WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
34 results
Search Results
Now showing 1 - 10 of 34
Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 18Citation - Scopus: 22Effect of Fomes Fomentarius Cultivation Conditions on Its Adsorption Performance for Anionic and Cationic Dyes(American Chemical Society, 2022) Henning, Laura M.; Simon, Ulla; Abdullayev, Amanmyrat; Schmidt, Bertram; Pohl, Carsten; Nunez Guitar, Tamara; Ahmetoğlu, Çekdar Vakıf; Meyer, Vera; Bekheet, Maged F.; Gurlo, AleksanderLab-cultivated mycelia of Fomes fomentarius (FF), grown on a solid lignocellulose medium (FF-SM) and a liquid glucose medium (FF-LM), and naturally grown fruiting bodies (FF-FB) were studied as biosorbents for the removal of organic dyes methylene blue and Congo red (CR). Both the chemical and microstructural differences were revealed using X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, zeta potential analysis, and scanning electron microscopy, illuminating the superiority of FF-LM and FF-SM over FF-FB in dye adsorption. The adsorption process of CR on FF-LM and FF-SM is best described by the Redlich-Peterson model with β constants close to 1, that is, approaching the monolayer Langmuir model, which reach maximum adsorption capacities of 48.8 and 13.4 mg g-1, respectively, in neutral solutions. Adsorption kinetics follow the pseudo-second-order model where chemisorption is the rate-controlling step. While the desorption efficiencies were low, adsorption performances were preserved and even enhanced under simulated dye effluent conditions. The results suggest that F. fomentarius can be considered an attractive biosorbent in industrial wastewater treatment and that its cultivation conditions can be specifically tailored to tune its cell wall composition and adsorption performance.Article Citation - WoS: 42Citation - Scopus: 44Boron Carbon Nitride Nanosheets in Water and Wastewater Treatment: a Critical Review(Elsevier, 2022) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaThe availability and accessibility of clean and secure water supplies are pressing technological and scientific issues worldwide. As a result of global water constraints, wastewater treatment and reuse are being evaluated as feasible alternatives to fresh water for agricultural irrigation and domestic and industrial purposes. Boron carbon nitride (BCN) nanosheets have been studied intensively in the last decade in batteries, biosensors, and capacitors, and for use as catalysts, and they have recently been used in wastewater treatment. BCN materials, along with their synthesis processes, characteristics, and application areas in water and wastewater treatment, are discussed thoroughly in this paper. Additionally, synthesis processes for ternary BCN compounds, including chemical vapor deposition, ion beam-aided deposition, magnetron sputtering, and pulsed laser deposition, are described. BCN materials have also been explored because of their flexible electrical features, excellent mechanical strength, outstanding unreactivity, and significant stability, which make them appropriate for a range of severe environment applications. Thus, the use of BCN materials as photocatalysts and adsorbents and in electrochemical reduction and capacitive deionization are also discussed thoroughly. The highest ammonia production of 172,226.5 μg/h.mg.cat and faradic efficiency of 95.3% have been obtained using the BCN@Cu/CNT catalyst, whereas the ammonia production and FE values for metal-free BCN are 7.75 μg/h.mg.cat and 13.8%. Moreover, the maximum attained adsorption capacities of BCN nanosheets for Pb2+ and Hg2+ are 210 and 625 mg/g, respectively. Overall, this review indicates that essential work on BCN nanosheets is still needed. Future research should focus on the development of BCN nanostructures to encourage multidisciplinary research.Article Citation - WoS: 68Citation - Scopus: 72Production of Microporous Cu-Doped Btc (cu-Btc) Metal-Organic Framework Composite Materials, Superior Adsorbents for the Removal of Methylene Blue (basic Blue 9)(Elsevier, 2020) Eren, Muhammet Şakir Abdullah; Arslanoğlu, Hasan; Çiftci, HarunCellulosic woven waste was used as a biomass material to prepare a Cu-doped BTC (Cu-BTC) adsorbent, which was then used to remove methylene blue (Basic Blue 9) from wastewater. Cellulosic woven waste was used as a biomass material to prepare a Cu-doped BTC (Cu-BTC) adsorbent, which was then used to remove methylene blue (Basic Blue 9) from wastewater. The Cu-BTC had higher adsorption capacity for methylene blue (BB9) than pure woven waste because it had high specific surface area and electrostatic interaction with cationic methylene blue molecules. The Cu-BTC removed methylene blue from wastewater rapidly and effectively and had an excellent adsorption capacity (197.90 mg/g). In batch process, the adsorption efficiency of the adsorbent for removal of BB9 was evaluated within 20 degrees C-60 degrees C, with initial BB9 concentrations of 50 - 200 mg/L and initial pH of 2 -11. The Cu-BTC activation tailored the topological and textural properties of the obtained adsorbent, leading to a relatively large surface area of 1418.3 m(2)/g and pores with a volume of 0.491 cm(3)/g and an average size of 2.11 nm. The adsorption process fitted well with the Langmuir isotherm and the pseudo-second-order kinetic model. The possible mechanism for methylene blue removal mainly involved electrostatic attraction and micro pores. This study can serve as a guide for value-added utilization of cellulosic woven waste and as a practical method for the removal of methylene blue from wastewater. Adsorption of methylene blue onto the CuBTC is an effective and eco-friendly method for its removal from wastewater.Article Citation - WoS: 4Citation - Scopus: 4Adsorption Kinetics of Methane Reformer Off-Gases on Aluminum Based Metal-Organic Framework(Elsevier Ltd., 2020) Angı, Deniz; Çakıcıoğlu Özkan, Seher FehimeSolvothermal synthesis of aluminum based metal-organic frameworks (MIL-53(Al)s) were conducted by considering the effects of crystallization and activation temperatures, and the solvent at purification step. Adsorption kinetics of Steam Methane Reformer off gas components at 34, 70 and 100 °C temperatures was measured by using ZLC method. Henry constant decreases as diffusion coefficient of the gases increases with increasing temperature; It was determined that the CO gas has the highest activation energy. Adsorption kinetics of gases were controlled with electrostatic interaction. © 2020 Hydrogen Energy Publications LLCArticle Citation - WoS: 47Mitigation of Organophosphate Pesticide Pollution in Agricultural Watersheds(Elsevier, 2020) Şahin, Çağrı; Karpuzcu, M. EkremAdsorption and biodegradation processes for four organophosphate pesticides (chiorpyrifos, diazinon, fenthion, dichlorvos) in wetlands and agricultural drains in Meric-Ergene Basin, Turkey have been investigated. K-oc (organic carbon normalized partition coefficient) values for all pesticides except diazinon were higher in more aromatic Pamuklu Drain sediments, indicating the possible influence of aromaticity on the extent of adsorption. The average half-lives of pesticides in Gala Lake sediments and Pamuklu agricultural drain sediments ranged from 2.25 to 69.31 days with chlorpyrifos exhibiting the slowest biotransformation rate and dichlorvos having the fastest biotransforrnation rate. The presence of humic substances and hydroperiod of wetlands have been identified as possible factors that affected the behavior of organophosphate pesticides in this study. The results from this study provide insight into the constructed wetland design offered for the mitigation of organophosphate pesticides in the basin. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 31Citation - Scopus: 34Dual Remediation of Waste Waters From Methylene Blue and Chromium (vi) Using Thermally Induced Zno Nanofibers(Elsevier, 2020) Elhousseini, Mohamed Hilal; Isık, Tuğba; Kap, Özlem; Verpoort, Francis; Horzum, NesrinElectrospun zinc oxide (ZnO) nanofibers have been significantly improved via a simple heat treatment modification. The present work reports an intriguing cost-effective microstructure tuning, by drastically dropping the temperature of the calcined sample during the cooling period, to get highly photocatalytically active ZnO nanofibers. The calcination temperatures are deducted from thermogravimetric analysis, the phase and purity are confirmed by X-ray diffraction, while the morphology and texture have been revealed by field emission scanning electron microscopy and high-resolution transmission electron spectroscopy. X-ray photoelectron spectroscopy was conducted to get further insight on the surface composition and oxidation states, while N-2-adsorption isotherms were analyzed using the Brunauer-Emmet-Teller methodology. The crystallinity, surface area, and porosity of the ZnO nanofibers, as well as the exposure of active sites, have been enhanced by the rapid cooling method. Photodegradation activity toward methylene blue was improved from 88% to 94%, and 85% to 97%, for free cooled and rapid cooled samples calcined at 300 degrees C and 500 degrees C respectively. The adsorption of chromium (VI) was also tested and reached around 85 mg/g at 100 ppm without being saturated, thereby highlighting one of the most cost-effective performance-enhancing modifications so far that could be extended on different metal oxide nanomaterials.Article Citation - WoS: 18Citation - Scopus: 21Polybrominated Diphenyl Ethers (pbdes) in Background Air Around the Aegean: Implications for Phase Partitioning and Size Distribution(Springer Verlag, 2017) Besis, Athanasios; Lammel, Gerhard; Kukucka, Petr; Samara, Constantini; Sofuoğlu, Aysun; Dumanoğlu, Yetkin; Eleftheriadis, Kostas; Kouvarakis, Giorgos; Sofuoğlu, Sait Cemil; Vassilatou, Vassiliki; Voutsa, DimitraThe occurrence and atmospheric behavior of tri- to deca-polybrominated diphenyl ethers (PBDEs) were investigated during a 2-week campaign concurrently conducted in July 2012 at four background sites around the Aegean Sea. The study focused on the gas/particle (G/P) partitioning at three sites (Ag. Paraskevi/central Greece/suburban, Finokalia/southern Greece/remote coastal, and Urla/Turkey/rural coastal) and on the size distribution at two sites (Neochorouda/northern Greece/rural inland and Finokalia/southern Greece/remote coastal). The lowest mean total (G + P) concentrations of ∑7PBDE (BDE-28, BDE-47, BDE-66, BDE-99, BDE-100, BDE-153, BDE-154) and BDE-209 (0.81 and 0.95 pg m−3, respectively) were found at the remote site Finokalia. Partitioning coefficients, KP, were calculated, and their linear relationships with ambient temperature and the physicochemical properties of the analyzed PBDE congeners, i.e., the subcooled liquid pressure (PL°) and the octanol-air partition coefficient (KOA), were investigated. The equilibrium adsorption (PL°-based) and absorption (KOA-based) models, as well as a steady-state absorption model including an equilibrium and a non-equilibrium term, both being functions of log KOA, were used to predict the fraction Φ of PBDEs associated with the particle phase. The steady-state model proved to be superior to predict G/P partitioning of BDE-209. The distribution of particle-bound PBDEs across size fractions < 0.95, 0.95–1.5, 1.5–3.0, 3.0–7.2, and > 7.2 μm indicated a positive correlation between the mass median aerodynamic diameter and log PL° for the less brominated congeners, whereas a negative correlation was observed for the high brominated congeners. The potential source regions of PBDEs were acknowledged as a combination of long-range transport with short-distance sources.Article Citation - WoS: 3Citation - Scopus: 5Adsorption Characteristics of Lead-, Barium- and Hydrogen-Rich Clinoptilolite Mineral(SAGE Publications Inc., 2003) Çakıcıoğlu Özkan, Seher Fehime; Ülkü, SemraThe carbon dioxide and water vapour adsorption properties of local clinoptilolite-rich material, both as the original and as lead-, barium- and hydrogen-rich forms, were examined. The lead- and barium-rich forms were prepared by treatment of the original clinoptilolite with Pb(NO3)2 and BaCl2 respectively, while the hydrogen-rich form was prepared by NH4Cl and heat treatment. Water and CO2 adsorption experiments were conducted in a volumetric system under static conditions, with low-pressure adsorption data being used for the characterization of the natural, Pb-rich, Ba-rich and H-rich clinoptilolite samples. Although the existence of barium-exchange was not noted, an appreciable decrease in CO2 adsorption was observed with the Pb-rich and H-rich forms due to a decrease in the electrostatic interaction between the surface and the adsorbate. Application of the Dubinin-Astakhov equation to the water adsorption data established the existence of micropores of different sizes that exhibited different adsorption mechanisms.