TR Dizin İndeksli Yayınlar / TR Dizin Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7149
Browse
14 results
Search Results
Now showing 1 - 10 of 14
Article Development of Chemometrics Method Based on Infrared Spectroscopy for the Determination of Cement Composition and Process Optimization [article](ACG Publications, 2022) Özdemir, Durmuş; Gümüş, Mehmet Gökhan; Tepeli, DilekIn combination with a multivariate calibration method, FTIR-ATR spectroscopy was presented as a rapid method for the determination of some major oxides (CaO, SiO2, Al2O3, Fe2O3) and minor oxides (MgO, SO4, Na2O, and K2O) in diverse materials (raw material, raw meal, additives, clinker, and types of cement) in cement manufacturing. The FTIR spectroscopy based multivariate models were generated by taking X-ray fluorescence (XRF) as a reference method. Among a number of spectral preprocessing methods, extended multiplicative scatter correction (EMSC) yielded the best PLS models. The standard error of prediction (SEP) for the optimal FTIR based PLS models ranged from 0.10 to 2.07 (w/w%), and the regression coefficient (R2) ranged from 0.95 to 0.99 for PLS predicted vs XRF reference plots. Statistical evaluation of the both methods was carried out by paired t-test at the 95% confidence level and the results showed that the FTIR-ATR combined with PLS model results are consistent with the XRF reference measurements for all the oxides studied. Compared to the XRF method, which can take anywhere from a few minutes to an hour for each measurement, the proposed method is faster, cheaper, and safer. The presented technology also allows rapid monitoring of a cement factory production line.Article Citation - WoS: 1Citation - Scopus: 2A Molecularly Imprinted Polymer as Solid Phase Extraction Sorbent for Ketoprofen Determination in Water and Artificial Serum Prior To Hplc(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2022) Shahwan, Talal; Gürel Özyurt, Elif; Özyurt, Ömer; Ölçer, Yekta Arya; Eroğlu, Ahmet Emin; Boyacı, EzelKetoprofen (KET) is an active pharmaceutical compound that has pain relieving and antipyretic effects. Its determination in body fluids and environmental waters is important due to widespread use of the compound. In this study, a selective and reliable method has been developed for the determination of ketoprofen in water and artificial serum using molecularly imprinted polymers (MIPs) as a solid phase extraction sorbent prior to HPLC-DAD detection. The MIP was synthesized by copolymerization of methacrylic acid (MAA) and trimethylpropane trimethacrylate (TRIM) in the presence of ketoprofen as the template. For the sake of comparison, nonimprinted polymer (NIP) was also synthesized under the same experimental conditions without the addition of ketoprofen under the same experimental conditions. Critical extraction parameters such as sample pH, shaking time and sorbent amount were optimized and adjusted to 8.0, 24 h, and 10.0 mg, respectively, for a sample volume of 10.0 mL. MIP showed higher selectivity than NIP towards ketoprofen in an artificial matrix containing another pain relieving drug, ibuprofen, and a cardiovascular drug, metoprolol. The proposed method was successfully applied for the detection of ketoprofen in spiked drinking water, tap water, and artificial serum samples, and showed satisfactory results with respective recoveries of 96.8 % (± 0.8), 93.7% (± 0.6), 62.2% (± 0.6), and 69.9% (± 0.6).Letter Prof. Dr. O. Yavuz Ataman(TÜBİTAK, 2021) Eroğlu, Ahmet EminProf. Dr. O. Yavuz Ataman passed away on August 15, 2020, in Ankara. He was an academic as well as a social figure throughout his life. He had remarkable achievements in academy as a researcher, an educator, and an administrator. He was known for his unique approaches to the events in all aspects of life. With his beloved character, he was really special. With Prof. Ataman's passing away, the chemistry and especially analytical chemistry community have lost a very special member.Article Determination of Triacylglycerol Composition of Ayvalık and Memecik Olive Oils During Storage by Chemometric Methods(Sakarya Üniversitesi, 2017) Köseoğlu, Oya; Sevim, Didar; Özdemir, DurmuşThe aim of present investigation is to discriminate two important Turkish olive cultivars (Ayvalık and Memecik) by studying their triacylglycerol (TAG) compositions during storage (15 months) taken from different orchard in Ayvalık and Aydın region which have a significant potential for olive oil production in Turkey, during 2009 and 2010 harvest years. Olives were harvested by hand at 2 different maturation indices and processed by an Abencor system. The olive oil samples were stored at room temperature and they were divided into two groups including exposed to diffused daylight and dark for a period of 15 months. Multivariate classification and clustering were done by the application of unsupervised chemometrics methods such as principal component analysis (PCA) and hierarchical cluster analysis (HCA) based on the TAG profiles of the olive oil samples. PCA and HCA analysis of olive oils showed significant differences according to harvest years and cultivars. PCA scores plot showed that the samples were classified into two main groups with respect to harvest years based on the first principal component (PC1). In terms of storage effect, there was no significant change in TAG compositions among the samples from beginning of storage to 15 months of storage regardless of storage conditions (either in dark or in daylight). In addition, PCA scores plot indicated that the samples were also successfully clustered into two sub-groups according to cultivars in both years based on the second principal component (PC2).Article Extraction and Characterization of Pectin From Fresh Globe Artichoke and Canned Artichoke Waste(Gıda Teknolojisi Derneği, 2017) Ceylan, Çağatay; Bayraktar, Oğuz; Atçı, Erhan; Sarrafi, ŞahinThe pectin contents of fresh globe artichoke (stem, receptacle, and bract) and waste of artichokecanning industry were investigated. The highest pectin amount was found in the stem part of freshglobe artichoke (6.42%) with the highest amount of anhydrogalacturonic acid (AGA) and anhydrouronicacid (AUA) content. The pectin yields of receptacle and bract parts were found to be 5.31 and 4.55%,respectively. The pectin yield from the industrial waste was the lowest, 4.43%. The highest ash content(5.65 %) along with the lowest anhydrouronic acid amount (73.28%) indicated the lowest purity for theindustrial waste. The degrees of esterification for the pectin obtained from the stem, receptacle andbract parts were 55.26%, 52.26%, and 56.17%, respectively indicating the presence of high methyl-esterified(HM) pectin. The pectin from the industrial waste had the lowest degree of esterification (46.02%). TheFTIR results indicated that acid processing affected the structural properties of pectin from the industrialwaste with higher methoxyl content and esterification degree.Article Nonlinear Inorganic Optical Materials(Ege Üniversitesi, 1999) Topaloğlu, IşılTicari olarak uygulamaları bulunan nonlinear optik materyallerin geliştirilmesi için yapılmakta olan çalışmalar özellikle 1980 yılından sonra artış göstermiştir. Bu amaçla incelenen sistemler arasında inorganik kristaller, yarı iletkenler, organometalik bileşikler, organik kristalin monomerler, ve delokalize $\Pi$ elektronları içeren uzun zincirli polymerler Informasyon işlemlerinde optik çevirme, telekominikasyon, optoteknoloji, ve optik frekans çevirme amaçlı olarak çok yaygın olarak kullanılmaktadır. Bu derleme makalesinde nonlinear optik özellik gösteren inorganik bileşikler hakkında kısa bilgi verilmiştir.Article Determination of Bitterness Index (k225) and Total Fenol Content of Olive Oils Obtained With Different Regions, Varieties and Processing Systems(Ege Üniversitesi, 2018) Köseoğlu, Oya; Sevim, Didar; Dural, Mehmet Ulaş; Özdemir, DurmuşIn this work the effect of different growing areas on olive (Ayvalık, Memecik, Gemlik, Beylik, Edincik Su, Girit, Kilis Yağlık, Sarı Ulak, Tavşan Yüreği, Topak Aşı) oil bitterness index (K225) were studied at the South Marmara, South and North Aegean, West and East Mediterranean Regions at two, two and a half (2.5), and three phase extraction system, during 2014/2015 crop season. A total of 41 virgin olive oils samples were collected from these Regions. Total phenol content and bitternes index (K225) were analyzed in the research. A Solid-Phase Extraction procedure were carried out for extraction of the bitter compounds. The results of total phenol content and K225 values showed that the Beylik olive oil was determined with the highest total phenol conent and bitterness index (K225) with 330.26 mg CAE kg-1 oil and 1.21 at 2.5 phase extraction system from Manavgat at the West Mediterranean Region, respectively. After the Beylik variety, the highest total phenol content was determined Ayvalık and Edincik Su olive oil with 291.03 and 270.62 mg CAE kg-1 oil, respectively. The Memecik and Ayvalık olive oil bitterness index (K225) was determined 0.86 and 0.85 at two phase extraction system from Muğla and Burhaniye at the South and North Aegean, respectively.Article Citation - WoS: 1Citation - Scopus: 1Comparative Proteomic Analysis of Bacillus Thuringiensis Wild-Type and Two Mutant Strains Disturbed in Polyphosphate Homeostasis(TUBITAK, 2018) Yeşilırmak, Filiz; Doruk, Tuğrul; Yılmaz, Şerif; Tunca Gedik, SedefPolyphosphate polymer (polyP) plays a very important role in every living cell. Synthesis of this linear polymer of phosphate (Pi) residues is catalyzed by the polyphosphate kinase (PPK) enzyme. It was shown that high levels of intracellular polyphosphate stimulated endotoxin production by Bacillus thuringiensis subsp. israelensis (Bti). In this study, proteomic analysis of the wild-type and two mutant strains, overexpressing the ppk gene (Bti pHTppk) and without the ppk gene (Bti ∆ppk), were used to clarify the relation between polyP and endotoxin production. Intracellular proteins were separated by two-dimensional gel electrophoresis; 41 spots of interest (proteins differentially expressed) were obtained and 35 of them were identified by mass spectrometry. Analysis of the protein profiles showed that there is a general decrease in the expression levels of proteins related with energy metabolism, amino acid metabolism, and purine biosynthesis in both Bti pHTppk and Bti ∆ppk. Gluconeogenesis and fatty acid metabolism were also slowed down in both strains, whereas expression of stress response proteins increased compared to the wild-type. These results suggested that changes in polyP concentration cause a general stress condition inside the cell, which in turn stimulates secondary metabolite synthesisArticle Reactions of the Solvent-Stabilized Compound [moocl2(thf)2] With Aromatic Nitrogen Donor Ligands: Spectroscopic Characterization and Semiempirical Am1* Calculations(TUBITAK, 2009) Kılıçkaya, Gülşah; Doğan, Başak; Acar, Nursel; Sözüer, Hikmet IşılReaction of the solvent-stabilized dioxo-molybdenum(VI) compound [MoO2 Cl2 (THF)2]withP Ph3 yielded the oxomolybdenum(IV) species [MoOCl2 (THF)2](1) by the removal of one oxygen atom as PPh3 O. The complexes [MoOCl2 (=NC6 H4 CN)] 2,[MoOCl2 (CNC6 H4 OH)] 3,[MoOCl2 (=NC6 H4 NH2)] 4,and [MoOCl2 (=NC6 H4 OCH3)] 5, were synthesized by the reactions of [MoOCl2 (THF)2]with XC6 H4 Y(X =NH2, Y = CN; X= CN, Y = OH; X = Y = NH2;X=NH2,Y=OCH3). All the new compounds were characterized by elemental analyses, and FTIR, UV-Vis, and 1 H and 13 C-NMR spectra. Geometrical parameters and molecular orbital calculations showed that compounds 2-5 are stabilized by a charge transfer between the Mo center and the phenyl ring.Article Citation - WoS: 16Citation - Scopus: 19Application of Experimental Design on Determination of Aluminum Content in Saline Samples by Adsorptive Cathodic Stripping Voltammetry(TUBITAK, 2013) Yılmaz, Sinan; Öztürk, Betül; Özdemir, Durmuş; Eroğlu, Ahmet Emin; Ertaş, Fatma NilAdsorptive cathodic stripping voltammetric determination of aluminum at ng mL-1 levels in salt samples based on the metal complexation with Calcon (1-(2-hydroxynaphthylazo)-2 naphthol-4-sulfonic acid) and the subsequent adsorptive deposition onto a hanging mercury drop electrode was studied. Central composite design was used as a design method. Several chemical and instrumental parameters (pH, ligand concentration, deposition time, deposition potential, and complexing time) were involved in the experimental design. Analytical parameters such as repeatability, linearity, and accuracy were also investigated and the detection limit was found as 0.32 ng mL-1.