Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
38 results
Search Results
Conference Object Citation - WoS: 24Effect of pH and Hydration on the Normal and Lateral Interaction Forces Between Alumina Surfaces(2006) Polat, Mehmet; Sato, Kimiyasu; Nagaoka, Takaaki; Watari, KojiNormal and lateral interaction forces between alumina surfaces were measured using Atomic Force Microscopy-Colloid Probe Method at different pH. The normal force curves exhibit a well-defined repulsive barrier and an attractive minimum at acidic pH and the DLVO theory shows excellent agreement with the data. The normal forces are always repulsive at basic pH and the theory fails to represent the measurements. Lateral forces are almost an order of magnitude smaller in the basic solutions. These differences, which have important implications in the study of stability and rheology, are attributed to the hydration of the alumina surface at basic pH. © 2013 Elsevier B.V., All rights reserved.Article Citation - WoS: 2Citation - Scopus: 3A Phenomenological Kinetic Flotation Model: Distinct Time-Variant Floatability Distributions for the Pulp and Froth Materials(Elsevier, 2023) Polat, Mehmet; Polat, HürriyetA simple and easy-to-use phenomenological kinetic flotation model, strongly connected with the physics of the process, is proposed in this paper. The model explicitly contains the cell volume, aeration rate, volumetric holdup, mean bubble size, and particle density as input variables. It can be employed to characterize the floatability distributions of the particles in the pulp and the froth separately any time during the flotation process. Two new time-dependent kinetic parameters, the bubble loading factor & phi;(t) and the maximum cell mass transfer capacity Mmax(t) also appear in the model expression. & phi;(t) is a measure of the degree of crowding of the bubble surfaces and accounts for the deviations from the first-order rate equation. Mmax(t) describes the maximum amount of mass that can be transported to the froth phase by the bubble population in the cell. Screen fractionation of each froth product collected at different time intervals during a single kinetic flotation test is sufficient to generate the data required by the model for analysis. Application of the model to this data yields directly time-dependent functions for the floatability of the particles reporting to froth Kf(t) or remaining in the cell Kp(t) for each size fraction separately, without the need for any empirical parameters. The test of the model was carried out using published kinetic flotation data from the literature.Book Part Citation - Scopus: 3Tissue Engineering Applications of Marine-Based Materials(Springer, 2022) Polat, Hürriyet; Zeybek, Nuket; Polat, MehmetTissue engineering is a promising approach in replacing or improving tissues lost or has become nonviable due to disease or trauma by the use of scaffold materials by combining engineering and biochemical/physicochemical methods. Its purpose is to create suitable matrices that support cell differentiation and proliferation toward the formation of new and functional tissue. Marine-based natural compounds are potential scaffold feedstock material in tissue engineering owing to their biocompatibility and biodegradability while providing excellent biochemical/physicochemical properties. Numerous application areas and various fabrication routes techniques described in the literature attest to the importance of these materials in tissue regeneration. This review has been carried to merge the information from a large number of studies on the marine-based scaffold materials in tissue engineering into a coherent summary. © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2022.Research Project Uçucu kül ve doğal zeolitin beraber kullanılarak borun atık sulardan uzaklaştırılması(2008) Polat, Hürriyet; Polat, Mehmet; Şekeroğlu, KorayBu proje kapsamında, Yeniköy, Kemerköy, Soma ve Yatağan termik santrallerinden alınan uçucu küllerin, sıcaklık, katı / sıvı oranı ve başlangıç konsantrasyonu gibi parametler kullanılarak bor adsorpsiyon kapasiteleri incelenmiştir. Bor adsorpsiyon deneyleri laboratuvarda hazırlanan simültane sular (10, 25, 50, 100 ve 300 ppm Bor) ve Kızıldere (Denizli) jeotermal tesislerinden (25-30 ppm Bor) alınan borlu sularla yapılmıştır. Yapılan “batch” deneylere dayanarak, uçucu küllerin boru adsopladığı ve özellikle yüzey alanı en geniş olan Yeniköy külü yeterli zaman ve yüzey alanı sağlandığında %99 ‘a varan adsorpsiyon miktarına ulaştığı gözlenmiştir. Tüm küllerin deney sonuçları tek katmanlı adsorpsiyonu belirten “Langmuir” izotermine ve Kaydırılmış İkinci Mertebe parametresine daha uygun olduğu tespit edilmiştir. Yapılan sıcaklık çalışmalarında, Yeniköy ve Kemerköy külleriyle 25o C, 45o C ve 65o C koşullarında yapılan deneylerin verileri kullanılarak, o ΔH ,o ΔG , o ΔS değerleri hesaplanmıştır. Sıcaklıkla azalan adsorpsiyon kapasitesi ve negatif o ΔH değerleri, ekzotermik adsorpsiyon olduğunu belirtmektedir. Aynı zamanda -40,0 kJ / mol’ün altında çıkan (-52,89 ve -48,55 kJ / mol) entalpi ( o ΔH ) değerleri kimyasal adsorpsiyon olduğunu belirtmektedir. Soma ve Yatağan külleri için de Langmuir izotermlerinin uygun olması kimyasal bir adsorpsiyon olduğunu önermektedir.Research Project Metal oksit yüzeylerinin çözeltilerdeki yük dağılımının atomik kuvvet mikroskobu ile belirlenmesi(2012) Polat, Mehmet; Gürel, Ayşe; Yelken, GülnihalMineral, seramik, çevre, biyoloji, boya, ilaç, kozmetik vb. endüstrilerde sulu çözeltilerde dağılmış kolloidal tanelerin homojenitesi, dagıtılabilirliği, kararlılığı, akıcılığı ve şekillendirilebilirliği bu endüstrilerdeki uygulamaların başarısını belirler. Bu özelliklerin kontrolü, sistemi olusturan tanelerin karşılıklı etkileşimlerinin kontrol edilebilmesine bağlıdır. Sistemdeki diger bileşenlerin (yüzey aktif maddeler, proteinler vb) tane yüzeylerine adsorpsiyonu da bu etkileşimler tarafından belirlenir. Van der Waals (VdW) ve Elektriksel Çifte Tabaka (EDL) kuvvetleri, bu etkileşimlerin başlıca bileşenleridir. Tanelerin iç yapısına dayalı olan VdW etkileşimleri bir kolloidal sistem için sabit kabul edilebilir. Tanelerin çözeltide kazandıkları yüzey yükleri tarafından belirlenen EDL kuvvetleri ise çözelti kimyasına bağlı olarak büyük değişimler gösterir. Bu nedenle, EDL kuvvetlerinin manipülasyonu, kolloid sistemlerin kontrolünde kullanılan başlıca yöntemdir.Article Citation - WoS: 6Citation - Scopus: 7Designing Robust Xylan/Chitosan Composite Shells Around Drug-Loaded Msns: Stability in Upper Git and Degradation in the Colon Microbiota(Elsevier, 2023) Zeybek, Nüket; Büyükkileci, Ali Oğuz; Güleç, Şükrü; Polat, Mehmet; Polat, Hürriyetong residence times, near-neutral pH values, and release triggered by the enzymatic action of the resident microbiota offer unique opportunities for improved drug delivery in the colon. The fact that a delivery agent must also pass through the complete GI tract without degradation presents a challenge due to widely changing pH conditions. In this study, a promising colon-targeted drug delivery system was composed of a xylan/chitosan composite shell formed on curcumin-loaded mesoporous silica nanoparticles (MSNs). A novel synthesis approach was employed to facilitate precipitation of negatively charged xylan on negatively charged MSNs by concurrent chitosan polymerization. Curcumin-loaded xylan/chitosan-coated MSNs (C-MSNs) were determined to contain nearly 42% xylan by the inclusion of chitosan in a one-to-one ratio with xylan. The xylan/chitosan composite shell demonstrated excellent stability in the acidic upper GI tract. The hydrolysis of glycosidic bonds by resident microbiota was the triggering mechanism for xylan degradation and curcumin release in the colon. The presence of xylan has the further benefit of increasing the number of beneficial bacteria and improving short-chain fatty acid production for improved colon health.Article Citation - WoS: 8Citation - Scopus: 11The Effect of Protein Bsa on the Stability of Lipophilic Drug (docetaxel)-Loaded Polymeric Micelles(Elsevier, 2021) Polat, Hürriyet; Çevik Eren, Merve; Polat, MehmetPolymeric micelles are promising delivery vehicles for improving the efficacy of anticancer drugs and reducing their side effects. However, considering the binding ability of serum albumin, the possible interaction of micelles with the native plasma components in the bloodstream raises serious questions on micellar stability. The stability of barren or drug-loaded copolymeric micelles was investigated systematically in distilled water (DW) and simulated body fluid (SBF) solutions in the presence of a model protein. The copolymer was a Pluronic® series triblock copolymer (P-123), the drug was strongly lipophilic docetaxel (DOC) and the protein was Bovine Serum Albumin (BSA). The effect of such factors as BSA and DOC concentrations and the aging of the micellar solutions was studied. Both the barren and drug-loaded micelles were quite stable in blank DW and SBF solutions for long times up to 10 days. They lost integrity and showed no inclination to re-assemble when the BSA concentration reached a critical value, which was very close to the plasma Human Serum Albumin (HSA) concentration. The presence of DOC in the micellar cores could not prevent disintegration. The results illustrate clearly that ensuring the stability of polymeric micelles in blood plasma should be an important design factor in their use as drug carriers.Article Citation - WoS: 4Citation - Scopus: 5Investigating the Effects of Ultrasonic Energy on the Flotation Behavior of Pyrite and Galena Minerals(Oficyna Wydawnicza Politechniki Wroclawsjiej, 2020) Horasan, Ümit; Tanrıverdi, Mehmet; Çicek, Tayfun; Polat, MehmetAlthough pyrite is one of the more abundant minerals of the earth crust, it has low economic value. When it reports to the concentrate during flotation along with the valuable minerals, it decreases the grade of the valuable minerals and leads to an increase in smelting costs. Numerous modifications have been suggested in the literature to increase the selective recovery of pyrite containing base metal-sulfide ores. The use of ultrasonic applications is one such method. In this study, the effect of the ultrasonic application on the flotation behavior of galena and pyrite mineral was investigated through systematic Hallimond Tube experiments. In the initial phase of the experiments, the optimum flotation conditions (particle size, pH, amount of air, and amount of reagent) were determined for the two minerals. Subsequent experiments were carried out under these optimums to distinguish the effect of the ultrasonic application. The influence of how the ultrasonic application was applied (i.e. before and during the conditioning stage or before the re-flotation of the concentrate) was also studied. It was observed that the ultrasonic application had a strong activating influence if it was administered before or during the conditioning stage. The effect was similar to whether the minerals were floated individually or from their mixtures. However, when it was applied to a flotation concentrate before re-flotation, it selectively displayed a depressant action for the pyrite to the extent that no depressants were needed. The results conclusively showed that the ultrasonic application could drastically improve the selectivity of the complex ores.Article Solunabilir Tozun Su Spreyleri Kullanılarak Bastırılmasında Son Gelişmeler(2000) Polat, Hürriyet; Polat, Mehmet; Gürgen, SabitTürkiye'de görülen meslek hastalıklarının çoğunu tozun solunmasından kaynaklanan pnömokonyoz oluşturmaktadır. Bu yazının amacı, yeraltı ocaklarında işçi sağlığı açısından sakıncalı olan havada asılı tozların, su spreyleri kullanılarak bastırılması konusunda gelinen aşamayı sunmaktır. Bu amaçla, havada asılı toz ve su damlalarıyla yapılan detaylı çalışmalar ışığında, sprey suyuna katılan yüzey aktif maddelerin istenen verim artışını sağlayamama nedenleri ele alınmakta ve su spreylerinin Türkiye'deki maden ocaklarında kullanım olanakları tartışılmaktadır.Conference Object Effect of Some Physical, and Chemical Variables on Flocculation and Sediment Behaviour(A.A. Balkema Publishers, 2000) Polat, Hürriyet; Polat, Mehmet; İpekoğlu, ÜnerEffect of some chemical and physical variables on the settling rate, final sediment height, sediment viscosity and supernatant turbidity of a clay sample was studied using various polyacrylamide type flocculants. Increasing flocculant concentration significantly increased both the settling rate and sediment viscosity. More importantly, changes in the final sediment, height, hence the packing density, was minimal for all the conditions tested once the sediment was allowed to consolidate. Also, the mode of addition of the polymer, at once or continuous, did not seem to affect any of the parameters measured. Conditioning time seemed to alter the settling rate at low polymer concentrations, but had no effect at high polymer concentrations. However, increasing the conditioning time caused a decrease in the sediment viscosity. Different types of the polyacrylimides generated different settling rates at a given concentration, but the final sediment height was nearly independent of polymer type.