WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 27Citation - Scopus: 28Biocomposite Scaffolds for 3d Cell Culture: Propolis Enriched Polyvinyl Alcohol Nanofibers Favoring Cell Adhesion(John Wiley and Sons Inc., 2021) Bilginer, Rumeysa; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuThe objective of this work is generation of propolis/polyvinyl alcohol (PVA) scaffold by electrospinning for 3D cell culture. Here, PVA used as co-spinning agent since propolis alone cannot be easily processed by electrospinning methodology. Propolis takes charge in maximizing biological aspect of scaffold to facilitate cell attachment and proliferation. Morphological analysis showed size of the electrospun nanofibers varied between 172-523 nm and 345-687 nm in diameter, for non-crosslinked and crosslinked scaffolds, respectively. Incorporation of propolis resulted in desired surface properties of hybrid matrix, where hybrid scaffolds highly favored protein adsorption. To examine cell compatibility, NIH-3T3 and HeLa cells were seeded on propolis/PVA hybrid scaffold. Results confirmed that integration of propolis supported cell adhesion and cell proliferation. Also, results indicated electrospun propolis/PVA hybrid scaffold provide suitable microenvironment for cell culturing. Therefore, developed hybrid scaffold could be considered as potential candidate for 3D cell culture and tissue engineering.Article Citation - WoS: 69Citation - Scopus: 77Novel Zein-Based Multilayer Wound Dressing Membranes With Controlled Release of Gentamicin(John Wiley and Sons Inc., 2019) Kimna, Ceren; Tamburacı, Sedef; Tıhmınlıoğlu, FundaRecently, functional multilayer scaffolds with controlled drug release ability come into prominence for wound healing applications to mimic the layered structure of skin tissue and prevent the possible infections at the defect site. In this study, controlled antibiotic releasing zein bilayer membranes were fabricated for treatment of acute skin infections. Gentamicin loaded fibers were prepared by electrospinning on the membrane surface. Membranes were characterized with scanning electron microscope, atomic force microscopy, Fourier transform infrared spectroscopy, contact angle, mechanical analysis, swelling, degradation, and water vapor permeability studies. In vitro cytotoxicity, cell attachment, and proliferation were investigated. Cell attachment on fiber layer was observed with fluorescence imaging. Fabricated fibers showed structural similarity to the skin tissue layers with a fiber diameter range of 350-425 nm and film thickness in the range of 311-361 mu m. Mechanical properties were found compatible with the skin tissue. In addition, membranes showed antimicrobial activity against Staphylococcus aureus and Escherichia coli. The sustained release was achieved with a cumulative release of 94%. Membranes did not show any cytotoxic effect. NIH/3T3 and HS2 cell lines were proliferated on each layer mimicking the multilayer skin tissue. Hence, zein-based bilayer membrane showed promising properties to be used as a potential antimicrobial wound dressing for skin tissue regeneration. (c) 2018 Wiley Periodicals, Inc.Article Citation - WoS: 108Citation - Scopus: 117Enhancement of Interlaminar Fracture Toughness of Carbon Fiber–epoxy Composites Using Polyamide-6,6 Electrospun Nanofibers(John Wiley and Sons Inc., 2017) Beylergil, Bertan; Tanoğlu, Metin; Aktaş, EnginIn this study, carbon fiber–epoxy composites are interleaved with electrospun polyamide-6,6 (PA 66) nanofibers to improve their Mode-I fracture toughness. These nanofibers are directly deposited onto carbon fabrics before composite manufacturing via vacuum infusion. Three-point bending, tensile, compression, interlaminar shear strength, Charpy impact, and double cantilever beam tests are performed on the reference and PA 66 interleaved specimens to evaluate the effects of PA 66 nanofibers on the mechanical properties of composites. To investigate the effect of nanofiber areal weight density (AWD), nanointerlayers with various AWD are prepared by changing the electrospinning duration. It is found that the electrospun PA 66 nanofibers are very effective in improving Mode-I toughness and impact resistance, compressive strength, flexural modulus, and strength of the composites. However, these nanofibers cause a decrease in the tensile strength of the composites. The glass-transition temperature of the composites is not affected by the addition of PA 66 nanofibers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45244.Article Citation - WoS: 24Citation - Scopus: 29Hydrophobic Coatings From Photochemically Prepared Hydrophilic Polymethacrylates Via Electrospraying(John Wiley and Sons Inc., 2017) Işık, Tuğba; Demir, Mustafa Muammer; Aydoğan, Cansu; Çiftçi, Mustafa; Yağcı, YusufLinear poly(hydroxyethyl methacrylate-co-methyl methacrylate) P(HEMA-co-MMA) and poly(dimehylaminoethyl methacrylate-co-methyl methacrylate) P(DMAEMA-co-MMA) and their corresponding hyperbranched copolymers were synthesized by conventional photoinitiated free radical polymerization and self-condensing vinyl polymerization (SCVP) using Type I and Type II photoinitiators, respectively. Then, the polymers were processed by electrospraying in N, N-dimethylformamide. The surface of the resulting electrospray coatings was examined by SEM, XPS, and WCA then compared with those prepared by drop casting. Regardless of the structural nature of the polymers, electrospraying allows the preparation of rough surface that shows more hydrophobic behavior. Electrospray coatings with linear and hyperbranched copolymers exhibited WCA as ∼150° and ∼130°, respectively, indicating that branching reduces the WCA.Article Citation - WoS: 6Citation - Scopus: 7Utilization of Electrospun Polystyrene Membranes as a Preliminary Step for Rapid Diagnosis(John Wiley and Sons Inc., 2016) Işık, Tuğba; Horzum, Nesrin; Yıldız, Ümit Hakan; Liedberg, Bo; Demir, Mustafa MuammerRecent advances in clinical practice drive deoxyribonucleic acid (DNA) as an important class of biomarker. Monitoring the change in their concentration suggests the initiation and/or progression of various disorders. However, low quantity of DNA biomarkers in body fluids requires a delicate isolation methodology that provides efficient separation and easy handling. This study describes a newer-generation separation technology relying on electrospun fibers of sub-micrometer diameter of a commodity polymer for DNA biomarkers in simulative serum. Fibrous polystyrene membranes are prepared by electrospinning and they are subjected to post-modification with Au. The composite membranes may provide a convenient environment for the removal of bovine serum albumin (BSA) from BSA and DNA mixtures. The eluent can be used as an efficient tool for detection of DNA biomarkers associated with diagnosis of numerous life-threatening diseases.Article Citation - WoS: 35Citation - Scopus: 40Olive Leaf Extract as a Crosslinking Agent for the Preparation of Electrospun Zein Fibers(John Wiley and Sons Inc., 2015) Erdogan, I.; Demir, M.; Bayraktar, O.Incorporating active agents, reinforcing structure by crosslinking, thus changing release properties, can be listed as possible modifications in preparation methods of biopolymer fibers. This study introduces oleuropein, major component of olive leaf extract (OLE), as a natural functional crosslinker for electrospun zein fibers, owing to its antioxidant and antimicrobial properties. Incorporation of OLE causes morphological and structural changes indicated by a decrease in fiber diameter up to 27%, an increase in intensity of NH bending region due to interaction with -OH groups and observation of characteristic oleuropein bands. Extract addition also enhances thermal stability. Zein fibers without OLE is fully degraded at 600C, whereas 10% of OLE loaded zein fibers is left undegraded. Fifty percent of initial phenolic content loaded into fibers is released which indicate the effect of OLE incorporation as accumulation of oleuropein. OLE-incorporated fibers immersed in PBS are less fused than pure zein fibers, due to the crosslinking effect. © 2014 Wiley Periodicals, Inc.