TR Dizin İndeksli Yayınlar / TR Dizin Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7149
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Effect of Temperature on Stability of Lipid Microbubbles(Turkish Chemical Society, 2019) Kılıç, SevgiThe effect of temperature on stability of lipid microbubble shell containing polyethyleneoxide-40-stearate (PEG40St) as emulsifier was investigated. Microbubbles at 4 °C were subjected to different temperatures up to 48 ºC (down-to-up) and it was found that both the number and the size of microbubbles remained unchanged in the population up to a certain time, so called “onset time”. The onset time was about 6 hours at 10 °C, 2 hours at 20 °C and shorter at elevated temperatures, exhibiting an exponential decrease with increasing temperature. Once the onset time was reached, the number of microbubbles started to decrease and the average size of the population started to increase. Observation of single microbubbles on a constant temperature heating stage exhibited that each microbubble had its own onset time, with the smaller microbubbles vanishing earlier than the larger ones. The Langmuir monolayer studies showed that hydration degree of the emulsifier PEG chains decreased with temperature, causing them go through conformational changes and subsequently destabilization of the shell. By subjecting the freshly produced microbubbles directly to the desired temperatures in up-to-down fashion, more stable microbubbles were able to be produced, with their onset time increased 40% at 10 °C to 500% at 38 °C. Overall, the results suggest that the new strategies need to be developed to control the collapse process in the microbubble shell resulting from the conformational changes in the PEG chains of the emulsifier for the design of more stable microbubbles. © 2019, Turkish Chemical Society. All rights reserved.Article Citation - Scopus: 1Synthesis of Stable Nano Calcite(Turkish Chemical Society, 2018) Kılıç, SevgiSynthesis of calcium carbonate (CaCO3) particles in the presence of a population of carbon dioxide (CO2) bubbles was investigated in the calcium hydroxide (Ca(OH)2) solution, which is a natural stabilizer for CaCO3. Possible chemical speciation reactions were presented for an inorganic synthesis of hollow nano-CaCO3 particles. In the progress of CaCO3 synthesis, some of the particles started to dissolve at their edges and turned into hollow nano-CaCO3 particles. Some of the pores closed at the end of crystallization as a result of dissolution-recrystallization mechanism. Hollow nano-CaCO3 particles with sizes of about 300 nm were synthesized with a narrow size distribution. It was concluded that the hollow nano-CaCO3 particles could be advantageous due to lower weights and higher surface areas.Article Citation - Scopus: 7Binder Effect on Electrochemical Performance of Zinc Electrodes for Nickel-Zinc Batteries(Turkish Chemical Society, 2018) Ebil, Özgenç; Cihanoğlu, GizemPolyethylene glycol (PEG) and polyvinyl alcohol (PVA) were used as a zinc electrode binder at different concentrations to enhance the electrochemical behavior of zinc electrodes for nickel-zinc (NiZn) batteries. ZnO powders synthesized by mechanochemical and hydrothermal precipitation methods were mixed with lead oxide, calcium hydroxide and binder to prepare zinc electrodes in pouch cell NiZn batteries. Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) analysis reveal that initial morphology of zinc electrode changes drastically regardless of the binder type and its loading after charge/discharge process, and even the charge/discharge process is not complete. The results show that the presence of PEG causes better discharge capacity compared to that of PVA as a binder. Zinc electrode prepared using commercial ZnO powder and 3 wt.% PEG gives the optimum discharge capability, with a specific capacity of approximately 311 mAhg-1, while zinc electrodes prepared using ZnO powder synthesized from ZnCl2 and Zn(NO3)2.6H2O and 6 wt.% PEG exhibit high specific energy of 255 and 275 mAhg-1, respectively. The results suggest a relationship between binder loading and battery capacity, but in-situ analysis of microstructural evolution of zinc electrode during charge/discharge process is needed to confirm this relationship.Article Citation - Scopus: 5Nano Zinc Borate as a Lubricant Additive(Turkish Chemical Society, 2018) Savrık, Sevdiye Atakul; Üstün, Fatma; Alp, Burcu; Balköse, DevrimLubricants consist of base oils and chemical additives such as dispersants, surfactants, oxidation inhibitors, and antiwear agents. Organic and inorganic boron-based additives increase wear resistance and decreases friction. Hexagonal boron nitride and metal borates are used for this purpose. Zinc borate is a synthetic hydrated metal borate. The production techniques of zinc borate generally include the reaction between zinc source materials (zinc oxide, zinc salts, zinc hydroxide) and the boron source materials (boric acid and borax). The nano zinc borate particles were prepared from zinc nitrate and borax in the present study by using low initial zinc and borate concentrations and low temperature to prevent particle growth. The templates span 60 and PEG 4000 were used to control the particle size. The particles were separated from mother liquor by centrifugation, washed with ethanol, dried and ground and used as additive to base oil. The particles have H2O and B(3)-O vibrations in their FTIR spectra. The empirical formula of the nanoparticles was approximately 3ZnO.2B2O3.4H2O from EDX and TGA analysis. X-ray diffraction diagram indicated the particles were in amorphous state. When the nanoparticles were added to light neutral oil the wear scar diameter and friction coefficient was lowered 50% and 20% respectively.Article Citation - Scopus: 1Enhancement of Cerium Exchange With Ultrasound(Turkish Chemical Society, 2018) Çakıcıoğlu Özkan, Fehime; Erten Kaya, YaseminIn this study the effect of ultrasound of the cerium exchange was studied. The results were compared to those obtained from traditional batch exchange method. Contact time, initial cation concentration (fold equivalent excess) and the types of the ultrasound were studied. Ultrasonic probe, which is the most effective method, enhanced the replacement of Na+ ion with Ce3+ ion in the extra-framework of zeolite up to 73 % by applying 5 consecutive ion exchanges. The cerium in the solution caused to be formed cerium oxides on the crystal surface occluding the pores. Thus the specific surface area of cerium exchanged zeolite was decreased due to formation of cerium complexes on the surface and into the pores. © 2018, Turkish Chemical Society. All rights reserved.