Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
198 results
Search Results
Conference Object Citation - WoS: 24Effect of pH and Hydration on the Normal and Lateral Interaction Forces Between Alumina Surfaces(2006) Polat, Mehmet; Sato, Kimiyasu; Nagaoka, Takaaki; Watari, KojiNormal and lateral interaction forces between alumina surfaces were measured using Atomic Force Microscopy-Colloid Probe Method at different pH. The normal force curves exhibit a well-defined repulsive barrier and an attractive minimum at acidic pH and the DLVO theory shows excellent agreement with the data. The normal forces are always repulsive at basic pH and the theory fails to represent the measurements. Lateral forces are almost an order of magnitude smaller in the basic solutions. These differences, which have important implications in the study of stability and rheology, are attributed to the hydration of the alumina surface at basic pH. © 2013 Elsevier B.V., All rights reserved.Article Citation - Scopus: 1Visualization of Equilibrium Fcc Catalyst Surface by Afm and Semeds(American Chemical Society, 2003) Bayraktar, Oğuz; Erdoğan, Gani; Kugler, Edwin L.[No abstract available]Article Citation - WoS: 8Citation - Scopus: 9Polymeric Thermal Analysis of C+h and C+h+ar Ion Implanted Uhmwpe Samples(Elsevier Ltd., 2007) Kaya, N.; Öztarhan, Ahmet M.; Urkaç, Emel Sokullu; Ila, D.; Budak, S.; Oks, E.; Tıhmınlıoğlu, Funda; Muntele, C.Chemical surface characterization of C + H hybrid ion implanted UHMWPE samples were carried out using DSC (differential scanning calorimeter) and TGA (thermal gravimetric analysis) techniques. Samples were implanted with a fluence of 10(17) ion/cm(2) and an extraction voltage of 30 kV. The study of TGA and DSC curves showed that: (1) Polymeric decomposition temperature increased, (2) T-m, Delta C-p and Delta H-m values changed while Delta C-p and Delta H-m increased. T-g value could not be measured, because of some experimental limitations. However, the increase in Delta H-m values showed that T-g values increased, (3) the branch density which indicated the increase in number of cross-link (M-c) decreased in ion implanted samples and (4) increase in Delta H-m values indicated increase in crystallinity of implanted surface of UHMWPE samples.Conference Object Hidrofobik İlaç Taşıyıcısı Olarak Akrilik Yıldız Blok Kopolimerler(Institute of Electrical and Electronics Engineers Inc., 2009) Genç, Gözde; Batıgün, Ayşegül; Bayraktar, Oğuz; Altıntaş, Özcan; Tunca, Ümit; Hizal, GürkanAmphiphilic poly(methyl methacrylate)-b-poly(acrylic acid) (PMMA-b-PAA) copolymers with 4 and 6 arms were synthesized by Atomic Transfer Radical Polymerization (ATRP). The polymers were characterized by GPC, H-NMR and FTIR analysis. Polymer samples synthesized at various molecular weights between 18-80 kDa were investigated in terms of maximum loading capacity and critical micelle concentration by fluorescence spectroscopy. 4 arm PMMA-b-PAA (MW 30 kDa) was loaded with hydrophobic model drug indomethacin with an extremely high drug loading efficiency (22.5% drug content). Drug loaded polymer formed a stable and biodegradable complex in aqueous medium.Conference Object Structural and Thermal Characterization of Ti+o Ion Implanted Ultrahigh Molecular Weight Polyethylene (uhmwpe)(American Institute of Physics, 2009) Öztarhan, Ahmet; Urkaç Sokullu, Şadiye Emel; Tıhmınlıoğlu, Funda; Kaya, N.; Ila, Daryush; Budak, S.; Nikolaev, A.In this work, Metal-Gas Hybrid Ion Implantation technique was used as a tool for the surface modification of Ultra High Molecular Weight Polyethylene (UHMWPE). Samples were Ti + O ion implanted by using Metal-Vapour Vacuum Arc (MEVVA) ion implanter to a fluence of 5x10(16) ion/cm(2) for each species and extraction voltage of 30 kV. Untreated and surface treated samples were investigated by Rutherford Back Scattering (RBS) Spectrometry, Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR) Spectroscopy, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Results indicate that Ti + O ion implantation can be applied on UHMWPE surfaces successfully. ATR-FTIR spectra indicate that the C-H concentration on the surface decreased after Ti + O implantation. Thermal characterization with TGA and DSC shows that polymeric decomposition temperature is shifted after ion implantation.Conference Object Solution of the Non-Linear Poisson Boltzmann Theory for the General Case of Dissimilar Double Layers(2006) Polat, MehmetCalculation of the surface potentials, surface charges or electrostatic pressure for interacting colloidal particles is exceedingly important in mineral processing, environmental engineering, ceramic sciences, etc. Such calculations require solving the non-linear Poisson-Boltzmann theory at each plate separation. Though approximate analytical solutions of this theory are available for simplified cases, a general, but compact analytical solution is yet to be developed. A solution with no restrictions on surface potentials or charges is developed in this paper. The expressions developed are straightforward and require as input only the surface potentials at infinite separations.Conference Object Heavy Metal Removal Using Natural Zeolite Packed Ion Exchange Column(American Chemical Society, 2008) Balköse, Devrim; Ülkü, Semra[No abstract available]Conference Object Citation - Scopus: 4Trans-resveratrol’ün Kitosan Mikroküreler İçerisindeki Kararlılığı(Institute of Electrical and Electronics Engineers Inc., 2009) Altıok, Duygu; Altıok, Evren; Bayraktar, Oğuz; Tıhmınlıoğlu, Fundatrans-Resveratrol, (3,5,4?-trihydroxy-trans-stilbene), a phenolic compound present in some plant species, have been shown to posses antioxidative, anticarcinogenic and antitumour properties. However, under UV light, it turns into -cis form and looses its bioactivity.This study aims to increase the stability of trans-resveratrol by loading it into chitosan microspheres. Within this context, the trans-resveratrol loaded chitosan microspheres was produced by spray drying and then the resultant microspheres were characterized. The particle size and the surface morphology of resultant microspheres were investigated by scanning electron microscope (SEM) and the thermal properties were determined by thermogravimetry analyser(TGA). The stability of free and that of inside the microspheres was determined by high performance liquid chromatography (HPLC). It was found that the stability of trans-resveratrol incorporated into chitosan microspheres kept constant. ©2009 IEEE.Conference Object Citation - Scopus: 1Yapay Sindirim Sıvısında Doğal Zeolitlerde Meydana Gelen Morfolojik Değişmeler(Institute of Electrical and Electronics Engineers Inc., 2009) Demirbüker Kavak, Dilek; Özçelik, Serdar; Ülkü, SemraDoğal zeolitler biyoaktif maddelerdir. Doğal zeolitlerin hayvanlarda biyokütle arttırıcı besi katkı maddesi, insanlarda ülser tedavisinde mide asitliğini tamponlayıcı, asitliği düşürücü ilaç gibi değişik kullanım alanları mevcuttur. Değişik sağlık alanlarında kullanımlarından dolayı, zeolitlerin yapısal stabilitesinin sindirim sırasında belirlenmesi; olası olumlu veya olumsuz etkileşimleri anlamak açısından önem taşımaktadır. Gerçekleştirilen araştırmada, yapay sindirim sırasında zeolitte meydana gelebilecek olası morfolojik değişimlerin incelenmesi hedeflenmiştir. Bu amaçla zeolitin ABTS ile radikal sönümleme kapasitesi araştırılmış, yapay sindirim denemeleri gerçekleştirilerek de uygulama süreci sonrası yapıda olası değişimler ve adsorpsiyonlar taramalı elektron mikroskobu, FTIR, XRD analizleri ile incelenmiştir. 3g/100ml zeolitin ABTS radikalini %45 inhibe ettiği bulunmuştur. Taramalı elektron mikroskobu deneyleri sonucunda yapay sindirilmiş örneklerin yüzey morfolojisinde değişim gözlenmemiştir. Element analizleri yapısal kaybın olmadığını, Al ve Si elementlerinin ağırlıkça yüzdelerinin, kontrol örnekleriyle (Al:8.1; Si: 39) sindirilmiş örneklerde (Al:8.2; Si: 38.3) yaklaşık aynı olduğunu göstermiştir. Infrared spektrum (IR) ve X-ray ışını kırınımı analizleri sonuçları ise bu bulguları doğrulamıştır. Ayrıca taramalı elektron mikroskobu ve IR spektrum sonuçları yapay sindirim ortamındaki maddelerin, zeolit yüzeyinde adsorplanmadıklarıını göstermektedir. Sonuç olarak doğal zeolitler, yapay sindirim sırasında yapısal stabilitelerini kaybetmemektedirler.Article Citation - WoS: 5Citation - Scopus: 8A Research on the Production of Silk Sericin Powders by Using Spray Drying Method(Ege Üniversitesi, 2009) Genç, Gözde; Bayraktar, Oğuz; Başal, GüldemetSericin protein is usually discarded as a waste in silk industry. Production of silk sericin powders, which can be incorporated into fibers used in textile industry, by spray drying method will enable value-added utilization of waste sericin. in this study aqueous sericin solutions were used as raw material for the production of dry powders using a lab-scale spray dryer. A linear regression analyses were employed, in addition to experimental design at two levels with three factors for the analysis of three responses: moisture content, particle type and agglomeration degree. The process factors were the drying air temperature (120°C and 160°C), the feed rate (1.25x10-4 and 2.5x10-4 dms -), and the concentration of sericin solutions of 10% and 30% (w/w) fed to the spray dryer. The three responses were analyzed statistically to determine the effective parameters and it was concluded that moisture content depended on three factors-drying air temperature being the dominant parameter. Particle size and shape depended mainly on feed rate and agglomeration depended on the moisture content of the product.