Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
7 results
Search Results
Book Part Citation - Scopus: 3Tissue Engineering Applications of Marine-Based Materials(Springer, 2022) Polat, Hürriyet; Zeybek, Nuket; Polat, MehmetTissue engineering is a promising approach in replacing or improving tissues lost or has become nonviable due to disease or trauma by the use of scaffold materials by combining engineering and biochemical/physicochemical methods. Its purpose is to create suitable matrices that support cell differentiation and proliferation toward the formation of new and functional tissue. Marine-based natural compounds are potential scaffold feedstock material in tissue engineering owing to their biocompatibility and biodegradability while providing excellent biochemical/physicochemical properties. Numerous application areas and various fabrication routes techniques described in the literature attest to the importance of these materials in tissue regeneration. This review has been carried to merge the information from a large number of studies on the marine-based scaffold materials in tissue engineering into a coherent summary. © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2022.Article Citation - WoS: 7Citation - Scopus: 7Modification of Grape Pulp With Citric Acid for the Production of Natural Ion Exchanger Resin and Removal of Pb (ii) and Cd (ii) From Aqueous Solutions: Kinetic, Thermodynamics, and Mechanism(Springer, 2021) Arslanoğlu, Esra; Eren, Muhammet Ş. A.; Arslanoğlu, Hasan; Çiftçi, HarunIn this study, grape pulp (MGP) modified with NaOH and citric acid was used in the production of natural ion exchangers. The effects of parameters such as initial pH, MGP dosage, temperature, initial metal ion concentration, and contact time on the removal of Pb (II) and Cd (II) ions from aqueous solutions using modified materials were investigated by batch experiments. It was found that the experimental kinetic data fit the second-order model, and the activation energy for Pb (II) and Cd (II) adsorption processes were 20.68 and 38.61 kj mol(-1), respectively. Although the initial adsorption rate increases with increasing temperature, the adsorption efficiency slightly decreases. It was calculated that the equilibrium data fit the Langmuir isotherm better, and the maximum adsorption capacities for Pb (II) and Cd (II) adsorption processes were approximately 1.496 and 1.022 mmol g(-1) at 25 degrees C, respectively. Thermodynamic analysis has shown that the adsorption processes of Pb (II) and Cd (II) are exothermic (Delta H degrees(Pb) = -35.68 kj mol(-1), Delta H degrees(Cd) = -21.19 kj mol(-1)) and have a self-developing character.Article Citation - WoS: 15Citation - Scopus: 17Fabrication, Characterization, and Adsorption Applications of Low-Cost Hybride Activated Carbons From Peanut Shell-Vinasse Mixtures by One-Step Pyrolysis(Springer, 2021) Arslanoğlu, Esra; Eren, Muhammet Şakir Abdullah; Arslanoğlu, Hasan; Çiftçi, HarunThe present work aims to develop an innovative, alternative, fast, and cost-effective one-step pyrolysis method for activated carbon production using peanut shell and vinasse mixture. This facile procedure is based on single-step carbonization treatment at a temperature range of 400-800 degrees C. Different carbonization time (15-360 min), impregnation ratio (1-3 g/g), impregnation time (3-24 h), and nitrogen flow rate (300 and 600 ml/min) were examined. The chemical and physical properties of the activated carbon examined by SEM-EDX, FT-IR analysis, particle size distribution, iodine number, pH(zpc), BET surface area, and surface functional group analysis by Boehm's titration. The results illustrate that the values of BET surface area, total pore volume, average pore diameter, iodine number, pH(zpc), and carbon content of activated carbon were found as 1290.5 m(2)/g, 0.5667 cm(3)/g, 21.2 angstrom, 1258.4 mg/g, 5.7, and 86.89%, respectively.Article Citation - WoS: 13Citation - Scopus: 14Robust Fluorinated Siloxane Copolymers Via Initiated Chemical Vapor Deposition for Corrosion Protection(Springer, 2021) Cihanoğlu, Gizem; Ebil, ÖzgençHomopolymers of 2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (V4D4), 2-(perfluorohexyl)ethyl acrylate (PFHEA) and 2-(perfluoroalkyl)ethyl methacrylate (PFEMA) and their copolymers were synthesized via initiated chemical vapor deposition (iCVD). All coatings exhibited excellent adhesion to substrates. The corrosion resistance of iCVD coatings was investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements. In addition, chemical durability of various organic solvents and adhesion to the substrate were also evaluated. Tafel polarization measurements in 5 wt% NaCl solution revealed that the corrosion rates as low as 0.002 mpy on zinc substrates can be reached with 250-nm-thick iCVD-synthesized polymers which is lower than previously reported polymer coatings and more than three orders of magnitude lower than bare zinc. EIS analysis coupled with equivalent electric circuits model confirmed that poly(V4D4) and poly(PFHEA) homopolymers show extremely high protection efficiencies (similar to 99%) on zinc, while poly(V4D4-co-PFHEA) copolymer with slightly lower corrosion efficiency (85-91%) provides a better anticorrosion barrier with weight loss reduction by 57 and 45% for copper and zinc, respectively, and with improved chemical and mechanical properties. The results indicate that iCVD process enables fabrication of finely tuned fluorinated siloxane copolymer conformal coatings for corrosion protection on a variety of substrates.Article Citation - WoS: 25Citation - Scopus: 26Phosphorylated Hazelnut Shell Waste for Sustainable Lithium Recovery Application as Biosorbent(Springer, 2021) Recepoğlu, Yaşar Kemal; Yüksel, AslıHazelnut shell waste was phosphorylated to develop a novel biosorbent based on natural renewable resource for the recovery of lithium from aqueous solution. For the synthesized biosorbent, the surface morphology and mapping by SEM-EDS, chemical properties by FTIR, elemental analysis by XPS, specific surface area by BET, crystallinity by XRD and thermal properties by TGA were elucidated elaborately. The influence of biosorbent dosage, initial concentration, temperature, contact time, pH and coexisting ions were investigated. The equilibrium sorption capacity reached 6.03 mg/g under optimal conditions (i.e., biosorbent dosage of 12.0 g/L, initial Li concentration of 100 mg/L, pH value of 5.8, sorption temperature of 25 degrees C, and sorption time of 6 min). According to the sorption behavior of the phosphorylated hazelnut shell waste the Freundlich model proved to be more suitable than the Langmuir model indicating maximum sorption capacity as 7.71 mg/g at 25 degrees C. Thermodynamic parameters obtained by different isokinetic temperatures disclosed that the ion exchange reaction was feasible, spontaneous, and exothermic where the interaction between biosorbent surface and solvent plays an important role. A preliminary test on the Li recovery from geothermal water was also performed to check its applicability in a real brine. Desorption studies at 25 degrees C revealed that relatively higher desorption efficiency and capacity were achieved at 97.4% and 5.93 mg/g, respectively with a 1.0 M H2SO4 among other regenerants (i.e., HCl and NaCl). Concentrations of Li and the other cations were determined via ICP-OES. Due to such outstanding features, the novel phosphorylated hazelnut shell waste had great potential for lithium recovery from aqueous solution by being added value as a waste and recovering a strategic element of modern life simultaneously. [GRAPHICS] .Article Citation - WoS: 34Citation - Scopus: 39Aptamer-Based Electrochemical Biosensing Strategy Toward Human Non-Small Cell Lung Cancer Using Polyacrylonitrile/Polypyrrole Nanofibers(Springer, 2020) Kıvrak, Ezgi; İnce Yardımcı, Atike; İlhan, Recep; Ballar Kırmızıbayrak, Petek; Yılmaz, Selahattin; Kara, PınarIn the present study, a sensitive electrochemical aptamer-based biosensing strategy for human non-small cell lung cancer (NSCLC) detection was proposed using nanofiber-modified disposable pencil graphite electrodes (PGEs). The composite nanofiber was comprised of polyacrylonitrile (PAN) and polypyrrole (PPy) polymers, and fabrication of the nanofibers was accomplished using electrospinning process onto PGEs. Development of the nanofibers was confirmed using scanning electron microscopy (SEM). The high-affinity 5 '-aminohexyl-linked aptamer was immobilized onto a PAN/PPy composite nanofiber-modified sensor surface via covalent bonding strategy. After incubation with NSCLC living cells (A549 cell line) at 37.5 degrees C, the recognition between aptamer and target cells was monitored by electrochemical impedance spectroscopy (EIS). The selectivity of the aptasensor was evaluated using nonspecific human cervical cancer cells (HeLa) and a nonspecific aptamer sequence. The proposed electrochemical aptasensor showed high sensitivity toward A549 cells with a detection limit of 1.2 x 10(3)cells/mL. The results indicate that our label-free electrochemical aptasensor has great potential in the design of aptasensors for the diagnostics of other types of cancer cells with broad detection capability in clinical analysis.Conference Object Investigation of Therapeutic Effects of Doxorubicin Loaded Microbubbles in In-Vivo Breast Cancer Model(Springer, 2017) Serinan, Efe Özgür; Barış, Mustafa; Kürkçü, Gülşah; Önercan, Cansu; Çalışır, Meryem; Altun, Zekiye; Aktaş, Safiye; Aydın, Melek; Kılıç Özdemir, Sevgi; Yılmaz, Osman; Özdemir, Ekrem[No abstract available]