Chemical Engineering / Kimya Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/14

Browse

Filters

20223

Settings

COAR Access Rights: search.filters.coarAccessRights.embargoed accessWoS Q: search.filters.wosQuartile.Q3

Search Results

Now showing 1 - 3 of 3
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    Microfluidic-Assisted Preparation of Nano and Microscale Chitosan Based 3d Composite Materials: Comparison With Conventional Methods
    (Wiley, 2022) Kimna, Ceren; Değer, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, Funda
    Although nanofillers contribute to improved physical characteristics and biological functionalities of polymer-based biomaterials, their dispersion in polymer matrices is still a challenging issue in terms of obtaining consistency for the inherent properties. To tackle this problem, homogenization techniques are applied to disperse the nanofillers in such polymers, however, these methods can cause undesired changes especially in the rheological properties and the physical structure of the biopolymer matrices. Recently, as a novel homogenization technique, microfluidization has been used to homogenize polymer nanocomposites to minimize these limitations. In this study, two different nanocomposite structures as chitosan/montmorillonite (CS/MMT) and chitosan/polyhedral oligomeric silsesquioxane nanocages (CS/POSS) were homogenized with microfluidization and investigated in terms of physical alterations. Furthermore, the effect of microfluidizer technique on material characteristics was compared with conventional homogenization techniques, i.e., ultrasonic bath and sonication in terms of solution, nano – (e.g., hydrodynamic size, drug encapsulation) and macroscopic material characteristics (e.g., porosity, mechanical properties, swelling and thermal degradation). It was found that the microfluidizer homogenization improves the physical characteristics in both nano and macroscale materials: Nanospheres obtained from CS/MMT composites showed enhanced stability, uniform size distribution (<100 nm, PDI: [removed]50%) whereas 3D porous CS/POSS scaffolds showed improved structural uniformity (i.e., homogeneous and interconnected microstructure) and enhanced thermal and mechanical properties. The obtained results indicate that the microfluidizer homogenization ensures a successful nanofiller dispersion in polymer matrices, thereby improving the biomaterial characteristics impressively compared to the sonication methods.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 5
    Novel Biopolymer-Based Hydrogels Obtained Through Crosslinking of Keratose Proteins Using Tetrakis(hydroxymethyl) Phosphonium Chloride
    (Springer, 2022) Yalçın, Damla; Top, Ayben
    Merino wool obtained from the Karacabey region of Turkey was solubilized using peracetic acid oxidation. The wool and extracted wool proteins (keratose) were characterized using SEM, XRD, TGA, and FTIR analyses. SDS-PAGE result of the keratose indicated diffusive bands were populated between ~ 40 and ~ 55 kDa, corresponding to low-sulfur content α-keratose proteins. Chemically crosslinked hydrogels were prepared using the keratose and tetrakis(hydroxymethyl) phosphonium chloride (THPC). Storage moduli of the hydrogels prepared at 1:1, 1:2, and 1:4 keratose to THPC reactive group ratios were measured as 63 ± 22, 291 ± 21, and 804 ± 53 Pa, respectively. Crosslinking degrees of the hydrogels also affected the secondary structures of the keratose films obtained from the drying of the hydrogels. The hydrogel with the highest crosslinking density (1:4 gel) exhibited the lowest swelling ratio, whereas the one with the lowest crosslinking density (1:1 gel) disintegrated in deionized water within less than 6 h. CCK-8 tests using L929 mouse fibroblast cells showed that all the hydrogels promoted cell proliferation. These results suggest THPC crosslinked hydrogels prepared at the millimolar THPC concentrations are biocompatible scaffolds, which can be utilized in drug delivery and tissue engineering applications. Graphical abstract: [Figure not available: see fulltext.]
  • Article
    Citation - WoS: 7
    Citation - Scopus: 11
    Hydrophobic Deep Eutectic Solvent Effect on Acrylic Acid Separation From Aqueous Media by Using Reactive Extraction and Modeling With Response Surface Methodology
    (Taylor & Francis, 2022) Lalikoğlu, Melisa; Aşçı, Yavuz Selim; Sırma Tarım, Burcu; Yıldız, Mahmut; Arat, Refik
    Hydrophobic deep eutectic solvents (HDES) are new-generation green solvents that have emerged in recent years. In this study, the efficiency of using HDES as a solvent in separating acrylic acid from its aqueous solution by reactive extraction method was investigated. As a solvent, HDES prepared with a mixture of TOPO and menthol has been used for the recovery of acrylic acid for the first time. Physical properties of HDES mixtures such as density, viscosity, and refractive index were determined. In reactive extraction experiments, TOPO, one of the two basic components in the solvent, was also employed as an extractant. With the help of response surface methodology based on Box-Behnken design, the effect of the parameters of amount of extractant (0.1–0.9 g), Menthol/TOPO molar ratio (2–4), and initial acid concentration (3–9%) on the distribution coefficient was investigated and the model equation was formed. The highest distribution coefficient (D = 7.8) was achieved with the molar ratio of Menthol/TOPO is 2. Upon examining all the results obtained, it was seen that more than 90% of acrylic acid could be extracted from the aqueous phase to the organic phase.