Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
6 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 7Synthesis and Characterization of Single-Walled Carbon Nanotube: Cyto-Genotoxicity in Allium Cepa Root Tips and Molecular Docking Studies(Wiley, 2022) İnce Yardımcı, Atike; İstifli, Erman Salih; Açıkbaş, Yaser; Liman, Recep; Yağmurcukardeş, Nesli; Yılmaz, Selahattin; Ciğerci, İbrahim HakkıHerein, single-walled carbon nanotubes (SWCNTs) were synthesized by the thermal chemical vapor deposition (CVD) method, and characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), Raman spectroscopy, dynamic light scattering (DLS), and thermo-gravimetric analysis (TGA). The results indicated that obtained nanotubes were SWCNTs with high crystallinity and their average diameter was 10.15 ± 3 nm. Allium cepa ana–telophase and comet assays on the root meristem were employed to evaluate the cytotoxic and genotoxic effects of SWCNTs by examining mitotic phases, mitotic index (MI), chromosomal aberrations (CAs), and DNA damage. A. cepa root tip cells were exposed to SWCNTs at concentrations of 12.5, 25, 50, and 100 μg/ml for 4 h. Distilled water and methyl methanesulfonate (MMS, 10 μg/ml) were used as the negative and positive control groups, respectively. It was observed that MIs decreased statistically significantly for all applied doses. Besides, CAs such as chromosome laggards, disturbed anaphase–telophase, stickiness and bridges and also DNA damage increased in the presence of SWCNTs in a concentration-dependent manner. In the molecular docking study, the SWCNT were found to be a strong DNA major groove binder showing an energetically very favorable binding free energy of −21.27 kcal/mol. Furthermore, the SWCNT interacted effectively with the nucleotides on both strands of DNA primarily via hydrophobic π and electrostatic interactions. As a result, cytotoxic and genotoxic effects of SWCNTs in A. cepa root meristematic cells which is a reliable system for assessment of nanoparticle toxicology were demonstrated in this study.Article Citation - WoS: 13Citation - Scopus: 14Detection of Crispr-Cas9 Mutations Using a Carbon Nanotube-Modified Electrochemical Genosensor(MDPI, 2021) Kıvrak, Ezgi; Pauzaite, Tekle; Copeland, Nikki A.; Hardy, John G.; Kara, Pınar; Fırlak, Melike; İnce Yardımcı, Atike; Yılmaz, Selahattin; Palaz, FahreddinThe CRISPR-Cas9 system has facilitated the genetic modification of various model organisms and cell lines. The outcomes of any CRISPR-Cas9 assay should be investigated to ensure/improve the precision of genome engineering. In this study, carbon nanotube-modified disposable pencil graphite electrodes (CNT/PGEs) were used to develop a label-free electrochemical nanogenosensor for the detection of point mutations generated in the genome by using the CRISPR-Cas9 system. Carbodiimide chemistry was used to immobilize the 5 '-aminohexyl-linked inosine-substituted probe on the surface of the sensor. After hybridization between the target sequence and probe at the sensor surface, guanine oxidation signals were monitored using differential pulse voltammetry (DPV). Optimization of the sensitivity of the nanogenoassay resulted in a lower detection limit of 213.7 nM. The nanogenosensor was highly specific for the detection of the precisely edited DNA sequence. This method allows for a rapid and easy investigation of the products of CRISPR-based gene editing and can be further developed to an array system for multiplex detection of different-gene editing outcomes.Article Citation - WoS: 11Citation - Scopus: 13Effect of Cnt Incorporation on Pan/Ppy Nanofibers Synthesized by Electrospinning Method(TÜBİTAK, 2020) İnce Yardımcı, Atike; Tanoğlu, Metin; Yılmaz, Selahattin; Selamet, YusufIn this study, carbon nanotubes (CNTs) added polyacrylonitrile/polypyrrole (PAN/PPy) electrospun nanofibers were produced. Average diameters of the nanofibers were measured as 268 and 153 nm for 10 and 25 wt% of PPy contents, respectively. A relatively higher strain to failure values (23.3%) were observed for the low PPy content. When as-grown CNTs (1 and 4 wt%) were added into the PAN/PPy blends, disordered nanofibers were observed to form within the microstructure. To improve the interfacial properties of CNTs/PAN/PPy composites, CNTs were functionalized with H2SO4/HNO3/HCl solution. The functionalized CNTs were well dispersed within the nanofibers and aligned along the direction of nanofibers. Therefore, beads formation on nanofibers decreased. The impedance of the nanofibers was found to decrease with the PPy content and CNT addition. These nanofibers had a great potential to be used as an electrochemical actuator or a tissue engineering scaffold.Article Citation - WoS: 34Citation - Scopus: 39Aptamer-Based Electrochemical Biosensing Strategy Toward Human Non-Small Cell Lung Cancer Using Polyacrylonitrile/Polypyrrole Nanofibers(Springer, 2020) Kıvrak, Ezgi; İnce Yardımcı, Atike; İlhan, Recep; Ballar Kırmızıbayrak, Petek; Yılmaz, Selahattin; Kara, PınarIn the present study, a sensitive electrochemical aptamer-based biosensing strategy for human non-small cell lung cancer (NSCLC) detection was proposed using nanofiber-modified disposable pencil graphite electrodes (PGEs). The composite nanofiber was comprised of polyacrylonitrile (PAN) and polypyrrole (PPy) polymers, and fabrication of the nanofibers was accomplished using electrospinning process onto PGEs. Development of the nanofibers was confirmed using scanning electron microscopy (SEM). The high-affinity 5 '-aminohexyl-linked aptamer was immobilized onto a PAN/PPy composite nanofiber-modified sensor surface via covalent bonding strategy. After incubation with NSCLC living cells (A549 cell line) at 37.5 degrees C, the recognition between aptamer and target cells was monitored by electrochemical impedance spectroscopy (EIS). The selectivity of the aptasensor was evaluated using nonspecific human cervical cancer cells (HeLa) and a nonspecific aptamer sequence. The proposed electrochemical aptasensor showed high sensitivity toward A549 cells with a detection limit of 1.2 x 10(3)cells/mL. The results indicate that our label-free electrochemical aptasensor has great potential in the design of aptasensors for the diagnostics of other types of cancer cells with broad detection capability in clinical analysis.Article Citation - WoS: 18Citation - Scopus: 17Cnt Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold(Trans Tech Publications, 2019) İnce Yardımcı, Atike; Aypek, Hande; Öztürk, Özgür; Yılmaz, Selahattin; Özçivici, Engin; Meşe, Gülistan; Selamet, YusufPolypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.Article Citation - WoS: 28Citation - Scopus: 31The Effects of Catalyst Pretreatment, Growth Atmosphere and Temperature on Carbon Nanotube Synthesis Using Co-mo/Mgo Catalyst(Elsevier Ltd., 2015) İnce Yardımcı, Atike; Yılmaz, Selahattin; Selamet, YusufThe growth of high quality and high yield carbon nanotubes (CNTs) by catalytic chemical vapor deposition (CVD) of CH4 over Co-Mo/MgO catalyst was investigated for different growth temperatures and H2 flow rates. It was observed that CNT yield decreased with the H2 flow rate, however, quality increased with increasing H2 flow rate. CNT yield increased for the temperatures 850-950 °C but dropped significantly above 950 °C. In this study, the highest yield of 1526% was obtained at the growth temperature of 950 °C. The optimum H2 flow rate was 200 sccm; this rate gave both high graphitization and high yield of product. Various CNT growth atmospheres including Ar, H2 and the mixture of both gases were also analyzed and it was observed that the highest quality CNTs were obtained for both pretreatment and growth carried out with H2. This gave a high yield of 292%. On the other hand, CNT growth carried out under Ar atmosphere gave higher CNT yield of 368%, however, the CNTs grown with Ar were more defective and had larger diameters. Prime novelty statement We demonstrate a sorbitol added catalysis synthesis method and importance of the ideal growth conditions to improve high quality single walled carbon nanotube yield up to 1500%.