WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
41 results
Search Results
Now showing 1 - 10 of 41
Article Citation - WoS: 6Citation - Scopus: 6Effect of the Synthesis Method and Particle Size on Bczt Electrocaloric Properties(Pergamon-elsevier Science Ltd, 2025) Temel, Helin; Avci, Tubanur; Okatan, M. Baris; Alkoy, Sedat; Misirlioglu, I. Burc; Mensur, EbruIn this study, the electrocaloric properties of BCZT ceramics fabricated through different processing methods: solid-state and sol-gel were investigated. The calcination process was done for BCZT powders obtained by sol-gel process at 900 degrees C for 2 h and by solid-state calcination method at 1200 degrees C for 6 h. BCZT-SG ceramics exhibited higher Delta T values, particularly at lower temperatures (similar to 0 degrees C-20 degrees C), and a stronger response to the electric field, suggesting a more efficient domain structure due to sol-gel processing. Notably, BCZT-SGH samples demonstrated the most complex and pronounced electrocaloric behavior, with dual Delta T peaks around 0 degrees C and 50 degrees C, and the highest Delta T of 2.5 K at 80 kV/cm and 50 degrees C, surpassing values in the literature. Especially, high Delta T results at 0 degrees C allows using this material in the extreme conditions. These results emphasize the significant role of processing techniques in tailoring the structural, dielectric, and electrocaloric properties of BCZT ceramics for high-performance energy applications.Article Citation - WoS: 2Citation - Scopus: 2Fabrication of Bioactive Helix Aspersa Extract-Loaded Chitosan-Based Bilayer Wound Dressings for Skin Tissue Regeneration(Amer Chemical Soc, 2024) Perpelek, Merve; Tıhmınlıoğlu, Funda; Tamburaci, Sedef; Karakasli, Ahmet; Tihminlioglu, FundaIn recent years, there has been a notable shift toward exploring plant and animal extracts for the fabrication of tissue engineering structures that seamlessly integrate with the human body, providing both biological compatibility and physical reinforcement. In this particular investigation, we synthesized bilayer wound dressings by incorporating snail (Helix aspersa) secretions, comprising mucus and slime, into chitosan matrices via lyophilization and electrospinning methodologies. A nanofiber layer was integrated on top of the porous structure to mimic the epidermal layer for keratinocyte activity as well as acting as an antibacterial barrier against possible infection, whereas a porous structure was designed to mimic the dermal microenvironment for fibroblast activity. Comprehensive assessments encompassing physical characterization, antimicrobial efficacy, in vitro bioactivity, and wound healing potential were conducted on these bilayer dressings. Our findings revealed that the mucus and slime extract loading significantly altered the morphology in terms of nanofiber diameter and average pore size. Snail extracts loaded on a nanofiber layer of bilayer dressings showed slight antimicrobial activity against Staphylococcus epidermidis and Escherichia coli. An in vitro release study of slime extract loaded in the nanofiber layer indicated that both groups 1 and 2 showed a burst release up to 6 h, and a sustained release was observed up to 96 h for group 1, whereas slime extract release from group 2 continued up to 72 h. In vitro bioactivity assays unveiled the favorable impact of mucus and slime extracts on NIH/3T3 fibroblast and HS2 keratinocyte cell attachment, proliferation, and glycosaminoglycan synthesis. Furthermore, our investigations utilizing the in vitro scratch assay showcased the proliferative and migratory effects of mucus and slime extracts on skin cells. Collectively, our results underscore the promising prospects of bioactive snail secretion-loaded chitosan constructs for facilitating skin regeneration and advancing wound healing therapies.Article Citation - WoS: 1Comparison of Cell-Penetrating and Fusogenic Tat-Ha2 Peptide Performance in Peptideplex, Multicomponent, and Conjugate Sirna Delivery Systems(Amer Chemical Soc, 2024) Uz, Metin; Bulmus, Volga; Altinkaya, Sacide AlsoyIn this study, the performance of the cell-penetrating and fusogenic peptide, TAT-HA2, which consists of a cell-permeable HIV trans-activator of transcription (TAT) protein transduction domain and a pH-responsive influenza A virus hemagglutinin protein (HA2) domain, was comparatively evaluated for the first time in peptideplex, multicomponent, and conjugate siRNA delivery systems. TAT-HA2 in all three systems protected siRNA from degradation, except in the conjugate system with a low Peptide/siRNA ratio. The synergistic effect of different peptide domains enhanced the transfection efficiency of multicomponent and conjugate systems compared to that of peptideplexes, which was attributed to the surface configuration of TAT-HA2 peptides depending on the nature of attachment. Particularly, the multicomponent system showed better cellular uptake and endosomal escape than the peptideplexes, resulting in enhanced siRNA delivery in the cytoplasm. In addition, the presence of cleavable disulfide bonds in multicomponent and conjugate systems promoted the effective siRNA delivery in the cytoplasm, resulting in improved gene silencing activity. The multicomponent system reduced the level of luciferase expression in SKOV3 cells to 45% (+/- 4). In contrast, the conjugate system and the commercially available siRNA transfection agent, Lipofectamine RNAiMax, caused luciferase suppression down to 55% (+/- 2) at a siRNA dose of 100 nM. For the same dose, the peptideplex system could only reduce the luciferase expression to 65% (+/- 5). None of the developed systems showed significant toxicity at any dose. Overall, the TAT-HA2 peptide is promising as a siRNA delivery vector; however, its performance depends on the nature of attachment and, as a result, its surface configuration on the developed delivery system.Article Citation - WoS: 4Citation - Scopus: 4Tailored Bodipy-Based Fluorogenic Probes for Phosgene Detection: a Comparative Evaluation of Recognition Sites(Royal Soc Chemistry, 2024) Dartar, Suay; Kaya, Beraat Umur; Yayak, Yanki Oncu; Vural, Ezgi; Emrullahoglu, MustafaWe constructed two novel boron-dipyrromethene (BODIPY)-based fluorescent probes, BOPD and BOBA, each equipped with the phosgene specific recognition units o-phenylenediamine (OPD) and o-aminobenzylamine (OBA) at the 2-position of the BODIPY core. BOPD and BOBA represent rare examples of BODIPY-based probes that operate by modulating an intramolecular charge transfer process (ICT), as validated by computational studies. We systematically compared the analytic performance of those recognition units while focusing on selectivity, fluorescence turn-on ratios and response times. Probe BOBA, equipped with OBA as the recognition unit, demonstrated a remarkably low detection limit (i.e., 1.40 nM) and a rapid response time (<10 s) for triphosgene. By comparison, BOPD, featuring an OPD unit, showed superior selectivity towards triphosgene, with a detection limit of 93 nM and a response time of up to 30 s. A portable sensing platform was developed by loading BOPD onto test strips made of TLC plates, nonwoven materials and small-headed cotton swabs, which were assessed for their effectiveness in detecting phosgene. We additionally performed the first successful application of a fluorescent probe, namely BOPD, for monitoring the accumulation of phosgene in plants.Article Citation - WoS: 4Citation - Scopus: 4Organolabeler: a Quick and Accurate Annotation Tool for Organoid Images(Amer Chemical Soc, 2024) Kahveci, Burak; Polatli, Elifsu; Bastanlar, Yalin; Guven, SinanOrganoids are self-assembled 3D cellular structures that resemble organs structurally and functionally, providing in vitro platforms for molecular and therapeutic studies. Generation of organoids from human cells often requires long and costly procedures with arguably low efficiency. Prediction and selection of cellular aggregates that result in healthy and functional organoids can be achieved by using artificial intelligence-based tools. Transforming images of 3D cellular constructs into digitally processable data sets for training deep learning models requires labeling of morphological boundaries, which often is performed manually. Here, we report an application named OrganoLabeler, which can create large image-based data sets in a consistent, reliable, fast, and user-friendly manner. OrganoLabeler can create segmented versions of images with combinations of contrast adjusting, K-means clustering, CLAHE, binary, and Otsu thresholding methods. We created embryoid body and brain organoid data sets, of which segmented images were manually created by human researchers and compared with OrganoLabeler. Validation is performed by training U-Net models, which are deep learning models specialized in image segmentation. U-Net models, which are trained with images segmented by OrganoLabeler, achieved similar or better segmentation accuracies than the ones trained with manually labeled reference images. OrganoLabeler can replace manual labeling, providing faster and more accurate results for organoid research free of charge.Article Citation - WoS: 2Citation - Scopus: 2Invasion/Chemotaxis- and Extravasation-Chip Models for Breast Cancer Bone Metastasis(Public Library Science, 2024) Firatligil-Yildirir, Burcu; Bati-Ayaz, Gizem; Nonappa, Devrim; Pesen-Okvur, Devrim; Yalcin-Ozuysal, OzdenBone is one of the most frequently targeted organs in metastatic cancers including the breast. Breast cancer bone metastasis often results in devastating outcomes as limited treatment options are currently available. Therefore, innovative methods are needed to provide earlier detection and thus better treatment and prognosis. Here, we present a new approach to model bone-like microenvironments to detect invasion and extravasation of breast cancer cells using invasion/chemotaxis (IC-) and extravasation (EX-) chips, respectively. Our results show that the behaviors of MDA-MB-231 breast cancer cells on IC- and EX-chip models correlate with their in vivo metastatic potential. Our culture model constitutes cell lines representing osteoblasts, bone marrow stromal cells, and monocytes embedded in three-dimensional (3D) collagen I-based extracellular matrices of varying composition and stiffness. We show that collagen I offers a better bone-like environment for bone cells and matrix composition and stiffness regulate the invasion of breast cancer cells. Using in situ contactless rheological measurements under cell culture conditions, we show that the presence of cells increased the stiffness values of the matrices up to 1200 Pa when monitored for five days. This suggests that the cellular composition has a significant effect on regulating matrix mechanical properties, which in turn contribute to the invasiveness. The platforms we present here enable the investigation of the underlying molecular mechanisms in breast cancer bone metastasis and provide the groundwork of developing preclinical tools for the prediction of bone metastasis risk.Conference Object Citation - WoS: 1The Effects of Novel Telomerase Activators on Human Adipose-Derived Mesenchymal Stem Cell (had-Msc) Proliferation and Osteogenic Differentiation(Georg Thieme verlag Kg, 2022) Kuru, G.; Kucuksolak, M.; Pulat, G.; Karaman, O.; Bedir, E.[No Abstract Available]Article Citation - WoS: 1Citation - Scopus: 2Concurrent Boron Removal From Reverse Osmosis Concentrate and Energy Production Using a Microbial Desalination Cell-Donnan Dialysis Hybrid System(Royal Soc Chemistry, 2024) Goren, A. Yagmur; Okten, H. EserThe removal of boron from aqueous solutions offers an important opportunity to improve the management of sustainable resources. In this regard, microbial desalination cells (MDCs) are a promising bioelectrochemical approach for effective water treatment, but the integrated MDC-Donnan Dialysis (DD) process for boron removal from reverse osmosis (RO) concentrated effluents has not been investigated before. Integration of the DD process with MDC is investigated in this paper for the first time to enhance the efficiency of the process by providing pre-treatment and natural pH manipulation. Therefore, the MDC process was evaluated for boron removal from boron-containing synthetic solution, geothermal water, and RO-concentrated effluent with the help of the DD system. The highest boron removal performance, with an efficiency of 72.1% in the desalination chamber and 74.8% in the DD-feed chamber, was obtained for boron-containing synthetic solution, while the COD removal efficiency was almost 90% in all water resources. However, the maximum power density was 4818 mW m-2 with a closed circuit voltage of 1317 mV for RO concentrated water treatment due to its high ionic strength. Moreover, the most crucial output of this study is that the pH value of the system did not need to be adjusted continuously to convert the uncharged boric acid into the borate ion in the charged form owing to better manipulation of the pH by the DD system. Overall, the integrated MDC-DD system provided promising results, presenting effective boron-containing water desalination, yeast wastewater treatment, and enhanced energy production.Article Citation - WoS: 2Citation - Scopus: 2Investigation of the Biocompatibility of Various Pulp Capping Materials on Zebrafish Model(Public Library Science, 2024) Karahan, Meltem; Eliacik, Bahar Basak Kiziltan; Cagiral, Umut; Iscan, Evin; Ozhan, GunesTesting the biocompatibility of commercially available dental materials is a major challenge in dental material science. In the present study, the biocompatibility of four commercially available dental materials Mineral Trioxide Aggregate, Biodentine, Harvard BioCal-CAP and Oxford ActiveCal PC was investigated. The biocompatibility analysis was performed on zebrafish embryos and larvae using standard toxicity tests such as survivability and hatching rates. Comparative toxicity analysis of toxicity was performed by measuring apoptosis using acridine orange dye and whole mount immunofluorescence methods on zebrafish larvae exposed to the dental materials at different dilutions. Toxicity analysis showed a significant decrease in survival and hatching rates with increasing concentration of exposed materials. The results of the apoptosis assay with acridine orange showed greater biocompatibility of Biodentine, Oxford ActiveCal PC, Harvard BioCal-CAP and Biodentine compared to MTA, which was concentration dependent. Consequently, this study has shown that showed resin-modified calcium silicates are more biocompatible than traditional calcium silicates.Article Citation - WoS: 10Citation - Scopus: 10Structural, Electronic, Vibrational, and Thermoelectric Properties of Janus Ge 2 P<i> X</I> (<i> X</I> = N, As, Sb, and Bi) Monolayers(Amer Physical Soc, 2024) Ozbey, Dogukan Hazar; Varjovi, Mirali Jahangirzadeh; Sargin, Gozde Ozbal; Sevincli, Haldun; Durgun, EnginTwo-dimensional (2D) Janus systems have garnered significant scientific interest owing to their novel properties and potential applications. The growing interest in these materials is driven by the idea that their structural asymmetry offers unprecedented opportunities for enhancing thermoelectric performance and unlocking groundbreaking advancements in energy conversion and waste heat utilization. In this context, we present a comprehensive study on the structural, vibrational, electronic, thermal, and thermoelectric properties of Janus Ge2PX(X = N, As, Sb, and Bi) monolayers, using first-principles calculations combined with the Landauer formalism. The suggested configurations exhibit dynamical stability and retain structural integrity even at elevated temperatures. Electronic structure calculations employing hybrid functionals (HSE06) with spin-orbit coupling reveal that Ge2PAs and Ge2PSb monolayers exhibit anisotropic characteristics as indirect semiconductors, while Ge2PN and Ge2PBi exhibit metallic behavior. We also compare the thermal, electronic, and thermoelectric transport properties of these proposed monolayers to binary 2D GeP in the ballistic limit. Notably, both Ge2PAs and Ge2PSb exhibit n-type figure of merit (ZT ) values exceeding 1 at 800 K, with their n-type ZT values surpassing that of GeP at room temperature. Our analysis underscores the distinctive structural and electronic properties of Ge2PAs and Ge2PSb monolayers, accompanied by their highly promising thermoelectric performance. These findings position them as strong candidates for energy harvesting and conversion applications.