Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
5 results
Search Results
Article Payne Cell Gravimetric Measurements in Polymer-Solvent Systems for Diffusion Coefficients and Isotherm Data(Wiley, 2021) Zielinski, John M.; Garcia, Armando R.; Alsoy Altınkaya, SacideThe discussion focuses on the application of a Payne cell to the measurement of diffusion and solubility coefficients in polymer/solvent systems. Payne cells have, thus far, been used exclusively to measure steady-state permeation rates of solvents. An analytical model has been developed to describe transient gravimetric sorption and desorption measurements performed with a Payne cell. The model has been validated by a complementary numerical simulation and has been applied to evaluate diffusion and solubility coefficients in two different toluene-silicone rubber systems. The data measured using the Payne cell are found to compare very well with diffusion coefficient and isotherm data measured by traditional gravimetric sorption experiments.Article Citation - WoS: 1Citation - Scopus: 1The Effect of Mass Transfer Resistance and Nonuniform Initial Solvent Concentration on Permeation Through Polymer Membranes(John Wiley and Sons Inc., 2018) Zielinski, John M.; Alsoy Altınkaya, SacideA numerical simulation model has been developed which enables one to examine the effects of surface mass transfer resistance on the evaluation of permeation (P*), diffusion (D), and solubility (S) coefficients from unsteady-state mass transfer experiments as well as the transmission rate. A complementary analytical expression has been developed which validates the numerical model and facilitates the evaluation of the concentration dependence of P*, D, and S from sequential step-change experiments, under experimental conditions when the surface mass transfer resistance can be neglected.Article Citation - WoS: 27Citation - Scopus: 37Nanofibrous Gelatine Scaffolds Integrated With Nerve Growth Factor-Loaded Alginate Microspheres for Brain Tissue Engineering(John Wiley and Sons Inc., 2018) Büyüköz, Melda; Erdal, Esra; Alsoy Altınkaya, SacideNeural regeneration research is designed in part to develop strategies for therapy after nerve damage due to injury or disease. In this study, a new gelatine-based biomimetic scaffold was fabricated for brain tissue engineering applications. A technique combining thermally induced phase separation and porogen leaching was used to create interconnected macropores and nanofibrous structure. To promote tissue regeneration processes, the scaffolds were integrated with nerve growth factor (NGF)-loaded alginate microspheres. The results showed that nanofibrous matrix could only be obtained when gelatine concentration was at least 7.5% (w/v). The scaffold with a modulus value (1.2 kPa) similar to that of brain tissue (0.5–1 kPa) was obtained by optimizing the heat treatment time, macropore size and gelatine concentration. The encapsulation efficiencies of NGF into 0.1% and 1% alginate microspheres were 85% and 100%, respectively. The release rate of NGF from the microspheres was controlled by the alginate concentration and the poly(L-lysine) coating. The immobilization of the microspheres in the scaffold reduced burst release and significantly extended the release period. The nanofibrous architecture and controlled release of NGF from the microspheres induced neurite extension of PC12 cells, demonstrating that the released NGF was in an active form. The results suggest that the scaffolds prepared in this study may have potential applications in brain tissue engineering due to topologic and mechanical properties similar to brain tissue and pore structure suitable for cell growth and differentiation.Article Citation - WoS: 13Citation - Scopus: 18Stimuli Responsive Polymer-Based Strategies for Polynucleotide Delivery(Cambridge University Press, 2017) Uz, Metin; Alsoy Altınkaya, Sacide; Mallapragada, Surya K.In recent years, stimuli responsive polymer based gene delivery vehicle design for cancer treatment and treatment of other genetic disorders has received extensive attention. Early studies focusing on DNA delivery have been facilitated by functional polymers and this area has seen further growth spurred by recent gene silencing strategies developed for small RNA [i.e., small interfering RNA (siRNA) or micro RNA (miRNA)] delivery. DNA and small RNAs possess analogous properties; however, their explicit differences define the specific challenges associated with the delivery route and the design of functional materials to overcome distinct challenges. Apart from classical gene delivery, the recent advances in genome editing have revealed the necessity of new delivery devices for genome editing tools. A system involving CRISPR (clustered, regularly interspaced, short palindromic repeats) and an endonuclease CRISPR-associated protein 9 (Cas9) coupled with a short, single-guide RNA (sgRNA) has emerged as a promising tool for genome editing along with functional delivery systems. For all these nucleic acid based treatments, the internal or external physiochemical changes in the biological tissue/cells play a major role in the design of stimuli responsive delivery materials for both in vitro and in vivo applications. This review emphasizes the recent advances in the use of pH, temperature, and redox potential-responsive polymers overcoming hurdles for delivery of gene and gene editing tools for both in vitro and in vivo applications. Specifically the chapter focuses on recently proposed delivery strategies, types of delivery systems, and polymer synthesis/modification methods. The recent advances in CRISPR/Cas9-sgRNA technology and delivery are also described in a separate section. The review ends with current clinical trials, concluding remarks, and future perspectives.Article Citation - WoS: 24Citation - Scopus: 25Processing of Polymers With Supercritical Fluids(John Wiley and Sons Inc., 1999) Alsoy Altınkaya, Sacide; Duda, John LarryThe removal of impurities, such as residual solvents, unreacted monomers, catalysts, and side-reaction products from polymers represents an important step in polymer processing. Conventional devolatilization techniques for the purification of polymers have limited effectiveness. Devolatilization with supercritical fluids, however, can enhance impurity removal by increasing the thermodynamic driving force and molecular diffusivity.