WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 2Citation - Scopus: 2Speciation of Inorganic and Organometallic Arsenic in Various Matrices With a Novel Spme Fiber Functionalized With Iron Nanoparticles Prior To Lc-Icp Determination(Elsevier, 2025) Boyaci, Ezel; Cagir, Ali; Shahwan, Talal; Eroglu, Ahmet E.A novel SPME-LC-ICP-MS methodology is described for the simultaneous microextraction/speciation/determination of the metabolically critical inorganic and organoarsenic species, namely, As(III), As(V), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) in natural waters such as drinking and geothermal waters, and biological fluids such as urine. The novelty of the study stems also from the use of home-made SPME fibers for the extraction process, and from the proposed methodology needing no derivatization step. SPME fibers were prepared with in-tube capillary template approach through the immobilization of iron nanoparticles into agarose matrix. The fibers demonstrated reproducible extraction (<10 % RSD), good mechanical strength and good solvent resistivity. The separation of the analytes was realized by HPLC with a strong anion exchange column via gradient elution using different concentrations of (NH4)(2)CO3 (pH 8.50), and the on-line detection of eluted analytes was achieved by ICP-MS. The validity of the proposed methodology was verified via the analysis of certified reference materials (SRM 1643e, Natural Water-Trace Elements, and SRM 2669, Arsenic Species in Frozen Human Urine) and through spike recovery tests. The values of percentage recovery for SRM 2669 were 90.7 % for As(III), 99.8 % for As(V), 93.6 % for DMA, and 85.9 % for MMA. A good correlation was also found between the certified (60.45 mu gL(-1)) and determined (59.00 mu gL(-1)) values for SRM 1643e. Moreover, the speciation capability of the method was demonstrated on various natural waters and biological fluids.Article Citation - WoS: 3Citation - Scopus: 4A Facile Method for Boosting the Graphitic Carbon Nitride's Photocatalytic Activity Based on 0d/2d S-Scheme Heterojunction Nanocomposite Architecture(Elsevier, 2024) Kahraman, Zeynep; Kartal, Uğur; Gent, Aziz; Alp, EmreGraphitic carbon nitride (g-C 3 N 4 ) has received significant interest as a metal -free photocatalyst. The S -scheme photocatalytic system has great potential to improve the charge separation in semiconductor photocatalysts. In this study, we have fabricated non-toxic and low-cost photocatalytic nanocomposites of 0D/2D S -scheme heterojunction composed of iron oxide and graphitic carbon nitride by a facile method. The developed facile method provides a sustainable way with a high atom economy to further enhance the photocatalytic performance of exfoliated g-C 3 N 4 . The 0D -iron oxide/2D-C 3 N 4 exhibited nearly 10 times better than bulk g-C 3 N 4 and almost 60 % better than exfoliated g-C 3 N 4 under simulated solar light irradiation. The experimental results demonstrated that the effective charge -carrier mechanism led to an improved generation of reactive oxygen species (ROSs), resulting in an impressive photocatalytic performance. A serial photocatalytic test was also conducted to understand photocatalytic reaction mechanisms with various scavengers.Article Citation - WoS: 17Citation - Scopus: 19Development of Ca(oh)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nanomaterials(Elsevier, 2023) Mortada, Youssef; Masad, Eyad; Kogbara, Reginald B.; Mansoor, Bilal; Seers, Thomas; Hammoud, Ahmad; Karaki, AymanRecent growth in additive manufacturing (AM) or 3D printing in the construction field has motivated the development of various materials that vary in its composition and properties. This paper introduces, characterizes, and evaluates the performance of a sustainable and environmentally friendly geopolymer mixture composed of construction wastes. The geopolymer mixture has calcium hydroxide (Ca(OH)2) as the main alkaline activator and incorporates nanomaterials such as nano-silica and nano-clay to enhance its suitability for AM. The combined use of Ca(OH)2 for alkali activation, and nanomaterials for tailoring the behavior of construction wastes for 3D printing, is novel and addresses the shortcomings of conventional alkaline activators. The paper includes the outcomes of the analysis of the mechanical properties, printability, and microstructure of the geopolymer mixture. The 28-day compressive strength of the mixture reached 42 MPa with ambient temperature curing, which is comparable to traditional geopolymers. The inclusion of 1 wt % of nano-silica accelerated the geopolymerization process and led to the largest (35 %) reduction in the setting time. Similarly, incorporating 1 wt % of nano-clay led to reduction of the thermal conductivity from 0.709 W/mK to 0.505 W/mK, due to the introduction of thermal barriers. The printability of the studied waste-based geopolymer mixture was validated through the successful fabrication of a 3D-printed model. © 2023 The AuthorsConference Object Computational Nanotoxicology: a Case Study With Silver and Zinc Nanomaterials(Elsevier, 2022) Bilgi, Eyüp; Öksel Karakuş, CeydaNanomaterials (NMs) have been the focus of basic and applied research for more than two decades. According to the updated consumer materials inventory, over 1800 commercial NMs have taken their place in the market, 42% of which are in health and wellness category1. The widespread use of NMs in health-related products made not only the human exposure to the (residues of) NMs inevitable but also the long-recognized concerns over their safety a priority. Despite this pressing need, more than 70% of commercially available nano-containing products do not include sufficient information about their physicochemical and/or toxicological characteristics.Conference Object Development of Novel Nanotoxicity Assessment Method Utilizing 3d Printing System(Elsevier, 2022) Başlar, Muhammet Semih; Öksel Karakuş, Ceyda; Aldemir Dikici, BetülUnique physicochemical properties of nanomaterials (NMs) make them a material of choice in various applications but also raise concerns about their potential toxicity. While the commercial use of nano-enabled materials is growing rapidly, their interaction with biological systems and environment are not yet fully understood [1, 2]. Traditionally, toxicity of nano-sized materials are assessed by 2D cell culture models due to their time and cost-related advantages but their simplicity often comes at the cost of accuracy. While these methods are considered as the first step in toxicological assessment of both nanosized and bulk-form materials, they fall short in mimicking the complexity of in vivo physiological environments.