WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
15 results
Search Results
Now showing 1 - 10 of 15
Conference Object The Effect of Ag and Ag Plus N Ion Implantation on Cell Attachment Properties(American Institute of Physics, 2009) Urkaç, Emel Sokullu; Öztarhan, Ahmet; Tıhmınlıoğlu, Funda; Deliloğlu, İsmet Gürhan; İz, Sultan Gülce; Oks, Efim; Ila, DaryushImplanted biomedical prosthetic devices are intended to perform safely, reliably and effectively in the human body thus the materials used for orthopedic devices should have good biocompatibility. Ultra High Molecular Weight Poly Ethylene (UHMWPE) has been commonly used for total hip joint replacement because of its very good properties. In this work, UHMWPE samples were Ag and Ag+N ion implanted by using the Metal-Vapor Vacuum Arc (MEVVA) ion implantation technique. Samples were implanted with a fluency of 1017 ion/cm2 and extraction voltage of 30 kV. Rutherford Backscattering Spectrometry (RBS) was used for surface studies. RBS showed the presence of Ag and N on the surface. Cell attachment properties investigated with model cell lines (L929 mouse fibroblasts) to demonstrate that the effect of Ag and Ag+N ion implantation can favorably influence the surface of UHMWPE for biomedical applications. Scanning electron microscopy (SEM) was used to demonstrate the cell attachment on the surface. Study has shown that Ag+N ion implantation represents more effective cell attachment properties on the UHMWPE surfaces.Conference Object Thermal Behaviour of W Plus C Ion Implanted Ultra High Molecular Weight Polyethylene (uhmwpe)(American Institute of Physics, 2009) Urkaç, Emel Sokullu; Öztarhan, Ahmet; Tıhmınlıoğlu, Funda; Ila, Daryush; Budak, S.; Chhay, B.; Nikolaev, A.The aim of this work was to examine thermal behavior of the surface modified Ultra High Molecular Weight Poly Ethylene (UHMWPE) in order to understand the effect of ion implantation on the properties of this polymer which is widely used especially for biomedical applications. UHMWPE samples were Tungsten and Carbon (W+C) hybrid ion implanted by using Metal Vapour Vacuum Arc (MEVVA) ion implantation technique with a fluence of 10 17 ions/cm2 and extraction voltage of 30kV. Untreated and surface-treated samples were investigated by Rutherford Back Scattering (RBS) Analysis, Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) Spectrometry, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). This study has shown that ion implantation represents a powerful tool on modifying thermal properties of UHMWPE surfaces. This combination of properties can make implanted UHMWPE a preferred material for biomedical applications.Conference Object Structural and Thermal Characterization of Ti+o Ion Implanted Ultrahigh Molecular Weight Polyethylene (uhmwpe)(American Institute of Physics, 2009) Öztarhan, Ahmet; Urkaç Sokullu, Şadiye Emel; Tıhmınlıoğlu, Funda; Kaya, N.; Ila, Daryush; Budak, S.; Nikolaev, A.In this work, Metal-Gas Hybrid Ion Implantation technique was used as a tool for the surface modification of Ultra High Molecular Weight Polyethylene (UHMWPE). Samples were Ti + O ion implanted by using Metal-Vapour Vacuum Arc (MEVVA) ion implanter to a fluence of 5x10(16) ion/cm(2) for each species and extraction voltage of 30 kV. Untreated and surface treated samples were investigated by Rutherford Back Scattering (RBS) Spectrometry, Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR) Spectroscopy, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Results indicate that Ti + O ion implantation can be applied on UHMWPE surfaces successfully. ATR-FTIR spectra indicate that the C-H concentration on the surface decreased after Ti + O implantation. Thermal characterization with TGA and DSC shows that polymeric decomposition temperature is shifted after ion implantation.Conference Object Citation - WoS: 3Citation - Scopus: 4Properties of Roman Lime Mortars in Ancient Lycia Region(American Institute of Physics, 2018) Taşcı, Burcu; Böke, HasanIn this study, the characteristics of mortars used in some ancient Roman buildings located Xanthos (Antalya), Patara (Antalya) and Tlos (Mugla) in Southern Turkey were determined in order to define the properties of the new mortars to be used in the conservation works of the buildings. For this purpose, their basic physical properties, raw material compositions, mineralogical and microstructural properties were determined by X-Ray Diffraction, Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy coupled with X-Ray Energy Dispersive Spectroscopy. Analysis results indicated that the binder of the mortars composed of lime and fine aggregates have compact and uniform structure. The mortars are of low density and high porosity were produced from high calcium lime containing magnesium and natural aggregates. The lime and aggregate ratios were between 3/4 - 5/2 by weight and the aggregates with particle sizes greater than 1mm. composed the largest fraction of the aggregates. Lime composed of small size of micritic crystals due to use of aged lime puny. Aggregates were natural and mainly composed of quartz, albite, diopside and amorphous silica that may derived from the use of volcanic ash as pozzolans.Conference Object Citation - WoS: 1Citation - Scopus: 2Three Dimensional Grain Boundary Modeling in Polycrystalline Plasticity(American Institute of Physics, 2018) Yalçınkaya, Tuncay; Özdemir, İzzet; Fırat, Ali OsmanAt grain scale, polycrystalline materials develop heterogeneous plastic deformation fields, localizations and stress concentrations due to variation of grain orientations, geometries and defects. Development of inter-granular stresses due to misorientation are crucial for a range of grain boundary (GB) related failure mechanisms, such as stress corrosion cracking (SCC) and fatigue cracking. Local crystal plasticity finite element modelling of polycrystalline metals at micron scale results in stress jumps at the grain boundaries. Moreover, the concepts such as the transmission of dislocations between grains and strength of the grain boundaries are not included in the modelling. The higher order strain gradient crystal plasticity modelling approaches offer the possibility of defining grain boundary conditions. However, these conditions are mostly not dependent on misorientation of grains and can define only extreme cases. For a proper definition of grain boundary behavior in plasticity, a model for grain boundary behavior should be incorporated into the plasticity framework. In this context, a particular grain boundary model ([l]) is incorporated into a strain gradient crystal plasticity framework ([2]). In a 3-D setting, both bulk and grain boundary models are implemented as user-defined elements in Abaqus. The strain gradient crystal plasticity model works in the bulk elements and considers displacements and plastic slips as degree of freedoms. Interface elements model the plastic slip behavior, yet they do not possess any kind of mechanical cohesive behavior. The physical aspects of grain boundaries and the performance of the model are addressed through numerical examples.Conference Object The Hirota Method for Reaction-Diffusion Equations With Three Distinct Roots(American Institute of Physics, 2004) Tanoğlu, Gamze; Pashaev, OktayThe Hirota Method, with modified background is applied to construct exact analytical solutions of nonlinear reaction-diffusion equations of two types. The first equation has only nonlinear reaction part, while the second one has in addition the nonlinear transport term. For both cases, the reaction part has the form of the third order polynomial with three distinct roots. We found analytic one-soliton solutions and the relationships between three simple roots and the wave speed of the soliton. For the first case, if one of the roots is the mean value of other two roots, the soliton is static.We show that the restriction on three distinct roots to obtain moving soliton is removed in the second case by, adding nonlinear transport term to the first equation.Conference Object Kahve Laboratory Rf Circulator and Transmission Line Project(American Institute of Physics, 2018) Çetinkaya, Hakan; Çağlar, Aslıhan; Çicek, Cihan; Özbey, Aydın; Sunar, Ezgi; Türemen, Görkem; Yıldız, Hüseyin; Yüncü, Alperen; Özcan, Erkcan; Ünel, Gökhan; Yaman, FatihAn 800 MHz RF circulator and transmission line project has recently started at the newly commissioned Kandilli Detector, Accelerator and Instrumentation (KAHVE) Laboratory at the Boǧaziçi University. The aims are to design, build and construct an RF circulator and transmission line in Turkey for high power and high frequency applications. The project consists of 8 transmission line elements: 800 MHz RF generator with 60 kW power (klystron), klystron to waveguide converter, waveguides, E and H bends, 3-port circulator and waveguide to coaxial converter to transmit RF power to a pillbox RF cavity. Design studies and details of the ongoing project will be presented.Conference Object Citation - WoS: 1Citation - Scopus: 1Intrinsic and Statistical Size Effects in Microforming(American Institute of Physics, 2017) Yalçınkaya, Tuncay; Demirci, Aytekin; Simonovski, Igor; Özdemir, İzzetThis paper analyzes the intrinsic (grain size dependent) and the statistical (grain number and orientation distribution dependent) size effects of micron level polycrystalline metallic specimens under plastic deformation through a strain gradient crystal plasticity framework. The macroscopic and local behavior of specimens from very limited number of grains to high number of grains are studied and the results are discussed in detail taking into account different boundary conditions.Conference Object Citation - WoS: 1Citation - Scopus: 1Strain Gradient Polycrystal Plasticity for Micro-Forming(American Institute of Physics, 2016) Yalçınkaya, Tuncay; Simonovski, Igor; Özdemir, İzzetThe developments in the micro-device industry has produced a substantial demand for the miniaturized metallic components with ultra-thin sheet materials that have thickness dimensions on the order of 50-500 μm which are produced through micro-forming processes. It is essential to have predictive tools to simulate the constitutive behavior of the materials at this length scale taking into account the physical and statistical size effect. Recent studies have shown that on the scale of several micrometers and below, crystalline materials behave differently from their bulk equivalent due to micro-structural effects (e.g. grain size, lattice defects and impurities), gradient effects (e.g. lattice curvature due to a non-uniform deformation field) and surface constraints (e.g. hard coatings or free interfaces). These effects could lead to stronger or weaker material response depending on the size and unique micro-structural features of the material. In this paper a plastic slip based strain gradient crystal plasticity model is used to address the effect of microstructural features (e.g. grain size, orientation and the number of grains) on the macroscopic constitutive response and the local behavior of polycrystalline materials.Conference Object Evolution of Binaries Towards Hmxbs and Lmxbs(American Institute of Physics, 2011) Kalomeni, BelindaIn this study we investigate the evolution of binary systems towards low mass x-ray binaries and high mass x-ray binaries using Eggleton's binary star evolution code. © 2011 American Institute of Physics.