TR Dizin İndeksli Yayınlar / TR Dizin Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7149
Browse
9 results
Search Results
Now showing 1 - 9 of 9
Article Citation - Scopus: 2Indoor Air Co2 Concentrations and Ventilation Rates in Two Residences in İzmir, Turkey(Yıldız Teknik Üniversitesi, 2022) Taşer, Aybüke; Uçaryılmaz, Sedef; Çataroğlu, Ilgın; Sofuoğlu, Sait CemilHouses are the places where people spend most of their time. That is why indoor air quality at home is essential for public health. Sufficient ventilation is the factor to avoid accumulation of pollutants in indoor air, which include microorganisms, such as SARS-CoV-2. Therefore, adequate ventilation is needed to provide good indoor air quality for human health and reduce infection risk at home. There are no reports of residential ventilation rates in Turkey. In this study, CO2 concentrations were measured in two residences in Izmir, Turkey. Three experiments were conducted to determine background concentrations and the rate of natural ventilation with infiltration and opening windows. Results show that air exchange provided by infiltration is low for both case rooms, while adequate ventilation could be achieved with natural ventilation under the studied conditions. Infiltration provided air exchange and ventilation rates of 0.18 h-1 and 5.9 m3/h for Case 1 and 0.29 h-1 and 8.23 m3/h for Case 2, respectively. Air exchange and ventilation rates were increased to 2.36 h-1 and 76.9 m3/h for Case 1 and 1.2 h-1 and 34 m3/h for Case 2, respectively, by opening the windows. Although ventilation can be provided by opening the windows, the other factors that determine its rate, e.g., meteorological variables, cannot be controlled by the occupants. Consequently, people cannot ensure the good indoor air quality in bedrooms and sufficient reduction in transmission of pathogenic microorganisms; therefore, risk of spreading diseases such as COVID-19 at home.Article Citation - WoS: 1Children in Urban Environments: a Case Study From a Dense Neighbourhood in Izmir-Turkey(Yıldız Teknik Üniversitesi, 2022) Dikmen Güleryüz, Oylum; Doğan, Fehmi; Kasalı, AltuğThe aim of this study is to understand children's engagement with their urban outdoor environments in Izmir-Turkey, a city with a high urbanisation rate, and to explore the factors that affect their outdoor preferences outside of their school time. The study consists of a field study conducted in a densely populated middle-income neighbourhood. Participants are fourth-grade children from a state-run primary school aged 9-11 years (n=44) and their parents (n=40). The study followed a multi-methodological approach, employing questionnaires, drawing and story writing tasks as data collection methods. Results of the study showed the strong tendency to prefer outdoors during their free time even when their neighbourhood is a high-density urban settlement with limited opportunities for outdoor activities. In the studied neighbourhood, most of the participants mentioned the schoolyard over other locations as their preferred place fin- outdoor play. Other than the schoolyard, the children mainly reported familiar places in their neighbourhoods, close to their local environments which were also depicted in their drawings and described in their stories. From the perspectives of urban designers and policy-makers, the findings of the study highlight aspects to be concerned about opportunities for outdoor play in high-density and urbanised central neighbourhoods.Article Citation - WoS: 2Cephe Yönlenmesinin Tarihi Konutların Enerji Kullanımına Etkileri: Güneybatı Anadolu’da Dış Sofalı Konutlar(Yıldız Teknik Üniversitesi, 2022) Timur, Barış Ali; Başaran, Tahsin; İpekoğlu, BaşakCephe yönlenme durumu, yapıların enerji kullanım miktarlarını etkileyen önemli bir tasarım parametresi olarak kabul edilmektedir. Bu parametre özellikle yeni yapı tasarımı alanında, yönlenme optimizasyon kararları geliştirmek üzere birçok araştırmada incelenmiştir. Buna karşılık, tarihi yapıların yönlenmesi ve enerji kullanım miktarları arasındaki ilişkiyi irdeleyen çalışmalar sınırlıdır. Bu çalışmanın amacı, Anadolu coğrafyasında yaygın bir tarihi yapı türü olan dış sofalı konutların Muğla kenti örnek yerleşmesindeki hâkim yönlenme durumları ile enerji kullanım düzeyleri arasında belirgin bir ilişki olup olmadığının araştırılmasıdır. Araştırma yöntemi, DesignBuilder v.5.4.0.21 yazılımında gerçekleştirilmiş olan yapı ısıl modellemesi ve simülasyonudur. Çalışmada, örnek bir tarihi konutun mimari özellikleri kullanılarak oluşturulmuş sanal bir yapı modelinin sofa yönlenme durumu, ana ve ara yönlere göre değiştirilerek ısıl simülasyonları gerçekleştirilmiş ve simülasyonlar sonucu hesaplanan ısıtma ve soğutma enerji ihtiyaçları karşılaştırılmıştır. Simülasyonlar, karşılaştırmalı olarak önce yapı çevresindeki kütle ve peyzaj elemanlarıyla sonra bu elemanlar olmadan iki sonuç seti için gerçekleştirilmiştir. Simülasyonlar sonucunda, örnek yapı türü için en iyi ve en verimsiz yönlenme durumları arasında enerji kullanımı açısından hesaplanan oransal farkın %1,3 ile %2,2 arasında olduğu saptanmıştır. Bu sonuca göre, örnek yapı türü enerji kullanım durumunun çok yüksek oranda yönlenmeden bağımsız olduğu, bu nedenle de örnek yerleşmedeki dış sofalı konutlar için hâkim yönlenme tercihi ile yapı enerji kullanım düzeyleri arasında dikkate değer bir ilişki olmadığı belirlenmiştir.Article Citation - WoS: 1Hafıza Kutusu: Bir Kentsel Kolektif Bellek Deneyi(mi)(Yıldız Teknik Üniversitesi, 2017) Doğu, Tuba; Varkal Deligöz, MelisKentsel tasarımda kullanıcı katılımına verilen önem son yıllarda tüm dünyada artış göstermektedir. Türkiye’de de gerek yerel yönetimlerin teşviği, gerekse sivil insiyatifler ve mahalle örgütlenmeleriyle kentsel mekânların şekillenmesini gözlemlemek mümkündür. Buradan yola çıkan bu çalışma, 1960’lardan bu yana İzmir Güzelyalı’da yer alan bir kültür mekânının mahalleli eliyle dönüşümünü inceler. Sözlü tarih çalışmalarına yeni bir yöntem önerisi sunar ve mahallelinin ne denli etkin olduğunu okumak adına bir hatırlama süreci kurgular. Bu kurgu, kolektif bellek üzerinden kamusal bir yerleştirme olup, anlatılar ardındaki kolektif motivasyonu inceler. Amaç, geçmişi günümüzde okuyarak, kentsel mekânlarda yeni sivil eylemlere ışık tutmaktır.Article Tipleri Yeniden Düşünmek: Mimari Tasarım Stüdyoları İçin Tip Odaklı Bir Pedagoji Önerisi(Yıldız Teknik Üniversitesi, 2020) Kasalı, AltuğMimarlık disiplini içinde farklı zaman dilimlerinde tekrarlanan bir tartışma konusu olarak karşımıza çıkan tip ve tipoloji kavramları makalenin ana konusunu oluşturur. Tasarım süreçlerine dair analitik bir kavram olarak tanımlanabilecek tip için çeşitli tanımlar bulunsa da, tasarımcıların tipleri nasıl araçsal hale getirip kullandığı farklılıklar gösterir. Bu makalede öncelikle tip üzerine birikmiş literatüre dair kısa bir döküm sunulacaktır. Ardından, farklı dönemlerde tipleri tasarım uygulamaları içerisinde ana eksene alan mimarların işlerinden bahsedilecektir. Kuram ve uygulama yaklaşımları üzerinden gidilerek, tipleri tasarım süreçleri içerisinde ana eksene alan bir tasarım stüdyosu pedagojisinin ana hatlarına yer verilecektir. Son olarak, tiplerin tasarım süreçlerindeki rolü üzerine kısa bir değerlendirme sunulacaktır.Article Citation - WoS: 4Impact of Window-To Surface Area for Different Window Glass Types and Wall Orientations on Building Energy Performance: a Case Study for a School Building Located in Izmir, Turkey(Yıldız Teknik Üniversitesi, 2011) Yildiz, Yusuf; Ozbalta, Trkan Goksal; Arsan, Zeynep DurmusThe opaque and transparent surfaces of buildings have an important role in the total percentage of energy loss or gain. Heat loss or gain from windows are dependent on the window-to-wall area ratio, the window glass type, and the type of window frame used. In the concept of energy efficient design, heat loss or gain from windows should be analyzed in detail in the early stages of building design by considering local climatic conditions. This study investigates a school building located in Izmir in Turkey, a city with a hot and humid climate. Various glass types with different glazing characteristics and number of layers, located in different parts of the buildings and with different window-to-wall ratios are analyzed and compared using building the energy analysis program "EnergyPlus". Results indicate that window-to-wall area ratios, wall orientation and glass types are important factors in the building's total energy consumption. When the window-to-wall area ratio is increased from 10% to 60%, the winter heating load of the building decreases in maximum amount on the south side of the building and reduces in minimum amount on the east side of the building. When summer cooling load is investigated the highest increase in energy consumption is found on the south side of the building. On the eastern and western sides of the building the effect of increased energy consumption value remains low. When the total energy consumption (cooling + heating) is considered, it is calculated that the east and west sides have the biggest total effect and the northern wall has the smallest total effect. When low emissivity glass is used instead of double layer glass, in terms of energy consumption the building side order of effect remains the same, although actual values differ. It is therefore clear that using energy analysis programs to analyse different factors within the energy consumption of buildings will be beneficial in creating energy efficient solutions. This can be carried out in the earlier stages of the architectural design of the buildings or at the renovation stages of existing buildings.Article Citation - WoS: 7Investigation of Educational Buildings in Terms of Daylighting Performance(Yıldız Teknik Üniversitesi, 2011) Erlalelitepe, Ilknur; Aral, Duygu; Kazanasmaz, TugceEducational buildings have the priority among other building types in daylight performance studies. There are several reasons for this. Classrooms which are used during the whole day should have sufficient and homogeneously distributed daylight. In insufficient daylight conditions, the use of electrical lighting increases energy consumption. Users' visual comfort should also be assured, and design incorporating natural light requires the analysis of sun protection devices in order to avoid glare and excessive heat. Also, atriums and skylights can be included in the building design with the aim of distributing light equally and in a relatively balanced manner throughout the building. However, lighting schemes are often proposed by architects and professionals who tend to make use of different design tools, and it would be pertinent to investigate whether these tools perform as desired. This study analyses daylight design principles and design elements in educational buildings. It outlines the method which has been used to analyse the daylight performance of buildings. A university building was selected for the field study. Measurements were taken in sample spaces to determine daylight performance. Utilising comparison between standard values and measured values, findings are presented in the form of tables, drawings and figures.Article Efficient Design of Nursing Unit Floors(Yıldız Teknik Üniversitesi, 2009) Kazanasmaz, Z. Tugce; Duzgunes, ArdaHospital designs aim to obtain the lowest possible construction, maintenance and operational costs together with patient satisfaction, comfort and privacy. To satisfy these needs, the efficient design of nursing unit areas becomes considerably important. This study was thus conducted to analyze planimetric design efficiency of nursing unit floors by defining certain floor areas and floor area ratios. To test existing nursing unit floors, quantitative assessments were noted in regard to their planimetric efficiency: the utility value of the built floor area, both in terms of its allocation to patient space (served), support (serving) and circulation space and the relative proportions of these. Results were presented in a comparative table. Of the 15 hospital floor plans analyzed, five satisfied minimum space requirements for patient areas, while another five were in the optimum range for circulation areas. Two were defined as the least efficient, having the lowest patient-to-circulation area ratio.Article Citation - WoS: 7Citation - Scopus: 7The Importance of Internal Heat Gains for Building Cooling Design(Yıldız Teknik Üniversitesi, 2017) Coşkun, Turgay; Turhan, Cihan; Durmuş Arsan, Zeynep; Gökçen Akkurt, GüldenThis paper aims to investigate the effect of internal heat gains on the cooling load of a building. The house occupied by three adult men is selected as the case study for paper. The house is in the third floor of the apartment. The apartment has four flats and it has no insulation around the external walls. The heat dissipation from lighting devices, electrical equipment and the occupants are calculated by using the DesignBuilder v4 Beta release simulation program. The temperature of the house is observed during three weeks by using hobo data loggers and calibration of the measurements is made with respect to weather data file of the flat. Detailed schedule based on time of operation and occupancy is prepared to get more accurate results. Annual energy consumption and cooling load of the house is determined by using the dynamic simulation program.