Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
58 results
Search Results
Conference Object Citation - WoS: 1Citation - Scopus: 1A Mixed-Integer Dynamic and Stochastic Algae Process Optimization(Elsevier, 2024) Kivanc, Sercan; Deliismail, Özgün; Şıldır, HasanWith increased energy demand as it gets scarcer, a great deal of research is being carried out into alternatives to non - renewable energy resources. One of the promising studies is the biofuel production from micro algae. Microalgae are photosynthetic organisms and capture carbon dioxide, reducing emissions and providing valuable products (fuel, fertilizer, etc.). Thus, efficiency in the design and optimization of process related units are important. In this study, the optimal experimental conditions for Nannochloropsis Oculata were calculated under the constraints of the model equations and other process related constraints through simultaneous optimization approach. The economic evaluation of the process is also handled by introducing the uncertainty in the economic measures sampled from normal distribution to maximize the average profit. Unlike traditional approaches, the MINLP formulation, which is solved stochastically, dynamically, and simultaneously, provides more robust and reliable results, flexibility, improved decision making, reduced risks to be taken and a better understanding of risk factors. Copyright (C) 2024 The Authors. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0/)Article Citation - Scopus: 2A Comparative Assessment for Efficient Oleuropein Extraction From Olive Leaf (olea Europaea L. Folium)(Murat Yakar, 2023) Recepoğlu, Yaşar Kemal; Gümüşbulut, Gülin; Yüksel Özşen, AslıSince oleuropein has long been known in the health sector and is abundant directly in our country as the fourth largest olive producer, oleuropein, the predominant phenolic ingredient in olive leaves, was recovered in this study using Soxhlet extraction. The effects of different solvent types (acetonitrile, ethanol, methanol, and water), extraction period (4 cycles, 4 h, and 8 h), particle size (250-500 µm and 900-2000 µm), and pretreatment of olive leaves on the yield of oleuropein were examined to determine the maximum yield. A greater oleuropein yield was obtained when the particle size of olive leaves utilized for extraction was lowered. Furthermore, aqueous solvents revealed a higher yield of oleuropein than pure solvents and prolonging the extraction duration resulted in a significant increase in the amount of oleuropein extracted. On the other hand, pretreatment of olive leaves resulted in a reduction in oleuropein output. As a result, with 36% extraction efficiency in terms of olive leaf conversion, the highest oleuropein extraction yield was obtained as 13.35 mg g-1 dry leaf for 8 h of extraction time using olive leaves with a particle size of 250-500 µm and an 80% methanol solution as solvent. © Author(s) 2023.Article Citation - WoS: 4Citation - Scopus: 5Numerical Study of Fluid Flow and Mixing in the Argon Oxygen Decarburization (aod) Process(Iron and Steel Institute of Japan, 2023) Cheng, Zhongfu; Wang, Yannan; Dutta, Abhishek; Blanpain, Bart; Guo, Muxing; Malfliet, AnneliesA three-dimensional (3D) model has been developed based on the Eulerian multiphase flow approach to investigate the fluid flow behavior and mixing efficiency in the multi-tuyere AOD process. The interphase forces, including drag force, lift force, virtual force, turbulent dispersion force, and wall lubrication force, were incorporated into this model. The model was used to simulate six-tuyere and seven-tuyere AOD processes. The phenomena of multi-jet penetration, bubble plume merging, 3D turbulent flow and mixing characteristics were considered. The results indicate that the bubble plume merging occurs in the upper part of the liquid bath, forming a typical plume cluster. The predicted penetration length for a single tuyere jet agrees well with the previous work. For the multi-jet system, the side jets penetrate deeper than the inside ones. The six-tuyere AOD has a good flow condition in the center of the liquid bath, while the seven-tuyere AOD has a better flow pattern in the sidewall region and the lower bath. Overall, the seven-tuyere AOD performs better in mixing efficiency than the six-tuyere AOD under the same gas flow rate. These findings increase the understanding of the AOD process, allowing further optimization of process parameters. This model can be further extended to incorporate the thermochemical reactions into the modeling of the AOD reactor.Article Citation - WoS: 3Citation - Scopus: 4Photocatalytic Degradation of Aquatic Organic Pollutants With Zn- and Zr-Based Metalorganic Frameworks: Zif-8 and Uio-66(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2022) Çalık, Fatma Defne; Erdoğan, Bilgesu; Yılmaz, Esra; Saygı, Gizem; Çakıcıoğlu-Özkan, FehimeWater treatment has been an essential issue with the increasing population over 40 years. Researchers center on the major organic pollutants, such as dyes, pesticides, and pharmaceutical products. Photocatalytic degradation is one of the promising methods for aquatic organic pollutant treatment. Over the years, scientists have been working on developments for photocatalysts to enhance their pollutant degradation performances. From the reviewed studies, it is seen that properties like surface area, chemical, mechanical, and thermal stability, and uniform distribution of active sites are crucial, and an increase in these properties provides better degradation efficiency. In this sense, metal-organic frameworks as photocatalysts can be considered more advantageous. This study focuses on the organic aquatic pollutant degradation studies by using well-known MOFs like ZIF-8 and UiO-66 photocatalysts. Mainly the organic dye (RhB, MB, MO, etc.) degradation efficiencies of ZIF-8 and UiO-66 have been achieved to 100%. Recently, the degradation capacities of various pharmaceuticals such as diazinon, acetaminophen, levofloxacin, and sulfamethoxazole have also been investigated. According to the reviewed studies, ZIF-8 and UiO-66 can be considered remarkable photocatalysts for the degradation of organic pollutants.Article Citation - WoS: 3Citation - Scopus: 3Numerical Study of Electrostatic Desalting: a Detailed Parametric Study(MDPI, 2022) Ramirez-Argaez, Marco A.; Abreú-López, Diego; Gracia-Fadrique, Jesús; Dutta, AbhishekA systematic process analysis was conducted to study the effect of the main variables in an industrial electrostatic desalter, such as electric field intensity, wash water content, droplet size, and oil viscosity, on the efficiency of the separation of water from oil. The analysis was assessed through an already published and validated CFD multiphase numerical model that considers the expression of the frequency of collisions as a function of the mentioned process variables. Additionally, the study allowed the formal optimization exercise of the operation to maximize the separation efficiency. The most significant variables were the initial water content and the electric field intensity, while the temperature (oil viscosity) had an effect to a lower extent. An increase in the electric field and temperature and a decrease in the water content improved the water separation from oil. Optimum values suggested from the factorial experimental design and the optimization implemented in this work indicated the use of an electric field of 3 kV/cm, water content of 3%, and an oil viscosity of 0.017 kg/ms. At the same time, the droplet size showed no significant effect under the conditions explored in this work.Article Citation - WoS: 4Citation - Scopus: 5Co2 Absorption Into Primary and Secondary Amine Aqueous Solutions With and Without Copper Ions in a Bubble Column(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2022) Yousefzadeh, Hamed; Güler, Cansu; Erkey, Can; Uzunlar, ErdalChemical absorption of CO2 into aqueous amine solutions using a nonstirred bubble column was experimentally investigated. The performance of CO2 absorption of four different primary and secondary amines including monoethanolamine (MEA), piperazine (PZ), 2-piperidineethanol (2PE), and homopiperazine (HPZ) were compared. The effects of initial concentration of amine, the inlet mole fraction of CO2, and solution temperature on the rate of CO2 absorption and CO2 loading (mol CO2/mol amine) were studied in the range of 0.02–1 M, 0.10–0.15, and 25–40 °C, respectively. The effect of the presence of copper ions in the amine solution on CO2 loading was also studied. By comparison of the breakthrough curves of the amines at different operational conditions, it was revealed that the shortest and longest time for the appearance of the breakthrough point was observed for MEA and HPZ solutions, respectively. CO2 loading of MEA, 2PE, PZ, and HPZ aqueous solutions at 25 °C, 0.2 M of initial concentration of amine, and 0.15 of inlet mole fraction of CO2 were 1.06, 1.14, 1.13, and 1.18 mol CO2/mol amine, respectively. By decreasing the inlet mole fraction of CO2 from 0.15 to 0.10, CO2 loading slightly decreased. As the initial concentration of amine and temperature decreased, CO2 loading increased. Also, the presence of copper ions in the absorbent solution resulted in a decrease in the CO2 loading of MEA and HPZ aqueous solutions. In case of PZ and 2PE amines, adding copper ions led to precipitation even at low copper ion concentrations.Article Citation - WoS: 13Citation - Scopus: 17Characterization and Beneficiation of Ethiopian Kaolin for Use in Fabrication of Ceramic Membrane(IOP Publishing, 2021) Zewdie, Tsegahun Mekonnen; Prihatiningtyas, Indah; Dutta, Abhishek; Habtu, Nigus Gabbiye; Van der Bruggen, BartKaolin (china clay) is a rock material that is very rich in kaolinite. A kaolin ore from Debre Tabor, Ethiopia containing 59.2 wt% SiO2, 24.9 wt% Al2O3, 2.4 wt% Fe2O3, and 8.22 wt% loss on ignition (LOI) was physically beneficiated, chemically leached, and thermally treated for possible industrial use, especially for ceramic membrane fabrication. The leaching experiments were carried out using oxalic acid solutions as leaching reagents for the iron extraction process. The effect of acid concentration, reaction temperature, and contact time on iron leaching was investigated. It was determined that the rate of iron extraction increased with the oxalic acid concentration, leaching temperature, and contact time. A substantial reduction of iron oxide (2.4 to 0.36 wt%) from the raw kaolin was observed at operating conditions of 2.0 M oxalic acid, the temperature of 120 degrees C, and contact time of 120 min. A maximum kaolin whiteness index of 81.4% was achieved through this leaching process. Finally, the physically beneficiated, chemically leached, and thermally treated kaolin raw material was used to fabricate a low-cost kaolin-based ceramic membrane. After firing at 1100 degrees C the ceramic membrane was found to have a mass loss of 11.04 +/- 0.05%, water absorption of 8.9 +/- 0.4%, linear shrinkage of 14.5 +/- 0.05%. It was demonstrated to be chemically stable, having less than 3% mass loss in acid solution, and less than 1% mass loss in alkali solution. The newly developed membranes have thus properties comparable to commercial ceramic membranes.Article Citation - WoS: 1Citation - Scopus: 1Selective Catalytic Hydrogenation of Cellulose Into Sorbitol With Ru-Based Catalysts(TÜBİTAK, 2022) Orak, Ceren; Sapmaz, Aycan; Yüksel, AslıSorbitol is one of the platform chemicals and can be produced from various renewable and sustainable sources via different processes. Hydrothermal liquefaction is an effective and promising approach to produce sorbitol, since the subcritical reaction media and appropriate catalysts provide a selective production of platform chemicals. In this study, sorbitol was produced from different renewable sources (cellulose and glucose) in the presence of Ru-based catalysts (Ru/SiO2, Ru/AC, Ru/SBA-15, and Ru/SBA-15-SO3) under subcritical conditions. The highest cellulose conversion was achieved as 90% in the presence of Ru/SBA-15-SO3 for 1 h of reaction duration. The highest sorbitol yield (%) by hydrothermal liquefaction of cellulose was obtained as 6.2% by using Ru/AC for 1 h of reaction duration. A total of 99.9% of glucose conversion was achieved in the presence of all catalysts. The highest sorbitol yield (%) by hydrothermal liquefaction of glucose was found as 3.8% for 1 h of reaction duration. Owing to the results of GC-MS analysis, the intermediate products were identified, and, thus, a reaction pathway was proposed.Editorial Citation - WoS: 1Citation - Scopus: 1Special Issue on “process Modeling in Pyrometallurgical Engineering”(MDPI, 2021) Saxen, Henrik; Ramirez-Argaez, Marco A.; Conejo, Alberto N.; Dutta, AbhishekThis Special Issue on “Process Modeling in Pyrometallurgical Engineering” consists of 39 articles, including two review papers, and covers a wide range of topics related to process development and analysis based on modeling in ironmaking, steelmaking, flash smelting, casting, rolling operations, etc. The approaches include small-scale experiments and experimental design, first-principles modeling, detailed modeling based on CFD or DEM, and statistical and machine-learning-based methods. In the following paragraphs the issue is briefly scanned, presenting the papers in the order roughly following the route from raw materials processing to rolling and heat treatment.Article Citation - WoS: 5Citation - Scopus: 5Evaluation of Liposomal and Microbubbles Mediated Delivery of Doxorubicin in Two-Dimensional (2d) and Three-Dimensional (3d) Models for Breast Cancer(Galenos Publishing House, 2021) Aydın,M.; Özdemir,E.; Altun,Z.; Kılıç,S.; Aktaş,S.Objective: Liposomal cancer treatment strategies are useful in removing the side effects that were the main concern in recent years. In this study, we prepared microbubble (MBs) conjugated with DOX-loaded liposomes (DOX-loaded MBs) and investigated their effectiveness in in vitro breast cancer cells in two dimensions (2D) and three dimensions (3D). Materials and Methods: With this aim, breast cancer cells with different features (4T1, MDA-MB231, MCF-7) were growth in 2D and 3D dimensions. The cytotoxic and cell death effects under different conditions, durations and doses were evaluated with WST-1, trypan-blue, colony counts. Apoptotic effects were investigated with flow cytometric Annexin-V-PI and immunohistochemical (Ki-67, caspase 3, 8, 9) methods. Results: After free DOX and LipoDOX were applied, the proliferation index of three cell lines reduced. Intrinsic and extrinsic apoptotic pathways were activated in both 2D and 3D models. However, this effect was observed at lower levels in the 3D model due to the difficulty of diffusion of DOX into the spheroids. Additionally, the suitability of the 3D model for breast cancer cells was supported by formation of ductus-like structures and spheroids. Cell deaths were not observed significantly with the DOX-loaded microbubbles due to rising of MBs to the surface and not reaching spheroids held in matrigel of 3D model. Conclusion: DOX and LipoDOX showed anti-proliferative and apoptosis-inducing effects in breast cancer cells. However, these effects indicated variability depending on the cell lines and 2D or 3D model types. ©Copyright 2021 by the the Turkish Federation of Breast Diseases Societies.