TR Dizin İndeksli Yayınlar / TR Dizin Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7149
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Article Lubricants Having Zinc Borate by Homogeneous Precipitation and Span 60 in Spindle Oil(Turkish Energy Nuclear and Mining Research Institute, 2021) Gönen, Mehmet; Alp, Burcu; Savrık, Sevdiye; Balköse, Devrim; Alp, Fatma Burcu; Balkose, DevrimNano particles of zinc borate were obtained by homogeneous precipitation method which is based on dissolving zinc borate in ammonia and precipitating it as nano particles by slow evaporation of ammonia. The synthesized zinc borates were characterized by advanced analytical techniques. Zinc borate nano particles were used as a lubricant additive to spindle oil having Span 60 dispersant. The particles were well dispersed in spindle oil as shown by optical microscopy of the oils. Four ball tests of the lubricants indicated zinc borate lowered (61.8%) the wear scar diameter significantly. The hardness of wear surfaces of test balls was reduced from 688 HV to 618 HV and presence of zinc borate particles embedded on the surface indicated a flexible skin was formed. Therefore the pressure was decreased due to increase of the contact area of the balls. The surface roughness was also decreased from 35.63 nm to 27.60 nm by the addition of zinc borate to spindle oil having Span 60. Zinc borate prepared by homogeneous precipitation technique lowered the wear of the surfaces that rub to each other.Article Citation - Scopus: 5Nano Zinc Borate as a Lubricant Additive(Turkish Chemical Society, 2018) Savrık, Sevdiye Atakul; Üstün, Fatma; Alp, Burcu; Balköse, DevrimLubricants consist of base oils and chemical additives such as dispersants, surfactants, oxidation inhibitors, and antiwear agents. Organic and inorganic boron-based additives increase wear resistance and decreases friction. Hexagonal boron nitride and metal borates are used for this purpose. Zinc borate is a synthetic hydrated metal borate. The production techniques of zinc borate generally include the reaction between zinc source materials (zinc oxide, zinc salts, zinc hydroxide) and the boron source materials (boric acid and borax). The nano zinc borate particles were prepared from zinc nitrate and borax in the present study by using low initial zinc and borate concentrations and low temperature to prevent particle growth. The templates span 60 and PEG 4000 were used to control the particle size. The particles were separated from mother liquor by centrifugation, washed with ethanol, dried and ground and used as additive to base oil. The particles have H2O and B(3)-O vibrations in their FTIR spectra. The empirical formula of the nanoparticles was approximately 3ZnO.2B2O3.4H2O from EDX and TGA analysis. X-ray diffraction diagram indicated the particles were in amorphous state. When the nanoparticles were added to light neutral oil the wear scar diameter and friction coefficient was lowered 50% and 20% respectively.