Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
4 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 6Use, Preparation, and Characterization of Copper-Containing Silica Gel(American Chemical Society, 2020) Ulutan, Sevgi; Tüzüm Demir, Ayşe Pınar; Balköse, DevrimThe preparation and characterization of humidity-indicating silica gel containing copper sulfate were aimed at in the present study. The equilibrium and kinetics of Cu(II) sorption were investigated by contacting 200-1600 mg dm(-3) Cu ion-containing solutions with silica hydrogel slabs having 10% silica. The diffusion coefficient of Cu(II) in silica hydrogel was determined to be on the order of 10(-10) m(2) s(-1). X-ray diffraction indicated that the gels contained mainly CuSO4 center dot 3H(2)O, CuSO4 center dot H2O, and small amounts of CuSO4 and CuSiO3 center dot 2H(2)O. The silica gel with Cu(II) can be used as a humidity indicator since its color changes from light blue to dark blue upon moisture adsorption.Article Citation - WoS: 5Citation - Scopus: 5Methylene Blue Adsorption From Aqueous Solutions To Flexible Poly(vinyl Chloride) Silica Composites(John Wiley and Sons Inc., 2015) Yetgin, Senem; Ulutan, Sevgi; Balköse, DevrimMethylene blue (MB) adsorption studies were performed with poly(vinyl chloride)-(dioctyl phthalate)-silica composites, which were obtained by using plastisol-plastigel technology. The films were flexible, having elastic modulus of 1.0-1.5 GPa. Diminishing MB concentration in the aqueous phase was followed as the adsorption process advanced by using visible spectroscopy. Contributions of the individual components of the composites to adsorption were also investigated. Although the MB adsorption capacity was extensively high for silica, it was moderate for the composite, most likely owing to the occlusion of pores of silica by plasticizer to some extent. The improvement of MB adsorption capacity of the composites as the silica ratio increased was explicitly deduced from the optical microscopy photographs. The diffusion coefficients of MB through the composites were 5 × 10-13, 6 × 10-13, and 3 × 10-13 m2 s-1 with regression coefficients of 0.73, 0.89, and 0.88 for 0, 2, and 16% silica-containing composites, respectively. Because of the slow diffusion of MB in poly(vinyl chloride)-silica composites, using them as dynamic column adsorbent was not practical. However, these versatile plastics can be used as plastic labels, colored clothing, leather substitutes, antimicrobial medical devices, and laser printable surfaces.Article Citation - WoS: 1Citation - Scopus: 1Flexible Pvc-Silica Composites as an Adsorptive Material for Water Soluble Dyes(Smithers Rapra Technology, 2013) Ulutan, Sevgi; Yetgin, Senem; Balköse, DevrimMethylene Blue (MB) adsorption studies were performed on flexible Polyvinyl Chloride/Silica composites which were obtained by using plastisol-plastigel technology. Change of MB concentration in aqueous phase as the adsorption process advanced was followed by using visible spectroscopy. The diffusion of MB through the composites exhibited non-Fickian behavior with a diffusivity of 10-11 m2s-1. Making use of such PVC-silica composite sheets as column packing, the packing time will be reduced and the surface available for diffusion will be increased. © 2013 Smithers Rapra Technology.Article Citation - WoS: 13Citation - Scopus: 15A Study of Adsorption of Water Vapour on Wool Under Static and Dynamic Conditions(Springer Verlag, 1998) Ülkü, Semra; Balköse, Devrim; Çağa, Tayfun; Özkan, Fehime; Ulutan, SevgiAdsorption of water vapour on wool provides not only textile comfort, but also convenience in transportation due to increase in its bulk density. The adsorption and desorption isotherms of water vapour for wool were determined by both volumetric technique using a Coulter Omnisorp 100CX instrument and gravimetric method employing a Cahn 2000 electronic microbalance. Adsorption isotherm fitting to B.E.T. model and hysteresis on desorption was observed. The average effective diffusion coefficient of water in wool was found to be 8.4 × 10-14 m2 s-1 at 25°C from gravimetric data. The effects of packing height and air velocity on the breakthrough curves were also investigated in the wool packed columns. For pseudo first order model, k values changing between 0.33 × 10-6 -69 × 10-6 s-1 was obtained for 2.2-6.4 cm s-1 air velocity and 0.05-0.20 m packing height ranges.