Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
5 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 5Methylene Blue Adsorption From Aqueous Solutions To Flexible Poly(vinyl Chloride) Silica Composites(John Wiley and Sons Inc., 2015) Yetgin, Senem; Ulutan, Sevgi; Balköse, DevrimMethylene blue (MB) adsorption studies were performed with poly(vinyl chloride)-(dioctyl phthalate)-silica composites, which were obtained by using plastisol-plastigel technology. The films were flexible, having elastic modulus of 1.0-1.5 GPa. Diminishing MB concentration in the aqueous phase was followed as the adsorption process advanced by using visible spectroscopy. Contributions of the individual components of the composites to adsorption were also investigated. Although the MB adsorption capacity was extensively high for silica, it was moderate for the composite, most likely owing to the occlusion of pores of silica by plasticizer to some extent. The improvement of MB adsorption capacity of the composites as the silica ratio increased was explicitly deduced from the optical microscopy photographs. The diffusion coefficients of MB through the composites were 5 × 10-13, 6 × 10-13, and 3 × 10-13 m2 s-1 with regression coefficients of 0.73, 0.89, and 0.88 for 0, 2, and 16% silica-containing composites, respectively. Because of the slow diffusion of MB in poly(vinyl chloride)-silica composites, using them as dynamic column adsorbent was not practical. However, these versatile plastics can be used as plastic labels, colored clothing, leather substitutes, antimicrobial medical devices, and laser printable surfaces.Article Citation - WoS: 11Citation - Scopus: 12Calf Thymus Dna Characterization and Its Adsorption on Different Silica Surfaces(Royal Society of Chemistry, 2015) Yetgin, Senem; Balköse, DevrimDNA adsorption is the initial stage of gene therapy for drug delivery systems and solid phase extraction methods of DNA purification. High pore volume and high adsorption capacity are simple requirements not only for producing 'smart' drug delivery systems but also the development of purification kits. Silica is the most used material for this purpose. The present study aimed at elucidating the calf thymus DNA biosorption process by the characterization of calf thymus DNA and silica to increase the efficiency of the currently used silica material. Mesoporous silica has long been used for DNA adsorption and silica aerogel is the new adsorbent investigated in the present study. When DNA solution was freeze dried on a silica wafer, self-assembled super helices formed as shown by atomic microscopy (AFM). Thus DNA existed not as single molecules but as large sized agglomerates in water. Thus it could be adsorbed in the macropores and on the external surface of adsorbents. Adsorption of calf thymus DNA to a silica aerogel, a mesoporous silica gel and a silica wafer was investigated in the present study. Silica aerogel was synthesized from TEOS by a supercritical ethanol drying process. The DNA adsorption capacity of the silica aerogel was nearly two times that of the mesoporous silica gel due to its macroporous structure and its higher silanol content. Silica aerogel was found to be a very promising material for DNA adsorption. Therefore silica aerogel can be considered as a good candidate for the delivery of DNA.Article Citation - Scopus: 1Optical and Surface Properties of Zinc Oxide Nanoparticles Dried by Conventional and Supercritical Ethanol Drying Techniques(Research India Publications, 2014) Egbuchunam, Theresa Obuajulu; Yetgin, Senem; Özmıhçı Ömürlü, Filiz; Balköse, DevrimZinc oxide (ZnO) nanoparticles were synthesized by conventional (ZnO-A) and supercritical ethanol drying (ZnO-B). Nitrogen adsorption/desorption analyses were performed to determine the surface areas of the powders. The specific surface area was 28.30m2/g and 10.61 m2/g for ZnO-A and ZnO-B respectively. The powders adsorbed very small amount of CO2with the conventionally dried powder adsorbing more CO2. Supercritical ethanol dried ZnO had ethanol on its surface which was eliminated by vacuum application at room temperature. Both powders had OH groups which were eliminated on heating up to 500°C under vacuum. However, OH groups were present in lower amounts in supercritical ethanol dried ZnO. The powders were characterized by UV-VIS optical absorption and room temperature photoluminescence spectroscopic analyses. The UV-VIS absorption spectrum showed an absorption band at 375nm due to ZnO nanoparticles. The photoluminescence spectrum of ZnO excited at 380nm exhibited three emission peaks: one at 424nm and 490nm corresponding to band gap excitonic emission and another located at 520nm due to the presence of singly ionized oxygen vacancies.Article Citation - WoS: 1Citation - Scopus: 1Flexible Pvc-Silica Composites as an Adsorptive Material for Water Soluble Dyes(Smithers Rapra Technology, 2013) Ulutan, Sevgi; Yetgin, Senem; Balköse, DevrimMethylene Blue (MB) adsorption studies were performed on flexible Polyvinyl Chloride/Silica composites which were obtained by using plastisol-plastigel technology. Change of MB concentration in aqueous phase as the adsorption process advanced was followed by using visible spectroscopy. The diffusion of MB through the composites exhibited non-Fickian behavior with a diffusivity of 10-11 m2s-1. Making use of such PVC-silica composite sheets as column packing, the packing time will be reduced and the surface available for diffusion will be increased. © 2013 Smithers Rapra Technology.Article Citation - WoS: 21Citation - Scopus: 23Activated Carbon Adsorption of Fuel Oxygenates Mtbe and Etbe From Water(Springer Verlag, 2009) İnal, Fikret; Yetgin, Senem; Aksu, Gülsüm T.; Şimşek, Selvi; Sofuoğlu, Aysun; Sofuoğlu, Sait CemilThe aqueous phase adsorption of fuel oxygenates methyl tertiary butyl ether (MTBE) and ethyl tertiary butyl ether (ETBE) onto commercially available granular activated carbon (GAC; Norit GAC 1240) was investigated in a batch system at 27°C. The oxygenate concentrations were determined by headspace gas chromatography/mass spectrometry analyses. The experimental data were used with four two-parameter isotherm models (Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich) and two kinetic models (pseudo first-order and pseudo second-order) to determine equilibrium and kinetic parameters. Considering the correlation coefficient and root mean square error, Dubinin-Radushkevich isotherm showed better fit with the equilibrium data for MTBE. However, the performances of Langmuir and Dubinin-Radushkevich models were comparable for ETBE. The adsorption capacities were calculated as 5.50 and 6.92 mg/g for MTBE and ETBE, respectively, at an equilibrium solution concentration of 1 mg/L using Dubinin-Radushkevich isotherm. The differences between the model predictions and experimental data were similar for the pseudo first-order and pseudo second-order kinetic models. Gibbs free-energy changes of adsorption were found to be -22.59 and -28.55 kJ/mol for MTBE-GAC and ETBE-GAC systems, respectively, under the experimental conditions studied.