Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
197 results
Search Results
Conference Object Citation - WoS: 24Effect of pH and Hydration on the Normal and Lateral Interaction Forces Between Alumina Surfaces(2006) Polat, Mehmet; Sato, Kimiyasu; Nagaoka, Takaaki; Watari, KojiNormal and lateral interaction forces between alumina surfaces were measured using Atomic Force Microscopy-Colloid Probe Method at different pH. The normal force curves exhibit a well-defined repulsive barrier and an attractive minimum at acidic pH and the DLVO theory shows excellent agreement with the data. The normal forces are always repulsive at basic pH and the theory fails to represent the measurements. Lateral forces are almost an order of magnitude smaller in the basic solutions. These differences, which have important implications in the study of stability and rheology, are attributed to the hydration of the alumina surface at basic pH. © 2013 Elsevier B.V., All rights reserved.Article Citation - Scopus: 1Visualization of Equilibrium Fcc Catalyst Surface by Afm and Semeds(American Chemical Society, 2003) Bayraktar, Oğuz; Erdoğan, Gani; Kugler, Edwin L.[No abstract available]Conference Object Effect of Some Physical, and Chemical Variables on Flocculation and Sediment Behaviour(A.A. Balkema Publishers, 2000) Polat, Hürriyet; Polat, Mehmet; İpekoğlu, ÜnerEffect of some chemical and physical variables on the settling rate, final sediment height, sediment viscosity and supernatant turbidity of a clay sample was studied using various polyacrylamide type flocculants. Increasing flocculant concentration significantly increased both the settling rate and sediment viscosity. More importantly, changes in the final sediment, height, hence the packing density, was minimal for all the conditions tested once the sediment was allowed to consolidate. Also, the mode of addition of the polymer, at once or continuous, did not seem to affect any of the parameters measured. Conditioning time seemed to alter the settling rate at low polymer concentrations, but had no effect at high polymer concentrations. However, increasing the conditioning time caused a decrease in the sediment viscosity. Different types of the polyacrylimides generated different settling rates at a given concentration, but the final sediment height was nearly independent of polymer type.Conference Object Visualization of Equilibrium Fcc Catalyst Surface by Afm and Sem-Eds(American Chemical Society, 2003) Bayraktar, Oğuz; Erdoğan, G.; Kugler, Edwin L.[No abstract available]Conference Object Antioxidant, Antimicrobial and Cytotoxic Activities of Some Turkish Plant Extracts(John Wiley and Sons Inc., 2006) Altıok, Evren; Asbagh, L. Abbasi; Bulut, Çisem; Ülkü, Semra; Bayraktar, OğuzPlant extracts have been known to possess notable biological activity, including antioxidant, antimicrobial and cytotoxic properties. There is a growing interest in the use of natural products in the human food industries as consumer resistance to synthetic additives increases. These products can be used to improve human health. In vitro antioxidant, antimicrobial and cytotoxic activities of ethanol extracts of some plants from Urla region in Turkey were investigated. Plant materials were collected from Pistacia lentiscus, Vitex agnus-castus, Cistus creticus and Nerium oleander in October, November and December.Article Citation - WoS: 8Citation - Scopus: 9Polymeric Thermal Analysis of C+h and C+h+ar Ion Implanted Uhmwpe Samples(Elsevier Ltd., 2007) Kaya, N.; Öztarhan, Ahmet M.; Urkaç, Emel Sokullu; Ila, D.; Budak, S.; Oks, E.; Tıhmınlıoğlu, Funda; Muntele, C.Chemical surface characterization of C + H hybrid ion implanted UHMWPE samples were carried out using DSC (differential scanning calorimeter) and TGA (thermal gravimetric analysis) techniques. Samples were implanted with a fluence of 10(17) ion/cm(2) and an extraction voltage of 30 kV. The study of TGA and DSC curves showed that: (1) Polymeric decomposition temperature increased, (2) T-m, Delta C-p and Delta H-m values changed while Delta C-p and Delta H-m increased. T-g value could not be measured, because of some experimental limitations. However, the increase in Delta H-m values showed that T-g values increased, (3) the branch density which indicated the increase in number of cross-link (M-c) decreased in ion implanted samples and (4) increase in Delta H-m values indicated increase in crystallinity of implanted surface of UHMWPE samples.Conference Object Structural and Thermal Characterization of Ti+o Ion Implanted Ultrahigh Molecular Weight Polyethylene (uhmwpe)(American Institute of Physics, 2009) Öztarhan, Ahmet; Urkaç Sokullu, Şadiye Emel; Tıhmınlıoğlu, Funda; Kaya, N.; Ila, Daryush; Budak, S.; Nikolaev, A.In this work, Metal-Gas Hybrid Ion Implantation technique was used as a tool for the surface modification of Ultra High Molecular Weight Polyethylene (UHMWPE). Samples were Ti + O ion implanted by using Metal-Vapour Vacuum Arc (MEVVA) ion implanter to a fluence of 5x10(16) ion/cm(2) for each species and extraction voltage of 30 kV. Untreated and surface treated samples were investigated by Rutherford Back Scattering (RBS) Spectrometry, Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR) Spectroscopy, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Results indicate that Ti + O ion implantation can be applied on UHMWPE surfaces successfully. ATR-FTIR spectra indicate that the C-H concentration on the surface decreased after Ti + O implantation. Thermal characterization with TGA and DSC shows that polymeric decomposition temperature is shifted after ion implantation.Conference Object Solution of the Non-Linear Poisson Boltzmann Theory for the General Case of Dissimilar Double Layers(2006) Polat, MehmetCalculation of the surface potentials, surface charges or electrostatic pressure for interacting colloidal particles is exceedingly important in mineral processing, environmental engineering, ceramic sciences, etc. Such calculations require solving the non-linear Poisson-Boltzmann theory at each plate separation. Though approximate analytical solutions of this theory are available for simplified cases, a general, but compact analytical solution is yet to be developed. A solution with no restrictions on surface potentials or charges is developed in this paper. The expressions developed are straightforward and require as input only the surface potentials at infinite separations.Conference Object Heavy Metal Removal Using Natural Zeolite Packed Ion Exchange Column(American Chemical Society, 2008) Balköse, Devrim; Ülkü, Semra[No abstract available]Article Citation - WoS: 2Catalytic Activity of Heteropolytungstic Acid Encapsulated Into Mesoporous Material Structure(Walter de Gruyter GmbH, 2007) Gündüz, Gönül; Dimitrova, Rayna P.; Yılmaz, SelahattinThe paper presents a spectroscopic and catalytic study of encapsulated Keggin type heteropoly acid (12-tungstophosphoric acid, HPW) in the mesopores of MCM-41 molecular sieves. Nitrogen physisorption, FTIR, SEM, XRD and catalytic methods have been used to characterize and compare the properties of the samples. Methanol conversion, alpha-pinene isomerization and ethyl acetate oxidation have been applied as model reactions for the evaluation of acid site activity. The combined physicochemical and catalytic investigations clearly show that the introduction of 12-tungstophosphoric acid into MCM-41 causes significant changes in the properties of the sample.