Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
3 results
Search Results
Conference Object Citation - Scopus: 4Effects of Surface Functional Groups on the Aggregation Stability of Magnetite Nanoparticles in Biological Media Containing Serum(Institute of Electrical and Electronics Engineers Inc., 2011) Wiogo, Hilda T. R.; Lim, May; Bulmuş, Volga; Amal, RoseSize stability of magnetite nanoparticles (MNP) with different surface functional groups in biological media was achieved by the addition of fetal bovine serum (FBS). The stability of the particles was attributed to the formation of protein coronas around the particles, which provides sufficient steric hindrance to prevent aggregation of the particles. The stability of different modified MNP were also studied in biological media containing bovine serum albumin (BSA) to further understand the stabilization mechanism. BSA was found to stabilize polyethyleneimine (PEI) modified MNP and polymethacrylic acid (PMAA) coated MNP, but not the bare MNP. These results indicate a difference in interactions between serum protein and the MNP that is govern by the type of functional groups on the MNP surface, with positively charged surface groups resulting higher protein adsorption and better stability. © 2011 IEEE.Article Citation - WoS: 3Citation - Scopus: 3Particulate Sol Route Hydroxyapatite Thin Film-Silk Protein Interface Interactions(Gazi Üniversitesi, 2010) Özcan, Selçuk; Çiftçioğlu, MuhsinHydroxyapatite (HAp) thin film coatings were prepared on bioinert glass slides by a particulate sol method and the effects of intermediate silk fibroin and silk sericin coatings on the HAp film formation and surface topography were examined. The films prepared with smaller crushed particle sols had a higher agglomeration tendency during the drying consolidation step of the thin film formation, and contained agglomerates larger in number and size, which was demonstrated experimentally and in accordance with the DLVO theory. In the thin films prepared on intermediate sericin and fibroin films the number and size of agglomerates were decisively reduced, forming homogeneous films of predominantly primary particles, especially for the larger particle size sols. The regular surface electrostatic potential arrangements of the β-sheet structures of the sericin and fibroin, and of hydroxyapatite crystals, gave rise to the coulombic attraction driven surface energy minimization, enhancing the hydroxyapatite thin film formation process. The positive degree of cooperativity in the hydroxyapatite particle deposition on the silk protein coatings was disrupted by the particle agglomeration tendency.Conference Object Effect of Peo/Ppo Type Triblock Copolymers on Dispersion Behaviour of Aqueous Alumina Suspensions(Trans Tech Publications, 2001) Şakar, Aylin M.; Polat, Hürriyet; Çiftçioğlu, MuhsinThe aim of this study was to investigate the stability and dispersion behaviour of aqueous alumina suspensions in the presence of polyethylene oxide-polypropylene oxide-polyethylene oxide (PEO/PPO/PEO) type block copolymers. The influence of water soluble triblock copolymers with molecular weight ranging from 2900 to 12600 g/mole were tested at Φ = 0.125, 1, 10, 20 vol % solid loading alumina suspensions by rheological, turbidity, sedimentation and surface tension measurements. The results indicate that an alternative dispersant for alumina suspensions is the PEO/PPO triblock copolymers. Their stabilisation mechanism was attributed to the depletion stabilisation. Rheological measurements indicated that these block copolymers (at high EO percentages) coupled with ultrasonic treatment have a positive effect on the dispersion of the agglomerated alumina suspensions. It was not possible to create stable dispersions in the absence of ultrasonic bath treatment. Turbidity measurements at Φ = 0.025, 0.125 vol % showed that, alumina suspensions with PEO/PPO added were stable and have higher turbidity values than block copolymer free suspensions.