Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
19 results
Search Results
Article Pomza ve Nsdd-pomza ile Sabit Yataklı Kolon Reaktörde Metilen Mavisi Giderimi: Deneysel ve Modelleme Çalışması(2019) Balcı, Esin; Ökten, Hatice Eser; Genişoğlu, Mesut; Recepoğlu, Yaşar Kemal; Gören, Ayşegül YağmurNano sıfır değerlikli demir (nSDD) yüksek renk konsantrasyonlarına sahip tekstil atıksularının arıtımında ekonomik ve çevre dostu bir adsorban olarak ortaya çıkmaktadır. Ancak nSDD partikülleri sulu çözeltilerde elektrostatik etkileşimler sebebiyle kolayca topaklaşmakta ve bu da arıtma veriminin düşmesine neden olmaktadır. Dolayısıyla düşük maliyetli, doğal poröz yapıda ve ortalama 2m2/gr spesifik yüzey alanına sahip pomza, nSDD topaklaşmasını önleyici bir malzeme olarak kullanılabilir. Bu çalışmada sadece pomza ve pomzanSDD (ağırlıkça 9:1) karışımının kullanıldığı kolon reaktörde 25, 50, 75 ve 100 mg/L metilen mavisi konsantrasyonları için arıtma verimleri incelenmiştir. Pomzanın ve pomza-nSDD karışımının 100 mg/L metilen mavisi deneyindeki toplam kapasiteleri sırasıyla 2,8 ve 4,2 mg/g-adsorban olarak bulunmuştur. Özellikle düşük konsantrasyonlarda, pomza-nSDD karışımının arıtma performansını önemli ölçüde arttırdığı görülmüştür. Thomas modeli deneysel verilere uygulanmış ve modelin öngörü gücünün düşük konsantrasyonda yüksekken, yüksek konsantrasyonlarda ortalama olduğu kanısına varılmıştır.Article Citation - WoS: 3Citation - Scopus: 3Shallow Shell Ssta63 Resin: a Rapid Approach To Remediation of Hazardous Nitrate(Royal Society of Chemistry, 2024) Cendik, Elif; Saygi, Mugenur; Recepoğlu, Yaşar Kemal; Arar, OzgurThis study examines the potential of Purolite Shallow Shell (TM) SSTA63 anion exchange resin for mitigating nitrate ion (NO3-) contamination in aqueous environments. Through systematic experimentation, including dosage optimization, pH dependency, kinetic and desorption studies, we investigate the sorption behavior and practical applications of the resin. Results indicate that the resin effectively removes NO3- ions, with maximum efficiency achieved within 10 minutes. When 0.025 g of resin was used, 75% of NO3- was removed, whereas with 0.05 g, 89% was removed, and with 0.1 g of resin, 95% was removed. At pH 1, approximately 50% of NO3- ions were removed, with removal efficiency reaching 97% between pH 4 and 10. Sorption isotherms affirm the suitability of the Langmuir model for the current investigation. The monolayer maximum sorption capacity (qmax) value was found to be 53.65 mg g-1. The resin demonstrates robust desorption capabilities using 0.1 M hydrochloric acid (HCl), effectively desorbing NO3- above 99%, indicating easy NO3- desorption and resin regeneration. The presence of coexisting ions such as chloride (Cl-), sulfate (SO42-), and phosphate (PO43-) showed a minimal impact on NO3- removal in individual binary mixtures, with efficiencies exceeding 93%, suggesting a strong selectivity of the resin towards NO3-. Purolite SSTA63 anion exchange resin exhibited a high affinity for NO3- ions, even over other competing ions, despite the general trend of ion exchange resins to favor ions with a higher atomic number and valence. Overall, this resin presents a promising solution for NO3- removal, with implications for water treatment and environmental remediation. This study explores the potential of Purolite Shallow Shell (TM) SSTA63 anion exchange resin for mitigating nitrate ion (NO3-) contamination in aqueous environments.Article Citation - WoS: 4Citation - Scopus: 5Breakthrough Curve Analysis of Phosphorylated Hazelnut Shell Waste in Column Operation for Continuous Harvesting of Lithium From Water(Elsevier, 2024) Recepoğlu, Yaşar Kemal; Arar, Ozguer; Yuksel, AsliIn batch-scale operations, biosorption employing phosphorylated hazelnut shell waste (FHS) revealed excellent lithium removal and recovery efficiency. Scaling up and implementing packed bed column systems necessitates further design and performance optimization. Lithium biosorption via FHS was investigated utilizing a continuous-flow packed-bed column operated under various flow rates and bed heights to remove Li to ultra-low levels and recover it. The Li biosorption capacity of the FHS column was unaffected by the bed height, however, when the flow rate was increased, the capacity of the FHS column decreased. The breakthrough time, exhaustion time, and uptake capacity of the column bed increased with increasing column bed height, whereas they decreased with increasing influent flow rate. At flow rates of 0.25, 0.5, and 1.0 mL/min, bed volumes (BVs, mL solution/mL biosorbent) at the breakthrough point were found to be 477, 369, and 347, respectively, with the required BVs for total saturation point of 941, 911, and 829, while the total capacity was calculated as 22.29, 20.07, and 17.69 mg Li/g sorbent. In the 1.0, 1.5, and 2.0 cm height columns filled with FHS, the breakthrough times were 282, 366, and 433 min, respectively, whereas the periods required for saturation were 781, 897, and 1033 min. The three conventional breakthrough models of the Thomas, Yoon-Nelson, and Modified Dose-Response (MDR) were used to properly estimate the whole breakthrough behavior of the FHS column and the characteristic model parameters. Li's extremely favorable separation utilizing FHS was evidenced by the steep S-shape of the breakthrough curves for both parameters flow rate and bed height. The reusability of FHS was demonstrated by operating the packed bed column in multi-cycle mode, with no appreciable loss in column performance.Article Citation - Scopus: 2A Comparative Assessment for Efficient Oleuropein Extraction From Olive Leaf (olea Europaea L. Folium)(Murat Yakar, 2023) Recepoğlu, Yaşar Kemal; Gümüşbulut, Gülin; Yüksel Özşen, AslıSince oleuropein has long been known in the health sector and is abundant directly in our country as the fourth largest olive producer, oleuropein, the predominant phenolic ingredient in olive leaves, was recovered in this study using Soxhlet extraction. The effects of different solvent types (acetonitrile, ethanol, methanol, and water), extraction period (4 cycles, 4 h, and 8 h), particle size (250-500 µm and 900-2000 µm), and pretreatment of olive leaves on the yield of oleuropein were examined to determine the maximum yield. A greater oleuropein yield was obtained when the particle size of olive leaves utilized for extraction was lowered. Furthermore, aqueous solvents revealed a higher yield of oleuropein than pure solvents and prolonging the extraction duration resulted in a significant increase in the amount of oleuropein extracted. On the other hand, pretreatment of olive leaves resulted in a reduction in oleuropein output. As a result, with 36% extraction efficiency in terms of olive leaf conversion, the highest oleuropein extraction yield was obtained as 13.35 mg g-1 dry leaf for 8 h of extraction time using olive leaves with a particle size of 250-500 µm and an 80% methanol solution as solvent. © Author(s) 2023.Article Citation - WoS: 17Citation - Scopus: 20Polyoxometalate-Based Hybrid Composites in Multi-Functional Wastewater Treatment Applications(Elsevier, 2023) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Orooji, Yasin; Vatanpour, Vahid; Kudaibergenov, Nurbolat; Khataee, AlirezaThe inorganic polyanionic clusters known as polyoxometalates (POMs) have several structural variations at the nanoscale scale. They have many uses in chemistry, materials science, medicine, and other fields. This review considers the developments in treating hazardous contaminants from wastewater using POMs-based compounds. Four main treatment methods using POM-based compounds to remove water pollutants have been developed: adsorption, photocatalytic treatment, Fenton-like treatment, and membrane separation. Moreover, we report the types of POMs, synthesis procedures, strategies performed to modify POM-based compounds, and their appli-cations in wastewater treatment. To promote the development of these compounds for large-scale production and real-scale applications, gaps in knowledge and recent research obstacles are also pointed out. Most research on metal organic complexes (MOCs) based on POM has focused on using these compounds as catalysts, with little focus on their additional uses. The adsorption and photocatalytic efficiency of modified POM-based compounds are attributed to their enhanced contaminant removal efficiency, and recovery of certain POM-based compounds by magnetic separation is presented as a promising option for their recyclability. Among the reviewed studies, the highest adsorption capacity was 1108.9 mg/g, with a removal efficiency of 100 % for acid red dye using poly-[N,N-dimethyl-dodecyl-(4-vinylbenzyl)ammonium chloride] (PIL)-POM. The studies also indicate that the POM-based adsorbents could be effectively reused to remove pollutants and sustain their activity in 3-10 cycles. This review is believed to provide an overview of recent advancements in POM-based compounds for water and wastewater treatment, offers thorough research to anyone interested in learning more about this topic, and acts as a manual for researchers working in this area.Article Citation - WoS: 7Citation - Scopus: 7Insights Into Sustainability of Engineered Carbonaceous Material-Based Technologies for Advanced Cyanide Removal From Wastewater(Elsevier, 2023) Yoon, Yeojoon; Khataee, Alireza; Gören, Ayşegül Yağmur; Recepoğlu, Yaşar KemalCyanide (CN) is a serious concern in industrial and goldmine wastewater. Strict regula-tory standards have been established by various agencies due to the detrimental effects that CN has on human health. Therefore, before discharge to water bodies or land, it is essential to create a sus-tainable model for the safe removal of CN. Carbon-based materials are well known for their adsorption and oxidation features, which can be conducive to CN removal. This paper reviews the relevant literature on the application of modified and unmodified carbon-based materials to CN removal in water; these materials include activated carbon (AC), graphene, graphene oxide (GO), and carbon nanotubes (CNTs). Moreover, CN removal mechanisms and photocatalytic removal of CN are comprehensively discussed, with a particular emphasis on modifying carbon-based materials. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, CN adsorption capacity, and pore volume. Impacts of operational parameters, isotherm models, kinetics, and types of carbon-based materials are also outlined. This study provides insight into the real-scale applicability of carbon-based materials for CN removal from waters. Moreover, this review indicates that essential work on CN removal using carbon-based materials is still needed. Future research should focus on developing modified carbon-based materials to encourage multidisciplinary research. The most crucial gap in the literature is that the studies have been performed on a lab scale. Therefore, further pilot and real-scale applica-tions should be conducted. Overall, the cost assessment, environmental effects, and human health risks of carbon-based materials should be studied in future research to achieve a realistic perspective on applicability on an industrial scale.(c) 2023 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Alexandria University This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Article Citation - WoS: 7Citation - Scopus: 7Cross-Linked Phosphorylated Cellulose as a Potential Sorbent for Lithium Extraction From Water: Dynamic Column Studies and Modeling(American Chemical Society, 2022) Recepoğlu, Yaşar Kemal; Yüksel, AslıPhosphorylated functional cellulose was cross-linked with epichlorohydrin at different ratios because it is a very hydrophilic substance that instantly swells to form a hydrogel when it comes into contact with water. It was aimed to utilize a continuously packed bed column to recover lithium from water under varying operating conditions such as flow rate and bed height. The characterization results confirmed cross-linking based on morphology, structure, surface area, and thermal stability differences. Lithium recovery was more efficient with a low flow rate, but the dynamic sorption process was independent of bed height. The total capacities at the three flow rates with 1.5 cm bed height were 33.56, 30.15, and 25.54 mg g-1, and the total saturation times at the three different bed heights with 0.5 mL min-1 flow rate were 659, 1001, and 1007 min, respectively. Only 15.75 mL of 5% H2SO4 solution was required to desorb approximately 100% of Li from the saturated sorbent.Article Citation - WoS: 31Citation - Scopus: 35Electrochemical Degradation of Methylene Blue by a Flexible Graphite Electrode: Techno-Economic Evaluation(American Chemical Society, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Edebali, Özge; Şahin, Çağrı; Genişoğlu, Mesut; Ökten, Hatice EserIn this study, electrochemical removal of methylene blue (MB) from water using commercially available and low-cost flexible graphite was investigated. The operating conditions such as initial dye concentration, initial solution pH, electrolyte dose, electrical potential, and operating time were investigated. The Box-Behnken experimental design (BBD) was used to optimize the system's performance with the minimum number of tests possible, as well as to examine the independent variables' impact on the removal efficiency, energy consumption, operating cost, and effluent MB concentration. The electrical potential and electrolyte dosage both improved the MB removal efficiency, since increased electrical potential facilitated production of oxidizing agents and increase in electrolyte dosage translated into an increase in electrical current transfer. As expected, MB removal efficiency increased with longer operational periods. The combined effects of operating time-electrical potential and electrical potential-electrolyte concentration improved the MB removal efficiency. The maximum removal efficiency (99.9%) and lowest operating cost (0.012 $/m3) were obtained for initial pH 4, initial MB concentration 26.5 mg/L, electrolyte concentration 0.6 g/L, electrical potential 3 V, and operating time 30 min. The reaction kinetics was maximum for pH 5, and as the pH increased the reaction rates decreased. Consequent techno-economic assessment showed that electrochemical removal of MB using low-cost and versatile flexible graphite had a competitive advantage.Article Citation - WoS: 40Citation - Scopus: 47Boron in Geothermal Energy: Sources, Environmental Impacts, and Management in Geothermal Fluid(Elsevier, 2022) Mott, A.; Baba, Alper; Hadi Mosleh, Mojgan; Ökten, Hatice Eser; Babaei, Masoud; Gören, Ayşegül Yağmur; Feng, C.; Recepoğlu, Yaşar Kemal; Uzelli, Taygun; Uytun, Hüseyin; Morata, Diego; Yüksel Özşen, AslıThe problem of hazardous chemicals in geothermal fluid is a critical environmental concern in geothermal energy developments. Boron is among the hazardous contaminants reported to be present at high concentrations in geothermal fluids in various countries. Poor management and inadequate treatment of geothermal fluids can release excessive boron to the environment that has toxic effects on plants, humans, and animals. Despite the importance of boron management in geothermal fluid, limited and fragmented resources exist that provide a comprehensive understanding of its sources, transport and fate, and the treatment strategies in geothermal energy context. This paper presents the first critical review from a systematic and comprehensive review on different aspects of boron in geothermal fluid including its generation, sources, toxicity, ranges and the management approaches and treatment technologies. Our research highlights the origin of boron in geothermal water to be mainly from historical water-rock interactions and magmatic intrusion. Excessive concentrations of boron in geothermal fluids have been reported (over 500 mg/L in some case studies). Our review indicated that possible boron contamination in geothermal sites are mostly due to flawed construction of production/re-injection wells and uncontrolled discharge of geothermal water to surface water. The dominancy of non-ionic H3BO3 species makes the selection of the suitable treatment method for geothermal waters limited. Combining boron selective resins and membrane technologies, hybrid systems have provided effluents suitable for irrigation. However, their high energy consumption and course structure of boron selective resins encourage further research to develop cost-effective and environmentally friendly alternatives.