WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
613 results
Search Results
Now showing 1 - 10 of 613
Article Robust Scheduling of Crude Oil Farming and Processing Under Uncertainty(Elsevier, 2026) Yalcin, Damla; Sildir, HasanThe sulphur content in crude oil has a significant impact on refinery operations, influencing the feasibility of crude blending, the distribution of product yields, and overall economic performance. Variations in sulphur content introduce uncertainty in the short-term scheduling of crude oil loading, blending, and distillation processes. This study introduces a scenario-based stochastic optimization framework in which sulphur uncertainty is treated as a central modeling element, represented through a regression-based relationship with specific gravity (SG). The approach systematically propagates uncertainty through blending decisions, crude distillation unit (CDU) feed composition, and product yields. The problem is modeled as a mixed-integer quadratically constrained programming (MIQCP) formulation within a continuous-time scheduling framework, enabling the simultaneous optimization of timing, blending, and processing strategies. The results indicate that increased sulphur uncertainty adversely affects the distribution of yields for nine end-products, resulting in profit losses. These findings underscore the importance of explicitly managing compositional uncertainty and provide insights into cost-performance trade-offs in refinery scheduling.Article Sustainable Recovery of Critical Raw Materials From Geothermal Igneous Systems: Geochemical, Mineralogical, and Techno-Economic Insights from the Dikili-Bergama Field (Western Anatolia, Turkiye)(Elsevier, 2026) Ayzit, Tolga; Baba, AlperThe sustainable co-extraction of critical raw materials (CRMs) with renewable geothermal energy offers a dual pathway to support the circular economy and low-carbon transition. In this study, an integrated geochemical and mineralogical approach is used to comprehensively assess the recoverable lithium (Li) boron (B), strontium (Sr) and other critical raw materials in the geothermal reservoirs of the Dikili-Bergama region Turkiye. A geochemical analysis was carried out by systematic sampling and multi-element testing of geothermal water and reservoir rock. Hydrogeochemical studies of the geothermal fluids indicated the presence of remarkable concentrations of B (4.6 ppm), Sr (2.8 ppm) and Li (1.2 ppm), suggesting the possibility of active leaching processes in the deposit. Mineralogical studies using X-ray diffraction (XRD) have revealed a number of secondary mineral phases, such as quartz and labradorite, indicating the interaction between water and rock. These interactions affect not only the permeability and porosity of the deposit, but also the mobilization and precipitation of CRMs. A techno-economic analysis will be used to identify potential synergies that could improve the economic feasibility of geothermal projects in the region. The Monte Carlo simulation has shown that the Dikili-Bergama geothermal reservoirs have a potential of similar to 712 tons of Li. In this study, the CRM potential that emerged during the geothermal energy exploitation process in the region was calculated. The temporality and the process of obtaining are completely related to the extraction technology. This offers the dual benefit of renewable energy and strategic mineral extraction, contributing to sustainable resource management in volcanic environments.Article Rice-Like, Hollow, and Rhombohedral Nano-Calcite Synthesis by Carbonization(Elsevier, 2026) Kilic, Sevgi; Toprak, Gorkem; Ozdemir, EkremControlling the morphology and size of calcium carbonate (CaCO3) remains an essential challenge in the production of high-performance fillers and advanced functional materials. Here, we report a continuous carbonization strategy that enables the synthesis of monodisperse nano-calcite particles with tunable rice-like, hollow, and rhombohedral morphologies through precise control of CO2 dissolution into a flowing Ca(OH)2 solution under diffusion-limited conditions. A two-stage reactor was designed to decouple nucleation and growth by separating the gas-liquid interaction zone from a stabilization tank. pH and conductivity analyses revealed that crystallization is primarily governed by the CO2 dissolution kinetics rather than mixing intensity in the stabilization tank. SEM and XRD analyses demonstrate a distinct crystallization sequence such that initial formation of rice-like calcite, subsequent development of hollow nanoparticles through selective tip dissolution, and final transformation into rhombohedral calcite via dissolution-reprecipitation mechanism. The method provides a reproducible, template-free route for fabricating hollow CaCO3 nanoparticles, overcoming limitations of bubbletemplating and additive-mediated techniques. This scalable process provides a robust foundation for producing high-surface-area CaCO3 nanomaterials which have potential applications in thin films, ceramics, protective coatings, lightweight composites, thermal/acoustic insulation, adsorption, and catalysis, where tailored particle morphology and size can significantly enhance performance.Article Fractionation of Guaiacyl and Syringyl-Lignin Units Using Organic Solvent Nanofiltration(Elsevier, 2026) Croes, Tim; Dutta, Abhishek; Van Aelst, Korneel; Sels, Bert; Van der Bruggen, Bart; Cornet, IrisA major obstacle to employing the full potential of lignin-based aromatics is the fractionation of the monomers present in lignin, specifically the separation of guaiacyl (G) and syringyl (S) units, which possess nearly identical molecular weights (196 Da versus 166 Da) and dimensions, and identical functional groups. Such similarities make their separation highly challenging using conventional techniques and are generally considered beyond the capabilities of size-based membrane processes. This study examines the feasibility of organic solvent nano-filtration for fractionation of guaiacyl and syringyl units, and how membrane and process parameters affect separation of these two molecules. Sixteen commercially available membranes were tested with methanol and ethyl acetate as solvents. The results demonstrate that, despite the extreme similarity of the solutes, selective separation is achievable and is primarily governed by membrane material and solvent selection rather than the pore size-based molecular weight cut-off. Polyimide-based solvent-resistant membranes exhibited the highest selectivity, with a maximum observed separation factor of 3.33 obtained using a DuraMemTM 500 membrane in methanol. These findings demonstrate the potential of nanofiltration to address previously unresolved separation challenges in lignin valorization and provide a basis for further process development.Article Comparison of the Photoresponse Characteristics for 4H-SiC Schottky Barrier UV Photodetector with Graphene and Ni/Cr Electrode(Elsevier, 2026) Dulcel, Atilla Mert; Gozek, Melike; Unverdi, Ozhan; Celebi, CemGr/4H-SiC and Ni/Cr/4H-SiC Schottky junction UV photodetectors were fabricated and investigated to reveal the effect of electrode materials on the device performance such as spectral response and response speed. I-V characterization, spectral response, and response speed (on-off) measurements were conducted for the UV wavelength range between 200 and 400 nm. The maximum photo-responsivity was obtained as 0.081 A/W for Gr/4H-SiC and 0.041 A/W for Ni/Cr/4H-SiC at a wavelength of 260 nm. This result was attributed to the higher optical transmittance of the graphene electrode compared to the semitransparent Ni/Cr electrode. Zero bias response speed measurements were done under 280 nm wavelength UV light pulsed at different frequencies such as 100 Hz, 500 Hz, and 1000 Hz. The Gr/4H-SiC and Ni/Cr/4H-SiC photodetectors show distinctly different decay times of 5.04 ms and 305.1 mu s, respectively, while their rise times were found to be similar. This observation has been explained by the inclination of graphene to act as a trap site for photogenerated holes.Article Continuous Direct Lithium Extraction from Seawater Via an Unconventional Selective Solid Electrolyte(Elsevier, 2026) Li, Jinghui; Gao, Jiaxuan; Yu, Zihao; Yan, Linxue; Guo, Yafei; Demir, Mustafa; Deng, TianlongWith the significant depletion of terrestrial lithium resources, attention has shifted toward seawater, which holds the largest lithium reserves on Earth. However, extracting lithium from seawater presents a complex challenge due to its intricate composition and extremely low concentration of lithium ions. Herein, we demonstrated inexpensive Li4Ti5O12 as a selective solid electrolyte for direct lithium extraction from seawater. It extracted lithium ions from seawater at an initial concentration of 0.17 mg/L and enriched them to 22.25 mg/L in the receiving solution. The sodium and magnesium ion concentrations were only 33.5 mg/L and 0.66 mg/L. The Li/ Na selectivity (SLi/Na) and Li/Mg selectivity (SLi/Mg) were remarkably high, reaching 42,000 and 240,000, respectively. Furthermore, DFT showed that the energy required for both processes-desolvation of sodium ions and migration of ions within the crystal-is significantly higher than that for lithium ions, which explains the high selectivity of this method. XAS and XRD refinement revealed that the lithium-ion conductor remained stable without any decomposition. In addition, we designed a comprehensive process using the phase equilibrium method, enabling the direct separation of lithium hydroxide without waste when Li4Ti5O12 serves as the selective solid-state electrolyte, thereby highlighting its strong potential for industrial applications.Article Chloroaluminum Phthalocyanine Loaded Bovine Serum Albumin Nanoparticles as a Dual-Functional Nanoplatform for Sono-Photodynamic Cancer Therapy(Elsevier, 2026) Akyol-Karpuzcu, Cansu; Nartas, Eylem Doga; Calibasi-Kocal, Gizem; Akdogan, YasarChloroaluminum phthalocyanine (ClAlPc) loaded bovine serum albumin (BSA) nanoparticles (NPs) were synthesized as a dual-functional platform for photodynamic and sonodynamic therapies (PDT and SDT). ClAlPc loading did not disturb the morphology of the BSA NPs. Their spherical structure, with a size around 200 nm, was preserved upon ClAlPc loading (1 %w/w). Singlet oxygen productions in the presence of ClAlPc loaded BSA NPs or free ClAlPc were determined by ultraviolet absorption (UV-vis) spectroscopy and electron paramagnetic resonance (EPR) spectroscopy. While a slower rate of singlet oxygen formation rate after both PDT and SDT was detected by UV-vis measurements in the presence of ClAlPc loaded BSA NPs, EPR results showed a similar rate of singlet oxygen formation for both ClAlPc loaded BSA NPs and free ClAlPc. Confocal microscopy confirmed the efficient cellular uptake and perinuclear localization of the ClAlPc loaded BSA NPs in HCT-116 cancer cells. In vitro cytotoxicity studies demonstrated a dose and time dependent photo-and sonotoxic effects in the presence of ClAlPc loaded BSA. In particular, simultaneous application of light and ultrasound as sono-photodynamic therapy (SPDT) resulted in 15 % cell viability in the presence of ClAlPc loaded BSA NPs, which is much lower than individual PDT and SDT results, confirming the effect of the combination therapy on cell viability. In comparison, free ClAlPc reduced cell viability to 27 %. These findings suggest that ClAlPc loaded BSA NPs is a promising "one-for-two" nanoplatform for combined cancer therapy to reduce the limitations of both methods.Article Effects of Cultivation Temperature on Protein Production of Selected Spirulina Strains Under Photobioreactor Conditions(Elsevier, 2026) Binkanat, Tahir Burak; Ozkan, AltanSpirulina is cultivated industrially for food supplement applications due to its high protein content and protein quality. This study assessed the influence of cultivation temperature on the productivity of widely accessible, protein-rich Spirulina strains under standardized bubble column photobioreactor conditions, with the goal of identifying strains with consistently high nutritional value across varying temperatures and culture age for outdoor applications. Five strains were first screened for protein content at 30 degrees C, and three with protein contents >60 % dry biomass were selected for cultivation at 25 degrees C, 35 degrees C, and 40 degrees C. Protein content was measured daily to determine variations, and protein quality was assessed at log and stationary growth phases. The metal content was analyzed to assess the toxic heavy metal bioaccumulation potential. At the optimum temperature of 35 degrees C, the strains had similar biomass productivities. However, the protein contents were highly temperature and strain-specific. Based on the strain, under identical process conditions, a relatively stable protein content of around 65 % or a content variation from 30 to 70 % was observed through the cultivation. Growth at 25 degrees C lowered the biomass productivity without affecting the protein contents, and growth at 40 degrees C lowered both parameters. S. platensis UTEX 2340 had consistently the highest protein quality, reflected by its higher cumulative essential amino acid contents and essential amino acid index scores. However, at 35 degrees C, the strain also had a mercury content exceeding the safety limits set for food supplements. These findings demonstrate the importance of strain selection and cultivation temperature in maintaining the nutritional value of Spirulina-based products.Conference Object Using a Magnetic Column Separator to Determine the Magnetophoretic Behavior and Adhesion Characteristics of Oxygenated Sickle and Healthy Red Blood Cells(Elsevier, 2025) Iyer, Poornima; Choe, Hyeon; Rahman, Md Majidur; Strayer, Jacob; Wu, Xian; Landes, Kristina; Chalmers, JeffreyArticle CFD-DEM Investigation on Particle Separation from Fluid Flow Using Magnetic Fields(Elsevier, 2026) Morsali, Shaghayegh; Kazemi, Saman; Farahani, Farhang Jalali; Zarghami, RezaThis study presents a numerical simulation of magnetic particle separation from fluid flow using CFD-DEM modeling. Studies have shown that magnetic fields are an effective tool for particle separation, especially on small scales, and variables such as magnetic field intensity, fluid velocity, and particle size significantly impact separation efficiency. Other factors, such as the initial location of particles and their density, were also examined, and their effect on the attraction of particles was determined. The magnetic field was applied through a line dipole in the fluid channel. The simulation results show that particles accumulate in the channel area where the line dipole is located, with higher particle concentration at the beginning of the dipole compared to other sections. Additionally, the results indicate that increasing the magnetic field intensity significantly improves separation efficiency, while increasing fluid velocity can decrease this efficiency. At a velocity of 0.2 m per second, results showed that increasing the magnetic field intensity from 0.6 to 3 T improved the capture efficiency from 69 % to 91 %. Similarly, at a magnetic field intensity of 1 T, reducing the fluid velocity from 0.3 to 0.1 m per second doubled the capture efficiency. In the optimal state, combining maximum field intensity with minimum velocity can achieve an efficiency of 98 %. It was also observed that larger particle diameters and higher densities have a positive effect on particle attraction.