WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
7 results
Search Results
Now showing 1 - 7 of 7
Article Citation - WoS: 2Citation - Scopus: 2Speciation of Inorganic and Organometallic Arsenic in Various Matrices With a Novel Spme Fiber Functionalized With Iron Nanoparticles Prior To Lc-Icp Determination(Elsevier, 2025) Boyaci, Ezel; Cagir, Ali; Shahwan, Talal; Eroglu, Ahmet E.A novel SPME-LC-ICP-MS methodology is described for the simultaneous microextraction/speciation/determination of the metabolically critical inorganic and organoarsenic species, namely, As(III), As(V), dimethylarsinic acid (DMA), and monomethylarsonic acid (MMA) in natural waters such as drinking and geothermal waters, and biological fluids such as urine. The novelty of the study stems also from the use of home-made SPME fibers for the extraction process, and from the proposed methodology needing no derivatization step. SPME fibers were prepared with in-tube capillary template approach through the immobilization of iron nanoparticles into agarose matrix. The fibers demonstrated reproducible extraction (<10 % RSD), good mechanical strength and good solvent resistivity. The separation of the analytes was realized by HPLC with a strong anion exchange column via gradient elution using different concentrations of (NH4)(2)CO3 (pH 8.50), and the on-line detection of eluted analytes was achieved by ICP-MS. The validity of the proposed methodology was verified via the analysis of certified reference materials (SRM 1643e, Natural Water-Trace Elements, and SRM 2669, Arsenic Species in Frozen Human Urine) and through spike recovery tests. The values of percentage recovery for SRM 2669 were 90.7 % for As(III), 99.8 % for As(V), 93.6 % for DMA, and 85.9 % for MMA. A good correlation was also found between the certified (60.45 mu gL(-1)) and determined (59.00 mu gL(-1)) values for SRM 1643e. Moreover, the speciation capability of the method was demonstrated on various natural waters and biological fluids.Article Citation - WoS: 10Citation - Scopus: 10The Role of Effective Catalysts for Hydrogen Production: a Performance Evaluation(Pergamon-elsevier Science Ltd, 2025) Goren, A. Yagmur; Temiz, Mert; Erdemir, Dogan; Dincer, IbrahimIn recent years, research on hydrogen (H2) production for alternative and environmentally-benign energy solution as fuel, storage medium and feedstock has been one of the most highly demanded subjects. It aims to reduce the pressures set by carbon dioxide emissions and the depletion of fossil fuel supplies. Nevertheless, largescale H2 production is limited by its high cost and low yield. The distinct photo-electrochemical characteristics of catalysts have shown them to have great promise for enhancing the production of H2. This article presents an updated and comprehensive review of enhanced H2 production using various catalysts in biological, thermochemical, and water-based processes. Various operational parameters (reactor configuration, catalyst dosage, catalyst type, catalyst modification methods, temperature, pH, and inoculum type) are summarized to improve the H2 production performance and reduce the environmental impacts and costs of these processes. For instance, in dark fermentation, biological H2 production is enhanced by 3.2-38 % with certain metal catalysts. Overall, results revealed that catalysts, specifically inorganic catalysts such as iron, nickel, titanium oxide, and silver, have improved the production rate of H2. This review has provided the application fields and working principles of catalysts in different H2 production processes. Finally, we suggested the main concerns that need to be prioritized in the long-term advancement of H2 production using catalysts.Article Citation - WoS: 3Citation - Scopus: 3Roadmap on Multifunctional Materials for Drug Delivery(IOP Publishing, 2024) Nottelet, Benjamin; Buwalda, Sytze; van Nostrum, Cornelus F.; Zhao, Xiaofei; Deng, Chao; Zhong, Zhiyuan; Cheah, Ernest; Kehr, Nermin SedaThis Roadmap on drug delivery aims to cover some of the most recent advances in the field of materials for drug delivery systems (DDSs) and emphasizes the role that multifunctional materials play in advancing the performance of modern DDSs in the context of the most current challenges presented. The Roadmap is comprised of multiple sections, each of which introduces the status of the field, the current and future challenges faced, and a perspective of the required advances necessary for biomaterial science to tackle these challenges. It is our hope that this collective vision will contribute to the initiation of conversation and collaboration across all areas of multifunctional materials for DDSs. We stress that this article is not meant to be a fully comprehensive review but rather an up-to-date snapshot of different areas of research, with a minimal number of references that focus upon the very latest research developments.Article Citation - WoS: 17Citation - Scopus: 19Development of Ca(oh)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nanomaterials(Elsevier, 2023) Mortada, Youssef; Masad, Eyad; Kogbara, Reginald B.; Mansoor, Bilal; Seers, Thomas; Hammoud, Ahmad; Karaki, AymanRecent growth in additive manufacturing (AM) or 3D printing in the construction field has motivated the development of various materials that vary in its composition and properties. This paper introduces, characterizes, and evaluates the performance of a sustainable and environmentally friendly geopolymer mixture composed of construction wastes. The geopolymer mixture has calcium hydroxide (Ca(OH)2) as the main alkaline activator and incorporates nanomaterials such as nano-silica and nano-clay to enhance its suitability for AM. The combined use of Ca(OH)2 for alkali activation, and nanomaterials for tailoring the behavior of construction wastes for 3D printing, is novel and addresses the shortcomings of conventional alkaline activators. The paper includes the outcomes of the analysis of the mechanical properties, printability, and microstructure of the geopolymer mixture. The 28-day compressive strength of the mixture reached 42 MPa with ambient temperature curing, which is comparable to traditional geopolymers. The inclusion of 1 wt % of nano-silica accelerated the geopolymerization process and led to the largest (35 %) reduction in the setting time. Similarly, incorporating 1 wt % of nano-clay led to reduction of the thermal conductivity from 0.709 W/mK to 0.505 W/mK, due to the introduction of thermal barriers. The printability of the studied waste-based geopolymer mixture was validated through the successful fabrication of a 3D-printed model. © 2023 The AuthorsConference Object Computational Nanotoxicology: a Case Study With Silver and Zinc Nanomaterials(Elsevier, 2022) Bilgi, Eyüp; Öksel Karakuş, CeydaNanomaterials (NMs) have been the focus of basic and applied research for more than two decades. According to the updated consumer materials inventory, over 1800 commercial NMs have taken their place in the market, 42% of which are in health and wellness category1. The widespread use of NMs in health-related products made not only the human exposure to the (residues of) NMs inevitable but also the long-recognized concerns over their safety a priority. Despite this pressing need, more than 70% of commercially available nano-containing products do not include sufficient information about their physicochemical and/or toxicological characteristics.Conference Object Development of Novel Nanotoxicity Assessment Method Utilizing 3d Printing System(Elsevier, 2022) Başlar, Muhammet Semih; Öksel Karakuş, Ceyda; Aldemir Dikici, BetülUnique physicochemical properties of nanomaterials (NMs) make them a material of choice in various applications but also raise concerns about their potential toxicity. While the commercial use of nano-enabled materials is growing rapidly, their interaction with biological systems and environment are not yet fully understood [1, 2]. Traditionally, toxicity of nano-sized materials are assessed by 2D cell culture models due to their time and cost-related advantages but their simplicity often comes at the cost of accuracy. While these methods are considered as the first step in toxicological assessment of both nanosized and bulk-form materials, they fall short in mimicking the complexity of in vivo physiological environments.Article Citation - WoS: 69Citation - Scopus: 73Nanoparticle-Protein Corona Complex: Understanding Multiple Interactions Between Environmental Factors, Corona Formation, and Biological Activity(Taylor & Francis, 2021) Öksel Karakuş, Ceyda; Tomak, Aysel; Çeşmeli, Selin; Hanoğlu, Berçem Dilan; Winkler, DavidThe surfaces of pristine nanoparticles become rapidly coated by proteins in biological fluids, forming the so-called protein corona. The corona modifies key physicochemical characteristics of nanoparticle surfaces that modulate its biological and pharmacokinetic activity, biodistribution, and safety. In the two decades since the protein corona was identified, the importance of nano particles surface properties in regulating biological responses have been recognized. However, there is still a lack of clarity about the relationships between physiological conditions and cor ona composition over time, and how this controls biological activities/interactions. Here we review recent progress in characterizing the structure and composition of protein corona as a function of biological fluid and time. We summarize the influence of nanoparticle characteristics on protein corona composition and discuss the relevance of protein corona to the biological activity and fate of nanoparticles. The aim is to provide a critical summary of the key factors that affect protein corona formation (e.g. characteristics of nanoparticles and biological environ ment) and how the corona modulates biological activity, cellular uptake, biodistribution, and drug delivery. In addition to a discussion on the importance of the characterization of protein corona adsorbed on nanoparticle surfaces under conditions that mimic relevant physiological environment, we discuss the unresolved technical issues related to the characterization of nano particle-protein corona complexes during their journey in the body. Lastly, the paper offers a perspective on how the existing nanomaterial toxicity data obtained from in vitro studies should be reconsidered in the light of the presence of a protein corona, and how recent advances in fields, such as proteomics and machine learning can be integrated into the quantitative analysis of protein corona components.