Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
4 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 3Heat and Mass Transfer in the Adsorbent Bed of an Adsorption Heat Pump(Taylor and Francis Ltd., 2011) Demir, Hasan; Mobedi, Moghtada; Ülkü, SemraThe heat and mass transfer equations governing an adsorbent bed in an adsorption heat p mp and the mass balance equation for the adsorbent particles in the adsorbent bed were solved numerically to simulate the cycle of a basic adsorption heat pump, which includes isobaric adsorption, isosteric heating, isobaric desorption, and isosteric cooling processes. The finite difference method was used to solve the set of governing equations, which are highly nonlinear and coupled. The pressures of the evaporator and condenser were 2 and 20 kPa, respectively, and the regeneration temperature of the bed was 403 K. Changes in the temperature, adsorptive pressure, and adsorbate concentration in the adsorbent bed at different steps of the cycle were determined. The basic simulated cycle is presented in a Clausius-Clapeyron diagram, which illustrates the changes in average pressure and temperature of the adsorbent bed throughout the cycle. The results of the simulation indicated that the most time-consuming processes in the adsorption heat pump cycle were isobaric adsorption and isobaric desorption. The high thermal resistance of the bed slows down heat transfer, prolonging adsorption and desorption processes.Article Citation - WoS: 12Citation - Scopus: 11A Parametric Study on Isobaric Adsorption Process in a Closed Adsorbent Bed(Elsevier Ltd., 2010) Gediz İliş, Gamze; Mobedi, Moghtada; Ülkü, SemraA numerical study on heat and mass transfer in an annular adsorbent bed filled with adsorbent granules for an isobaric adsorption process is performed. In order to reduce the number of independent parameters that influences heat and mass transfer in the bed, the governing equations and related initial and boundary conditions for the problem are non-dimensionalized and this yields two dimensionless parameters as G and Γ. The G dimensionless parameter is the ratio of heat of adsorption to sensible heat stored by adsorbent particle and Γ parameter compares mass diffusion within the adsorbent particle and heat diffusion in the radial direction of the adsorbent bed. The obtained results show that the total dimensionless time for an adsorption process can be reduced by increasing of Γ value. The total dimensionless time is independent from G for low values of Γ (i.e. Γ=105). The results also show that the instantaneous equilibrium model can provide accurate results only for an adsorbent bed with a low value of Γ (i.e. Γ=105). The present study is performed for Γ values from 105 to 1 and G value from 1 to 100. © 2010 Elsevier Ltd.Article Citation - WoS: 62Citation - Scopus: 64Effects of Porosity on Heat and Mass Transfer in a Granular Adsorbent Bed(Elsevier Ltd., 2009) Demir, Hasan; Mobedi, Moghtada; Ülkü, SemraIn the present study, the mechanism of heat and mass transfer in an annulus adsorbent is handled. The heat and mass transfer equations for the adsorbent bed and the mass balance equation for the adsorbent granules are numerically solved to obtain the distributions of temperature, pressure, adsorptive density and adsorbate concentration in the adsorbent bed. The study is performed for the silica gel-water pair and for three different values of porosity as 0.1, 0.2 and 0.3. The distributions of temperature and adsorbate concentration are considerably influenced from the bed porosity. The adsorption period increases with the increase of the porosity value. The porosity affects the pressure and adsorptive density distributions at the beginning of the process and after a relatively short time, the averages of these dependent variables approach to the final equilibrium state.Article Citation - WoS: 325Citation - Scopus: 366A Review on Adsorption Heat Pump: Problems and Solutions(Elsevier, 2008) Demir, Hasan; Mobedi, Moghtada; Ülkü, SemraAdsorption heat pumps have considerably sparked attentions in recent years. The present paper covers the working principle of adsorption heat pumps, recent studies on advanced cycles, developments in adsorbent-adsorbate pairs and design of adsorbent beds. The adsorbent-adsorbate pair features for in order to be employed in the adsorption heat pumps are described. The adsorption heat pumps are compared with the vapor compression and absorption heat pumps. The problems and troubles of adsorption heat pumps are classified and researches to overcome the difficulties are discussed.