Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
3 results
Search Results
Article Citation - WoS: 21Citation - Scopus: 23Adsorption of Anionic Polyelectrolyte and Comb Polymers Onto Lead Magnesium Niobate(Elsevier Ltd., 2008) Şakar-Deliormanlı, Aylin; Çelik, Erdal; Polat, MehmetThis paper presents the results concerning the adsorption mechanism of polyacrylic acid (PAA) and polyacrylic acid/polyethylene oxide (PAA/PEO) comb polymer onto lead magnesium niobate (PMN) powders. In the study adsorption behavior of PAA and PAA/PEO onto PMN surface were determined in aqueous solutions and the influence of pH and ionic strength was investigated. Results showed that adsorption of PAA or PAA/PEO increased with decreasing pH of the suspensions. The increase in the ionic strength or the presence of divalent cations caused an increase in the adsorption of both polyelectrolytes. It was observed that the adsorption reaches a maximum when PAA is fully complexed in solution. On the other hand, the increase in the adsorption of PAA/PEO onto PMN in the presence of monovalent or divalent salt was attributed to the decrease in the electrostatic forces rather than complex formation with the divalent metal ions in solution. Turbidity measurements showed that there is no complex formation between the divalent metal ions and PAA/PEO comb polymers due to shielding effect of the PEO teeth.Article Citation - WoS: 98Citation - Scopus: 108Capacity and Mechanism of Phenol Adsorption on Lignite(Elsevier Ltd., 2006) Polat, Hürriyet; Molva, Murat; Polat, MehmetA raw lignitic coal from Soma, Turkey was investigated to determine its potential as an adsorbent for phenol removal from wastewaters. Kinetic batch tests demonstrated that phenol could be completely removed from solution given sufficient solids loading and reaction time. The adsorption capacity of 10 mg/g obtained with the lignite is low compared to those achievable with activated carbons (around 300 mg/g). However, when normalized for the surface area, the adsorption capacity was much larger for the lignite (1.3 mg/m2) than that generally observed with activated carbons (0.05-0.3 mg/m2). Hydrogen-bonding of the phenolic -OH with the oxygen sites on the lignite surface is the most likely mechanism for adsorption. Though water molecules also have affinity for the same oxygen sites, lateral benzene ring interactions make phenol adsorption energetically more favorable. Since phenol molecules adsorbed in this fashion would project their benzene rings into solution, formation of a second layer through the action of the dispersive π-π interactions between the benzene rings is very likely. Residual water quality with respect to major elements and heavy metals was within acceptable limits defined by the ASTM standards. Dissolution of organic matter from the lignite was also observed to be negligible.Article Citation - WoS: 1Citation - Scopus: 2Kinetic Estimation of the Adsorbate Distribution on the Surface From Adsorbed Amounts(Elsevier Ltd., 2006) Polat, MehmetA phenomenological multilayer adsorption model for a well-dispersed, homogeneous, nonporous adsorbent and a molecular adsorbate is presented. The model provides explicit kinetic expressions associating the adsorbed amounts to the fraction of the surface occupied and reduces to the first- and second-order adsorption models for special cases. Parameters of the model are a pair of true rate constants related to the adsorbate-adsorbent and adsorbate-surface adsorbate affinities. A general graphical procedure and analytical equations for special cases are provided to estimate the rate constants from kinetic adsorption data. Data from the adsorption of sodium stearate onto α-alumina from water were used to test the model. The predicted values of the rate constants suggested that the stearate was distributed homogeneously on the alumina surface and essentially adsorbed as a monolayer before starting to form the second layer.