comfort through Envelope Design in Residential Buildings: Recent Developments and Future Directions(Elsevier Science Sa, 2026) Bayraktar, Arda; Ekici, BerkEnvelopes are vital components for improving thermal comfort in almost all building typologies. Yet, the design and analysis of envelopes are complex, as they involve multiple aspects and various parameters, ensuring comfort standards. Improving thermal comfort in residential buildings is within the scope of researchers to suggest sustainable design alternatives that consider multiple performance aspects and design parameters. Previous review articles have focused on improving thermal performance in residential buildings from the perspective of envelope technology, materials, and design strategies. However, none of them investigated current developments using artificial intelligence (AI), which inevitably supports decision-making in complex circumstances for a sustainable built environment. This review examines the contribution of AI methods, which consist of metaheuristic optimization and machine learning algorithms as sub-branches, to envelope parameters. The paper systematically reviews 95 relevant works on AI, including early approaches, to provide a comprehensive overview of current developments, following PRISMA guidelines. The results showed that early applications considered conventional approaches to improve thermal comfort and energy performance, which mostly limit the results to specified cases. On the other hand, studies utilizing AI methods dealt with numerous parameters, allowing them to cope with complex envelope systems in a reasonable amount of time. The study addresses relevant research questions related to the trends, research methods, system types, AI methods, data types, and their relation to performance and envelope parameters. The study also provides actionable insight, underlining gaps and future works for utilizing machine learning methods in the reviewed research domain.Article Rice-Like, Hollow, and Rhombohedral Nano-Calcite Synthesis by Carbonization(Elsevier, 2026) Kilic, Sevgi; Toprak, Gorkem; Ozdemir, EkremControlling the morphology and size of calcium carbonate (CaCO3) remains an essential challenge in the production of high-performance fillers and advanced functional materials. Here, we report a continuous carbonization strategy that enables the synthesis of monodisperse nano-calcite particles with tunable rice-like, hollow, and rhombohedral morphologies through precise control of CO2 dissolution into a flowing Ca(OH)2 solution under diffusion-limited conditions. A two-stage reactor was designed to decouple nucleation and growth by separating the gas-liquid interaction zone from a stabilization tank. pH and conductivity analyses revealed that crystallization is primarily governed by the CO2 dissolution kinetics rather than mixing intensity in the stabilization tank. SEM and XRD analyses demonstrate a distinct crystallization sequence such that initial formation of rice-like calcite, subsequent development of hollow nanoparticles through selective tip dissolution, and final transformation into rhombohedral calcite via dissolution-reprecipitation mechanism. The method provides a reproducible, template-free route for fabricating hollow CaCO3 nanoparticles, overcoming limitations of bubbletemplating and additive-mediated techniques. This scalable process provides a robust foundation for producing high-surface-area CaCO3 nanomaterials which have potential applications in thin films, ceramics, protective coatings, lightweight composites, thermal/acoustic insulation, adsorption, and catalysis, where tailored particle morphology and size can significantly enhance performance.Article Comparison of the Photoresponse Characteristics for 4H-SiC Schottky Barrier UV Photodetector with Graphene and Ni/Cr Electrode(Elsevier, 2026) Dulcel, Atilla Mert; Gozek, Melike; Unverdi, Ozhan; Celebi, CemGr/4H-SiC and Ni/Cr/4H-SiC Schottky junction UV photodetectors were fabricated and investigated to reveal the effect of electrode materials on the device performance such as spectral response and response speed. I-V characterization, spectral response, and response speed (on-off) measurements were conducted for the UV wavelength range between 200 and 400 nm. The maximum photo-responsivity was obtained as 0.081 A/W for Gr/4H-SiC and 0.041 A/W for Ni/Cr/4H-SiC at a wavelength of 260 nm. This result was attributed to the higher optical transmittance of the graphene electrode compared to the semitransparent Ni/Cr electrode. Zero bias response speed measurements were done under 280 nm wavelength UV light pulsed at different frequencies such as 100 Hz, 500 Hz, and 1000 Hz. The Gr/4H-SiC and Ni/Cr/4H-SiC photodetectors show distinctly different decay times of 5.04 ms and 305.1 mu s, respectively, while their rise times were found to be similar. This observation has been explained by the inclination of graphene to act as a trap site for photogenerated holes.Article Polyaspartic Ester Polyurea-TiO2nanocomposite Coatings for UV Protection of Leading Edge of Wind Turbine Blades(Elsevier B.V., 2026) Olcer, Y.A.; Karabacak, B.D.; Demirkurt, M.; Yoldaş, İ.; Can y, Z.; Demir, M.Polyaspartic ester polyurea (PAEPU) supplies a promising matrix for high-durability coatings. However, its poor UV-A resistance make its usage limited. In this work, commercially available anatase TiO<inf>2</inf> particles (0.05–10 wt%) were dispersed in PAE matrix without any modification. PAEPU/TiO<inf>2</inf> composites were supplied by the reaction of PAE/TiO<inf>2</inf> matrix with an aliphatic isocyanate. UV–Visible spectra of spin coated PAEPU/TiO<inf>2</inf> composite thin films showed an exponential decrease in transmittance with increasing amount of TiO<inf>2.</inf> The optical response is dominated by UV blocking for TiO<inf>2</inf> amounts smaller than 0.3 wt%. For above 0.5 wt% TiO<inf>2</inf> amounts, transparency to translucency transition signifies the beginning of multiple scattering. The diameter of particles analyzed by AFM showed that particle diameter is 47 ± 11 nm taking into account of images of the PAEPU films containing 0.3 wt% of TiO<inf>2</inf> particles. Radial distribution function of the particle domains achieved from microscopy suggests that interparticle distance gets smaller than the wavelength of the incident light even at low the particle concentration. Accelerated weathering test were performed by applying 0.1, 0.5, 1.0, and 3.0 wt% TiO<inf>2</inf> containing PAEPU composite films on a white primer with Doctor Blade method. 0.1 wt% PAEPU/TiO<inf>2</inf> composites shows lower ΔE value compare to both neat and higher amounts of TiO<inf>2</inf> containing PAEPU composite films. The results suggest that without the complexity and cost of the surface modification, the low loading of commercial TiO<inf>2</inf> into PAE matrix may supply UV-stabilized PAEPU coatings relevant to the leading-edge protection of wind-turbine blades. © 2025 Elsevier B.V. All rights are reserved, including those for text and data mining, AI training, and similar technologies.Article Continuous Direct Lithium Extraction from Seawater Via an Unconventional Selective Solid Electrolyte(Elsevier, 2026) Li, Jinghui; Gao, Jiaxuan; Yu, Zihao; Yan, Linxue; Guo, Yafei; Demir, Mustafa; Deng, TianlongWith the significant depletion of terrestrial lithium resources, attention has shifted toward seawater, which holds the largest lithium reserves on Earth. However, extracting lithium from seawater presents a complex challenge due to its intricate composition and extremely low concentration of lithium ions. Herein, we demonstrated inexpensive Li4Ti5O12 as a selective solid electrolyte for direct lithium extraction from seawater. It extracted lithium ions from seawater at an initial concentration of 0.17 mg/L and enriched them to 22.25 mg/L in the receiving solution. The sodium and magnesium ion concentrations were only 33.5 mg/L and 0.66 mg/L. The Li/ Na selectivity (SLi/Na) and Li/Mg selectivity (SLi/Mg) were remarkably high, reaching 42,000 and 240,000, respectively. Furthermore, DFT showed that the energy required for both processes-desolvation of sodium ions and migration of ions within the crystal-is significantly higher than that for lithium ions, which explains the high selectivity of this method. XAS and XRD refinement revealed that the lithium-ion conductor remained stable without any decomposition. In addition, we designed a comprehensive process using the phase equilibrium method, enabling the direct separation of lithium hydroxide without waste when Li4Ti5O12 serves as the selective solid-state electrolyte, thereby highlighting its strong potential for industrial applications.Article Geothermal Drying in Agricultural Sector - Worldwide Examples(Elsevier Ltd, 2026) Tomaszewska, B.; Baba, A.; Akkurt, G.G.; Mukti, M.; Helvaci, H.U.; Bielec, B.; Operacz, A.Agricultural drying is traditionally used to preserve fruits and vegetables which mostly relied on energy-intensive processes usually powered by fossil fuels. In this review, we explore an innovative and sustainable alternative: using geothermal energy to dry produce. The paper reviews the main technical aspects related to the use of geothermal energy in drying fruits and vegetables. We delve into the technical details of two leading methods, hot air drying and refractive window drying, highlighting their advantages, drawbacks, and the critical factors that influence the quality of the final product. By examining real-world applications from countries as diverse as Iceland, the USA, Greece, Turkey, Macedonia, Kenya, Serbia, El Salvador, Guatemala, Mexico, Thailand, Poland, and the Philippines, this paper showcases how geothermal energy can be directly applied in drying operations—whether through standalone systems operating between 60 °C and 97 °C or integrated cascade systems wherever geothermal resources are used for power generation and in the form of the waste heat for drying purposes, can be considered as important direction. Due to a lack of actual information on the economic aspects of geothermal drying, in addition to outlining the technical merits of geothermal drying, we also discuss economic considerations and potential challenges to provide a roadmap for future projects. Moreover, the authors underlined several aspects that can contribute to the failure or limited success of geothermal drying projects. Ultimately, adopting geothermal drying not only reduces greenhouse gases (GHS) emissions but also lessens dependence on costly, polluting fossil fuels, paving the way for a greener, more energy-efficient future in food preservation. © 2025 Elsevier Ltd. All rights are reserved, including those for text and data mining, AI training, and similar technologies.Article Hybrid Heroes of Water Treatment: the Rise of Biochar-Modified Metal Organic Frameworks(Elsevier Science Sa, 2026) Gungormus, Elif; Goren, A. Yagmur; Khataee, AlirezaBiochar-metal organic framework (BC-MOF) composites are highly promising for water treatment due to their synergistic properties. In this regard, this review paper highlights their outstanding performance in removing various pollutants from water. The applications of these composites cover various environmental remediation processes, such as adsorption, photocatalysis, persulfate activation, and Fenton-like degradation. BC-MOF composites have demonstrated high performance in environmental applications, achieving pollutant removal efficiencies exceeding 90 % through adsorption and photocatalytic degradation. Moreover, degradation processes through advanced oxidation pathways, which produce active radicals, such as hydroxyl and superoxide radical-mediated breakdowns, significantly enhance the mineralization of organic pollutants. Many composites also retained >80 % of their initial capacity after 4-6 cycles, indicating good reusability. Overall, BC-MOF composites present a sustainable, high-performance solution for contaminant removal, with broad applicability against antibiotics, dyes, heavy metals, pesticides, and fluoride ions.