Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
4 results
Search Results
Conference Object Investigation of Ha Cement Preparation and Properties by Using Central Composite Design(Trans Tech Publications, 2012) Çetin, Ali Emrah; Şimşek, Deniz; Çiftçioğlu, Muhsin; Akdeniz, Yelda; Özmıhçı, Filiz; Aykut Yetkiner, ArzuThe goal of the present work was to investigate the effects of several cement preparation parameters on setting and hardening reaction mechanisms and hydroxyapatite (HA) cement properties. A central composite experimental design (CCD) was conducted by choosing particle size, solid to liquid ratio, pH, seed concentration and buffer concentration as design parameters along with compressive strength and setting time being the responses. Tetracalcium phosphate (TTCP) powders were prepared by heat treatment of calcium and phosphate source mixtures in the 1200-1400°C temperature range followed by quenching to room temperature in a dessicator. The second phase used in the formulations (brushite) was prepared by aqueous chemical methods. A series of HA pastes/cements were prepared by changing the above mentioned design parameters. Cements were characterized by a standardized setting time test, mechanical testing machine, SEM and XRD. HA cements with the desired properties can be formulated by using CCD in which the responses were expressed by a second order polynomial equation of the parameters. Compressive strengths for the majority of HA cements were determined to be in the 100-160 MPa range which is significantly higher than those reported in the literature. © (2012) Trans Tech Publications.Article Citation - WoS: 26Citation - Scopus: 28Thermal Stability of Ag-Exchanged Clinoptilolite Rich Mineral(Springer Verlag, 2008) Akdeniz, Yelda; Ülkü, SemraThermal stability of clinoptilolite rich mineral from Western Anatolia, Turkey and its Ag-exchange forms was investigated. Parent mineral of different sizes were heated up to 1000°C with heating rate of 2 and 10°C min -1 using differential thermal analyzer (DTA) and thermogravimetric analyzer (TG). Ag exchange was conducted both in conventional constant temperature waterbath and microwave at 40, 60 and 80°C. The exchanged minerals were then characteized by scanning electron microscopy (SEM), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), DTA and TG. The particle size and heating rate do not have significant effect on the thermal behavior of the parent mineral and no structural changes were observed with Ag exchange, only decomposition temperature was lowered. It was finally concluded that, Ag-exchanged clinoptilolite rich minerals were less thermally stable compared to parent mineral that does not affect their use for possible applications.Article Citation - WoS: 19Citation - Scopus: 21Microwave Effect on Ion-Exchange and Structure of Clinoptilolite(Springer Verlag, 2007) Akdeniz, Yelda; Ülkü, SemraThe effect of microwave irradiation on the ion exchange degree and structure of clinoptilolite mineral has been examined in comparison with the conventional heat treatment in waterbath. Clinoptilolite-rich mineral from the Western Anatolia, Bigadiç region was used for the experimental study. The mineral was mainly clinoptilolite (80-85%) and additionally, quartz (5-10%), and analcime+mordenite (<5%) were found as co-existing minerals. The mineral was stable towards dehydration and maintains its original structure up to 800°C. The BET and Langmuir surface areas of the sample were found to be 22 and 17m2/g for N2 adsorption and 28 and 22m2/g for Ar adsorption, respectively. For the exchange experiments, clinoptilolite rich mineral was treated with 1N NaCl salt solution both in a microwave unit and waterbath for 10min, 1h and 2h at 80°C. The waterbath treatment with the same conditions was continued for two additional weeks. The chemical composition of the parent and Na-exchanged forms of the clinoptilolite rich minerals were analyzed by using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES). Microwave treatment was found to be more rapid and effective for ion exchange compared to conventional waterbath treatment. Additionally, the XRD results reveal that microwave irradiation has zero effect on the structure of the clinoptilolite rich mineral.Article Citation - WoS: 44Citation - Scopus: 50Thermal Behaviour of a Zeolitic Tuff(Elsevier Ltd., 2007) Çağlar Duvarcı, Özlem; Akdeniz, Yelda; Özmıhçı Ömürlü, Filiz; Ülkü, Semra; Balköse, Devrim; Çiftçioğlu, MuhsinNatural zeolites undergo structural changes after heating which open their possible use in different fields, related to their chemical and physical properties, such as building stone, lightweight aggregate, ceramic foam, concrete bricks, tiles, porcelain stoneware and additive in puzzolonic cements. In this study, thermal behavior of zeolitic tuff quarried from Gördes-Manisa, region of Turkey was investigated. Zeolitic rocks were first reduced to 2 μm and pellets were prepared by dry-pressing. The pellets were heated for 30 min in the temperature range of 200-1200 °C. Heating the tuff up to 600 °C did not cause any structural change detectable by X-Ray powder diffraction (X-Ray), Fourier Transform Infrared Spectroscopy (FTIR) and thermal characterization methods with regard to the original sample, while further increase in the temperature caused structural breakdown of zeolitic tuff. The appearance of the broad low intensity peaks in X-Ray diffraction diagrams indicated most probably a partial transformation of crystal structure into an amorphous structure. The Scanning Electron Microscopy (SEM) micrographs showed that the crystals seen in the original rock sample were broken during grinding and pressing processes. The crystal structure disappeared above 1000 °C and the spherical pores was observed at 1200 °C. Chemical composition of the zeolitic tuff did not change significantly with respect to temperature. The highest density (2.28 g/cm3) and hardness (387 Hv) were obtained by sintering the pellets at 1000 °C for 30 min.