Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
43 results
Search Results
Research Project İzmir ilinde içme suyu kaynaklı maruziyet ve risk değerlendirmesi(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2005) Sofuoğlu, Sait Cemil; Kavcar, PınarBu çalışmada İzmir ilinde yarı-ihtimal tabanlı bir örnekleme uygulanarak seçilen hanelerden içme suyu örnekleri toplanmış, her haneden bir kişiye uygulanan anketlerle demografik bilgiler ve içme suyu tüketim oranlarını belirlemek üzere bilgi toplanmıştır. Bunu takiben, elde edilen veriler kullanılarak örnekte yer alan bireyler ve İzmir ili halkı için, sırasıyla, bireysel ve kitlesel maruziyet, kanser harici risk, ve kanser riski seviyeleri uçucu organik maddeler, iz metaller, ve pestisitier için belirlenmiştir.Article Citation - WoS: 21Citation - Scopus: 24Phytoremediation of Olive Mill Wastewater With Vetiveria Zizanioides (l.) Nash and Cyperus Alternifolius L.(Elsevier, 2021) Gören, Ayşegül Yağmur; Yücel, Arzu; Sofuoğlu, Sait Cemil; Sofuoğlu, AysunOlive Mill Wastewater (OMW) contains high concentrations of contaminants, including organic, nitrogen, and phenolic compounds that are extremely harmful to the environment and human health. The key purpose of this study was to remove total organic carbon (TOC), total nitrogen (TN), and phenolic compounds (TP) from OMW using floating wetland planted with Vetiveria zizanioides (L.) Nash (vetiver) and Cyperus alternifolius L. (umbrella palm) species. A total of eighteen floating wetlands were constructed. Twelve tanks were planted with vetiver and umbrella palm while another six tanks were maintained as unplanted controls. Experiments were conducted with wastewater volume of 56 L for 67 days using 5% (OMW-5) and 15% (OMW-15) treatments of OMW in a greenhouse. The highest TOC, TN, and TP removal efficiencies were found to be 95.3 ± 0.01, 82.7 ± 2.55, and 98.8 ± 0.07% in umbrella palm planted OMW-5, while the removal efficiencies were 84.9 ± 0.38, 92.7 ± 0.37, and 38.9 ± 1.97% in vetiver planted OMW-5. Similarly, the TOC, TN, and TP removal efficiencies in OMW-15 were 89.3 ± 0.28, 40.86 ± 1.73, and 96.8 ± 0.18% with umbrella palm and 89.1 ± 0.70, 23.7 ± 1.27, and 92.1 ± 0.41% with vetiver. The plants accumulated trace elements, especially in the roots, with the order of Fe > Mn > Cu > Zn > B > Pb > Cr > Ni > Co > Cd for umbrella palm. The umbrella palm shoot phenol content was found to be 2358 ± 201 and 1421 ± 198 mg/kg in OMW-5 and OMW-15, respectively. Overall, this study revealed that floating wetlands planted with vetiver and umbrella palm species have the potential to be used as a green treatment method to treat diluted high strength OMW.Article Citation - WoS: 12Citation - Scopus: 13Selected Persistent Organic Pollutants in Ambient Air in Turkey: Regional Sources and Controlling Factors(American Chemical Society, 2021) Güngörmüş, Elif; Sofuoğlu, Aysun; Çelik, Halil; Gedik, Kadir; Mulder, Marie D.; Lammel, Gerhard; Sofuoğlu, Sait CemilAs a result of its unique location, Turkey receives air masses from Europe, Russia, Middle East, and Africa, making it an important place in terms of long-range atmospheric transport (LRT) of contaminants. Atmospheric levels of 22 organochlorine pesticides (OCPs), 45 polychlorinated biphenyls (PCBs), and 14 polybrominated diphenyl ethers (PBDEs) were measured in two metropolitan cities, Istanbul and Izmir, on a weekly basis from May 2014 to May 2015. Dichlorodiphenyltrichloroethane (DDT) and its derivatives were dominant OCP species, followed by isomers of hexachlorocyclohexane (HCH) at both sites. The annual mean concentration of Sigma DDX (sum of o,p'-DDT, p,p'-DDT, o,p'-DDD, p,p'-DDD, o,p'-DDE, and p,p'-DDE) was 82 pg/m(3) for Istanbul and 89 pg/m(3) for Izmir, while these levels were about 46 pg/m(3) for Sigma HCHs (sum of alpha-, beta-, gamma-, and delta-HCH) at both of the sites. At both stations, tri- and tetra-PCBs and tetra- and penta-PBDEs were dominant congeners. The temperature dependence indicates that both LRT and local contaminated areas contribute to the elevated levels. A Lagrangian particle dispersion model (FLEXPART) showed a few potential source regions in northern Africa and Middle East, southern-southwestern and eastern Europe including Russia, as well as from local domestic metropolitan areas.Article Tuvalet Temizlik Ürünlerinin Kullanımı ile Salıverilen Karbon Tetraklorürün İç Hava Düzeyleri ve Sağlık Riskleri(TMMOB Makina Mühendisleri Odası, 2020) Ayri, İlknur; Genişoğlu, Mesut; Gaygısız, Handan; Sofuoğlu, Aysun; Sofuoğlu, Sait Cemilİç hava kirliliği açısından temizlik ürünleri kullanımı önemli bir kaynak oluşturmak-tadır. Bir Uçucu Organik Bileşik (UOB) olan karbon tetraklorürün emisyonu, diğer UOB’ler ile birlikte klorlanmış çeşme suyundan, özellikle su sıcaklığının artırıldığı yıkanma, çamaşır ve bulaşık yıkanması sırasında oluşur. Bununla birlikte, ağartıcı olarak hipoklorit (çamaşır suyu) içeren temizlik ürünlerinde ve kullanımı sırasında, çamaşır suyu ile organik maddelerin reaksiyona girmesiyle oluşumu bu bileşik için göreceli çok daha güçlü bir kaynak oluşturmaktadır. Karbon tetraklorürün hem kro-nik-toksik hem de karsinojenik sağlık etkileri olması sebebiyle bu temizlik ürünlerinin kullanımı durumunda iç ortam havasından etkin bir havalandırma ile uzaklaştırılma-sı gerekmektedir. Bu çalışmada, karbon tetraklorürün tuvalet ve banyolarda kullanı-lan klozet ve rezervuar tipi temizleyicilerden emisyonu deneysel olarak incelenmiş, iç hava düzeyleri modelleme ile tahmin edilmiş, solunum yoluyla maruziyet için kanser riski değerlendirmesi yapılmıştır. Ürünlerin emisyon potansiyeli tepe boşluğu katı fazlı mikroekstraksiyonu takiben GC/MS yöntemiyle incelenmiş, iç hava düzeylerinin modellenmesi için 8,9 m3 oda hacmi ve 0,5 ach hava değişimi hızı kullanılmıştır. Kul-lanılan bu hız ile ürünlerin kullanımından kaynaklanan karbon tetraklorür konsant-rasyonun sadece %0,6’lık kısmı uzaklaştırılabilmektedir. Ortalama ve 95. yüzdelik kanser risk değerleri kabul edilebilir risk olan milyonda birin altındadır ancak ürün-ler birer iç ortam karbon tetraklorür kaynağı oluşturmaktadır.Article Citation - WoS: 64Citation - Scopus: 78Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites(Springer Verlag, 2020) Başalp, Dildare; Tıhmınlıoğlu, Funda; Sofuoğlu, Sait Cemil; İnal, Fikret; Sofuoğlu, AysunIn this study, Wood Plastic Composites (WPCs) were produced from post-consumer bulky wastes of recycled plastic and wood in order to minimize waste, decrease environmental effects of plastics, reserve natural resources, and support circular economy for sustainable production and consumption. Five different types of polypropylene (PP) or polyethylene (PE) based recycled plastics and wood obtained from urban household bulky wastes were used in the production of recycled WPC composites, r-WPCs. Virgin WPC (v-WPC) and r-WPC compounds were prepared with wood flour (WF) and maleic anhydride grafted compatibilizer (MAPP or MAPE) to evaluate the effect of recycled polymer type and compatibilizer on the mechanical properties. It was found that tensile strength properties of r-WPCs produced from recycled PP (r-PP) were higher than that of the r-WPCs produced from mixed polyolefins and recycled PE. r-WPCs containing anti-oxidants, UV stabilizers, and compatibilizer with different WF compositions were produced from only recycled garden fraction PP (PPFGF) to determine the optimum composition and processing temperature for pilot scale manufacturing of r-WPCs. Based on tensile, impact, flexural, and water sorption properties of r-WPC compounds with different formulations, the optimum conditions of r-WPC compounds for industrial manufacturing process were determined. Surface morphology of fractured surfaces as well as tensile, flexural and density results of r-WPC compounds revealed the enhancement effect of MAPP on interfacial adhesion in r-WPCs. r-WPC products (crates and table/chair legs) based on bulky wastes were produced using an injection molding process at industrial scale by using 30 wt% WF-filled r-WPC compound. This study demonstrated that r-WPC compounds from recycled bulky plastic and wood wastes can be used as a potential raw material in plastic as well as WPC industry, contributing to circular economy. GraphicArticle Citation - WoS: 20Citation - Scopus: 25Indoor Air Partitioning of Synthetic Musk Compounds: Gas, Particulate Matter, House Dust, and Window Film(Elsevier, 2020) Balcı, Esin; Genişoğlu, Mesut; Sofuoğlu, Sait Cemil; Sofuoğlu, AysunDue to diversity of contaminants indoors and complexity in the physical structure of particulate matter, partition process of chemicals affects indoor concentration distribution. Synthetic Musk Compounds (SMCs) are ubiquitously found in household and personal care products, thus, in the environment. Exposure to SMCs is important for human health, therefore, their partitioning in indoor environmental media is a key issue. In this study, gas particle, house dust, andwindowfilm partitioning of SMCs were investigated in an indoor micro-environment. In a sealed and unoccupied room, a polycyclic and nitro musk mixture was left for volatilization for an hour. Then, samples were collected using XAD-2 sandwiched between two PUF plugs, glass-fiber filter, and wipes for gas, PM10, window-film, house dust phases, respectively, for 145 h. Collected samples were analyzed using a GC-MS. Results demonstrated that MC concentrations decreased over time, non-linearly. Six of the SMCs partitioned to PM10 with at least 10% at beginning of the experiment, whereas the number of compounds dropped to two at the end, showing that SMCs may partition well between the two phases but they tend to be in the gas phase. They were also detected in the film and dust phases but a decrease pattern similar to gas-particle was not observed. Spearman correlations indicate that the dust and film-associated concentrations were governed by similar processes but PM-associated concentrations were not. SMCs may be found in all phases, mainly in house dust in terms of mass among the studied media and unaccounted surface reservoirs. Therefore, their partitioning between indoor media has key implications for human exposure. (C)20 Elsevier B.V. All rights reserved.Article Citation - WoS: 5Citation - Scopus: 7Bleach-Containing Automatic Toilet-Bowl Cleaners as Sources of Vocs, Associated Indoor Air Concentrations and Carcinogenic Risk(Turkish National Committee for Air Pollution Research (TUNCAP), 2020) Ayrı, İlknur; Genişoğlu, Mesut; Gaygısız, Handan; Sofuoğlu, Aysun; Sofuoğlu, Sait CemilHousehold cleaning products are sources of volatile organic compounds (VOCs). Bleach containing products are a special case because reactions occur between chloride and their organic content such as surfactants, perfumes, etc., generating VOCs. This study aimed to determine concentration of 13 VOCs in bleach-containing automatic toilet cleaners, to estimate their indoor air concentrations and associated exposure and health risk levels. Experiments with products purchased from supermarkets were conducted in 20-mL headspace vials by placing 1 g of sample with and without water. Solid-phase micro extraction with a DVB/CAR/PDMS fiber assembly was used for adsorption of VOCs from the headspace, and analyzed using a GC-MS. The median carbon tetrachloride and chloroform concentrations of the studied products ranged from 5.03 × 10?3 to 2.37 × 10?2 ?g/g and 2.53 × 10?2 to 2.37 ?g/g, respectively. The modeled 95th percentile indoor air concentrations in a 1.6 m3 bathroom with no ventilation were estimated to be 1 and 20 ?g/m3 for carbon tetrachloride and chloroform, respectively. The 95th percentile carcinogenic risk associated even with the use of the highest content product, 3.72 × 10?7 and 8.62 × 10?7 for carbon tetrachloride and chloroform respectively, were below the acceptable risk. In conclusion, automatic toilet-bowl cleaners were found to be sources of VOCs, but their emission potentials are not high to cause considerable indoor air concentrations over their suggested product lifetime. In turn, carcinogenic risks associated with inhalation exposure are below the de Minimis risk level of 10?6. © 2020Article Citation - WoS: 15Citation - Scopus: 19Brominated Flame Retardants in a Computer Technical Service: Indoor Air Gas Phase, Submicron (pm1) and Coarse (pm10) Particles, Associated Inhalation Exposure, and Settled Dust(Elsevier Ltd., 2019) Genişoğlu, Mesut; Sofuoğlu, Aysun; Kurt Karakuş, Perihan Binnur; Birgül, Aşkın; Sofuoğlu, Sait CemilBrominated flame retardants (BFRs) are found in multi-media indoors, therefore, may pose serious risks to human health. This study investigated the occurrence of BFRs in particulate matter (PM1 and PM10) and gas phase by active and passive sampling, and settled dust to estimate potential exposure in a computer technical service. Polybrominated diphenyl ethers (PBDEs) and their alternatives (novel BFRs, NBFRs) were studied. PM and gas phase were collected on glass fiber filters and polyurethane foam plugs, respectively, and analyzed with a GC/MS after extraction, clean-up, and concentration. Inhalation exposure of the staff was estimated based on the measured concentrations using Monte Carlo simulation. BDE-209 was the dominating PBDE congener in all media while bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate and 1,2-bis(2,4,6-tribromophenoxy)ethane were those of NBFRs. Submicron particulate matter (PM1) BFR levels constituted about one half of the PM10-associated concentrations, while average PM10 mass concentration (69.9 μg m−3) was nine times that of PM1 (7.73 μg m−3). Calculated log10 dust-gas and PM-gas partitioning coefficients ranged from −5.03 to −2.10, −2.21 to −0.55, and −2.26 to −1.04 for settled dust, PM10, and PM1, respectively. The indoor/outdoor concentration ratios were >1 for all compounds indicating the strength of indoor sources in the service. The estimated potential inhalation exposures, for future chronic-toxic and carcinogenic risk assessments, indicated that the levels of gas-phase and PM1-associated exposures were similar at approximately one half of PM10-associated levels. Results of this study indicate that the occurrence of BFRs in all studied media should be taken into consideration for occupational health mitigation efforts.Article Citation - WoS: 27Citation - Scopus: 28Fast Formation of Nitro-Pahs in the Marine Atmosphere Constrained in a Regional-Scale Lagrangian Field Experiment(American Chemical Society, 2019) Mulder, Marie D.; Dumanoğlu, Yetkin; Efstathiou, Christos; Kukucka, Petr; Matejovicova, Jana; Maurer, Christian; Pribylova, Petra; Prokes, Roman; Sofuoğlu, Aysun; Sofuoğlu, Sait Cemil; Wilson, Jake; Zetzsch, Cornelius; Wotawa, Gerhard; Lammel, GerhardPolycyclic aromatic hydrocarbons (PAHs) and some of their nitrated derivatives, NPAHs, are seemingly ubiquitous in the atmospheric environment. Atmospheric lifetimes may nevertheless vary within a wide range, and be as short as a few hours. The sources and sinks of NPAH in the atmosphere are not well understood. With a Lagrangian field experiment and modeling, we studied the conversion of the semivolatile PAHs fluoranthene and pyrene into the 2-nitro derivatives 2-nitrofluoranthene and 2-nitropyrene in a cloud-free marine atmosphere on the time scale of hours to 1 day between a coastal and an island site. Chemistry and transport during several episodes was simulated by a Lagrangian box model i.e., a box model coupled to a Lagrangian particle dispersion model, FLEXPART-WRF. It is found that the chemical kinetic data do capture photochemical degradation of the 4-ring PAHs under ambient conditions on the time scale of hours to 1 day, while the production of the corresponding NPAH, which sustained 2-nitrofluoranthene/fluoranthene and 2-nitropyrene/pyrene yields of (3.7 ± 0.2) and (1.5 ± 0.1)%, respectively, is by far underestimated. Predicted levels of NPAH come close to observed ones, when kinetic data describing the reactivity of the OH-adduct were explored by means of theoretically based estimates. Predictions are also underestimated by 1-2 orders of magnitude, when NPAH/PAH yields reported from laboratory experiments conducted under high NOx conditions are adopted for the simulations. It is concluded that NPAH sources effective under low NOx conditions, are largely underestimated.Article Citation - WoS: 91Citation - Scopus: 95Source Apportionment and Carcinogenic Risk Assessment of Passive Air Sampler-Derived Pahs and Pcbs in a Heavily Industrialized Region(Elsevier Ltd., 2018) Çetin, Banu; Yurdakul, Sema; Güngörmüş, Elif; Öztürk, Fatma; Sofuoğlu, Sait CemilCancer has become the primary reason of deaths in Dilovasi probably due to its location with unique topography under the influence of heavy industrialization and traffic. In this study, possible sources and carcinogenic health risks of PAHs and PCBs were investigated in Dilovasi region by Positive Matrix Factorization (PMF) and the USEPA approach, respectively. PAHs and PCBs were measured monthly for a whole year at 23 sampling sites using PUF disk passive samplers. Average ambient air concentrations were found as 285 ± 431 ng/m 3 and 4152 ± 6072 pg/m 3 , for Σ 15 PAH and Σ 41 PCB, respectively. PAH concentrations increased with decreasing temperature especially at urban sites, indicating the impact of residential heating in addition to industrial activities and traffic. On the other hand, PCB concentrations mostly increased with temperature probably due to enhanced volatilization from their sources. Possible sources of PAHs were found as emissions of diesel and gasoline vehicles, biomass and coal combustion, iron and steel industry, and unburned petroleum/petroleum products, whereas iron-steel production, coal and biomass burning, technical PCB mixtures, and industrial emissions were identified for PCBs. The mean carcinogenic risk associated with inhalation exposure to PAHs and PCBs were estimated to be >10 −6 and >10 −5 , respectively, at all sampling points, while the 95th percentile was >10 −5 at 15 of 23 and >10 −4 at 8 of 23 sampling locations, respectively. Probabilistic assessment showed, especially for PCBs, that a majority of Dilovasi population face significant health risks. The higher risks due to PCBs further indicated that PCBs and possibly other pollutants originating from the same sources such as PBDEs and PCNs may be an important issue for the region.